• 한국지반공학회논문집
• /
• 제26권4호
• /
• pp.37-45
• /
• 2010

기후변화로 인해 물의 증발량이 많은 지역의 지반에서는 자연적인 소금의 고결화 현상이 발생한다. 이러한 소금의 고결화 분포는 모래지반에서 모세관력에 영향을 받는다. 이 연구의 목적은 콘 관입시험, 전기전도율 측정, 사진 이미지 촬영, 비파괴 이미지 분석 그리고 탄성파에 의한 프로세스 모니터링을 이용하여 소금의 고결화 현상에 대한 모세관력의 효과를 관찰하는 것이다. 실험은 입상재료를 모형화한 글라스비즈를 소금물에 포화시킨 후, 오븐에 넣어 시료를 건조시킴으로써 고결화를 발생시켰다. 실험결과, 고결된 소금의 농도는 시료입경이 작은 경우 최상부에서 높았고, 시료입경이 큰 경우 중간 또는 하부에서 높았다. 고결된 시료에서 높은 소금농도의 위치는 해석적 방법으로 산정된 모세관 높이와 유사하였다. 본 연구에서 수행한 5가지 실험은 모세관력이 소금이 고결된 흙과 같은 입상재료의 거동에 중요한 영향을 끼치는 것을 보여준다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.255-264
• /
• 2009

Soils containing vanishing materials lead changes in the microstructure of particulate media due to water inflow. Thus, dissolution renders some local unstability. As the moisture contents decease, the component of the vanished materials may affects on the cementation of paniculate materials. This cementation phenomenon has a huge influence on the stiffness, strength and stability under lower stress level. The goal of this study is to introduce the cementation effects on a compressional wave velocity, a shear wave velocity, and the resonant frequency of shear waves. The glass bead and salt water with different mole contents are used. Test results show that the changes of shear and compressional wave velocities consist of three stages. In the first region, compressional wave velocities increase and shear wave velocities decrease with a decreases in reducing water contents from 100% to 90~95%. In the second region, shear and compressional wave velocities become stable at 90~95% to 10% of the water contents. In the third region, shear and compressional wave velocities increases dramatically with a decrease in the water content due to the capillary force and cementation of salt. Furthermore, the resonant frequency of the shear waves shows similar phenomenon. Specimens prepared by glass beads and salt water are proved to be able to provide a meaningful insight in under structural behaviors of the cementation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.472-481
• /
• 2009

Cementation phenomenon has a huge influence on geotechnical stiffness and strength under low confining pressure. The goal of this study is to evaluate the characteristics of stiffness according to the depth. The piezo disk elements are installed at each layer of the cell for the detection of the compressional waves. The change of compressional wave velocity is classified by three stages. The compressional wave velocities are shown different according to the depth. The compressional wave velocity is especially influenced by cementation, effective stress, and coordinate number. Furthermore, the electrical conductivity and cone tip resistance are measured according to the depth. The electrical conductivity and the cone tip resistance show the similar trend with the compressional wave velocity. This study shows that the cementation by salt is affected by the depth on the granular materials.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.448-456
• /
• 2010

The mechanical behavior of granular soils is affected by particle bonding including natural cementation. This study addresses a simple model of small strain stiffness and salt concentration based on wave measurements of salt-cemented particulate media. Published models of artificially cemented soils with different curing methods and several types of cementation agents are reviewed. Glass beads with the median diameter of D50 = 0.5mm are prepared in rectangular cells using the water-pluviated method in salt water with different concentrations. Piezo disk elements and bender elements embedded in the cell are used for the measurements of compressional and shear waves. The relationships between elastic wave velocities and salt concentration show an exponential function. The measured small strain stiffness matches well the predicted small strain stiffness based on micromechanics for simple cubic monosized sphere particles. This study demonstrates that the salt concentration in salt-cemented specimen may be evaluated by using elastic wave velocities.

• 한국지반공학회논문집
• /
• 제25권5호
• /
• pp.75-86
• /
• 2009

공학적 관점에서 용해가능한 가장 흔한 재료인 소금은 고결화 작용에 있어서 역학적 거동에 큰 영향을 미친다. 이러한 자연적 현상을 조사하기 위하여 용해되지 않는 재료인 글라스비즈와 소금물을 혼합하여 시료를 조성한 후 오븐을 이용하여 포화도를 변화시켜가면서 실험을 수행하였다. 입자크기가 0.26, 0.50, 1.29mm인 3종류의 글라스비즈와 0.0, 0.1, 0.2, 0.5, 1.0, 2.0M의 소금물에 대하여 각각의 시료를 조성 후 벤더 엘리먼트와 피에조 디스크 엘리먼트를 이용하여 전단파와 압축파를 측정하였다 소금에 의한 고결화 발생에서 전단파와 압축파 속도 모두 포화도에 따른 세가지 단계를 보여주었다: 1) 포차도가 $100%{\sim}90%$인 구간으로 전단파의 속도는 증가하고 압축파의 속도는 감소한다; 2) 포화도가 $90%{\sim}10%$인 구간으로 전단파와 압축파의 속도에 큰 변화가 없파; 3) 포화도가 $10%{\sim}0%$인 구간으로 전단파 및 압축파는 큰 변화를 보인다. 또한, 전단파의 공진주파수는 전단파의 속도 변화양상과 비슷한 경향을 보였다. 본 연구는 용해된 소금의 고결화에 따른 지반재료들의 탄성파 특성의 의미있는 경향을 보여준다.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3235-3241
• /
• 2022

The Korea Atomic Energy Research Institute (KAERI) is planning the construction of the KIJANG Research Reactor (KJRR) for stable supply of ⁹⁹Mo. The Fission ⁹⁹Mo Production Process (FMPP) of KJRR produces solid waste such as spent uranium cake and alumina cake, and liquid waste in the form of intermediate level liquid waste (ILLW) and low level liquid waste (LLLW). This study thus established the operating range and optimum operating conditions for the cementation of ILLW from FMPP. It also evaluated whether cement waste form samples produced under optimum operational conditions satisfy the waste acceptance criteria (WAC) of a disposal facility in Korea (Korea radioactive waste agency, KORAD). Considering economic feasibility and safety, optimum operational conditions were achieved at a w/c ratio of 0.55, and the corresponding salt content was 5.71 wt%. The cement waste form samples prepared under optimum operational conditions were found to satisfy KORAD's WAC when tested for structural stability and leachability. The results indicate that the proposed cementation conditions for the disposal of ILLW from FMMP can be effectively applied to KJRR's disposal facility.

• 한국표면공학회지
• /
• 제19권1호
• /
• pp.13-19
• /
• 1986

Manganese in the Anode slime and the paste-positive material of waste-dry cell was recovered by leaching with the hydrochloric acid solution. The impurities (Zn, Fe, Pb), co-leached with manganese were removed from the leached solution prior to electrolysis by hydrometallurgical techniques such as the neutralization with ammonium hydroxide and cementation on manganese powder. The electrodeposition of manganese from the purified chloride solution with sodium selenate was performed. Cathode current efficiency was found to be affected significantly by the concentration of sodium selenate and ammonium chloride salt, bath temperate, current density and PH. The current efficiency of about 88.7% was obtained by electrolysis manganese chloride solution with sodium selenate (0.1/g) at 10$^{\circ}C$.

• 한국전기전자재료학회논문지
• /
• 제27권6호
• /
• pp.343-349
• /
• 2014

It is summarized that potential causes of performance degradations and failure mechanisms of crystalline silicon photovoltaic (PV) modules installed in Middle East area. In addition, we also reviewed current PV module qualification test (IEC 61215) and the methods for detection of wear-out fault. The failure of PV modules in the extreme environmental conditions such as deserts is mainly due to high temperature, humidity, and dust storms. In particular, cementation phenomenon caused by combination of sand and moisture leads to rapid degradation in the performance of PV modules. In order to evaluate and guarantee the long term reliability of PV modules, specific qualification tests such as sand dust test, salt mist test and potential induce degradation test considering operating environment of PV module should be carried out.

• 한국지반공학회논문집
• /
• 제18권6호
• /
• pp.83-101
• /
• 2002

탄성파는 지표면에 가까운 흙에 관한 중요한 정보를 공급한다. 흙특성 파악에 물리탐사기법의 원활한 적용을 위하여 탄성파인자와 흙특성과의 관계를 고찰하였다. 적용 예로서, 비포화토의 거동 및 특성을 전단파 시험을 통하여 알아보았다. 포화시료를 건조하면서 밴더엘리먼트를 사용하여 미소변형률 전단강성을 연속적으로 측정하였다. 비포화토에서는 모세관현상, 이온공유에 의한 접착, 세립자 이동에 의한 강화효과, 염 침전에 의한 시멘트결합과 같은 입자간 힘의 변화가 강성의 변화에 직접적으로 영향을 끼치는 것으로 나타났다. 비포화토의 시료를 교란함으로써 메니스커스의 회복에 대한 연구를 수행하였고, 비포화토에서 일어나는 여러 가지 현상들을 제시하였다.

• 한국표면공학회지
• /
• 제32권1호
• /
• pp.67-77
• /
• 1999

The Ni base superalloy Mar-M247 substrate was aluminized or aluminized after boronizing by the pack cementation under Ar atmosphere. The hot corrosion resistance and after-heat-treatment effect of aluminized specimens were studied by the cyclic hot corrosion test in $Na_2SO_4$-NaCl molten salt. XRD analysis showed that the $Ni_2Al_3$ phase was formed between the coated layer and substrate below 1273K but the NiAl phase above 1273K. The peak of the NiAl phase was developed after heat treatment. Corrosion test showed that corrosion resistance of the specimen with the NiAl phase was better than that with the $Ni_2Al_3$ phase. Corrosion resistance could be improved by heat treatment to form ductile NiAl phase, where cracks were not formed by thermal shock on coating layer. Moreover, it appeared that heat treatment played a role to improve corrosion resistance of Al diffusion coating above 1273K. The existence of boron in the Al diffusion coating layer obstructed outwared diffusion of Cr from the substrate, and it influenced on corrosion resistance of the coating layer by weakening adherence of the oxide scale.