• 부모자녀건강학회지
• /
• 제6권2호
• /
• pp.147-158
• /
• 2003

The purpose of this study was to investigate the situation of occurrence of disease and accidence of child care center. The subjects of this study were 17 public district child care centers, but only one center kept their health diary. Therefore, it became finally the only subject for this study. The data were collected through the analysis it's health diary and case reports for emergency. The collected data were analyzed by the number of cases, age and sex, types of case, and the emergency case were analyzed by age, background, types of accidents and follow up. The number of cases of disease and accident in 2002 were 572. In sexual difference, boys more have accident than girls. The teachers and the outsiders also frequently use the health care service. Smallpox and epidemic conjunctivitis were spreaded during winter and summer. In causes of accidents, 'accident by other child' were 98%. In emergency cases, 1 pierced wound, 1 dislocation, 2 dental emergencies, 4 eyeball contusion and bleedings and 2 burns were occurred. all the cases of emergency were performed follow up education. On the basis of above data, there will be needed to intensify health and safety subjects in curriculum for the teacher of child care, and health and safety education for child. Each child care centers must have health care manager and the network for emergency. To enhance the quality of child care service, government have to offer financial and systematical support.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.176-181
• /
• 2019

2017년도 연령별 산업재해 분석에 따르면 건설업 재해자 가운데 71.8%, 사망자의 74.9%가 50세 이상으로, 건설업 고령근로자의 산업재해 심각성을 보여 주고 있다. 본 연구에서 50세 이상 건설근로자 303명과 안전관리자 178명을 대상으로 건설현장 건설업 기초안전보건교육 현황을 파악하여 교육이수자에 대한 보수교육 개선방안을 제시하여, 건설현장 고령근로자 산업재해 예방에 기여하고자 건설근로자의 안전교육에 대한 안전의식과 기초안전보건교육 개선방안에 대하여 설문조사를 실시하였다. 연구결과 첫째 고령근로자와 안전관리자간의 안전교육에 대한 안전의식 차이 비교에서는 고령근로자(M=2.09), 안전관리자(M=2.39)로 안전교육에 대한 안전의식이 건설근로자보다 안전관리자들이 더 높게 나타났다. 둘째는 건설업 기초안전보건교육에 대한 보수교육 필요성에 대해서는 응답자의 65.2%가 긍정적으로 대답했다. 세째 건설업 기초안전보건교육 이수자에 대한 보수 주기에 대한 설문에서는 70%가 정기적으로 3년 이내 보수교육이 필요하다고 분석되었다. 교육 이수 후 시간이 지나면 안전의식이 떨어지고 새로운 공법과 건설안전 환경이 변화되는 상황에서 본 연구는 건설업 기초안전보건교육이 채용 시 교육을 대체하지 못하고 있어, 선행연구에서 제시한 기초안전보건 교육방법 개선을 통한 보수교육 도입으로 이 제도가 개선 될 수 있도록 제안하고자 한다.

• 한국안전학회지
• /
• 제36권4호
• /
• pp.80-87
• /
• 2021

Risk assessment techniques are processes used to evaluate hazardous risk factors in construction sites, facilities, raw materials, machinery, and equipment, and to estimate the size of risk that could lead to injury or disease, and establish countermeasures. The most important thing in assessing risk is calculating the size of the risk. If the size of the risk cannot be calculated objectively and quantitatively, all members who participated in the evaluation would passively engage in establishing and implementing appropriate measures. Therefore, this study focused on predicting accidents that are expected to occur in the future based on past occupational accident statistics, and quantifying the size of the risk in an overview. The technique employed in this study differs from other risk assessment techniques in that the subjective elements of evaluators were excluded as much as possible by utilizing past occupational accident statistics. This study aims to calculate the size of the risk, regardless of evaluators, such as a manager, supervisor, safety manager, or employee. The size of the risk is the combination of the likelihood and severity of an accident. In this study, the likelihood of an accident was evaluated using the theory of Bud Accident Chainability, and the severity of an accident was calculated using the occupational accident statistics over the past five years according to the accident classification by the International Labor Organization.

• 한국안전학회지
• /
• 제36권4호
• /
• pp.54-61
• /
• 2021

The purpose of this paper is to verify if safety managers must bear stress from additional tasks whenmanaging smart safety technology applications on construction sites. We conducted a survey of 133 safety managers who had experienced managing both safety management and smart safety technology applications at construction sites, and used the SPSS Statistics 25 and AMOS 22 programs to analyze the survey's logicality and the data that we collected. We found that the work burden caused by assuming additional tasks to manage smart safety technology applications affected the stress that safety managers experience when working at construction sites. The stress caused by an increased work burden led construction site safety managers to feel dissatisfied with their jobs. This finding indicates that both on the original job and on additional tasks are entirely mediated. Based on this finding, I suggest that the South Korean government should establish smart safety technology applications, thus reducing the work burden and increasing the job satisfaction for construction site safety managers.

• 한국안전학회지
• /
• 제21권5호
• /
• pp.92-102
• /
• 2006

The Honorary Industrial Safety Inspector System, which is with the object of establishment of an autonomic and collaborative industrial accident prevent system, comes into force on 1995 through the administration provision of the Ministry of Labor, one year after it had legal basis. The purpose of this study is to put forward revitalization of the Honorary Industrial Safety Inspector System by using the survey(2005.05) of the Honorary Industrial Safety Inspector in the manufacturing industry. It can be summarized to develop the system as the following: 1) Obligation to the appointment of the Honorary Industrial Safety Inspector and the Extension to be appointed workplace, 2) Cooperation of the Safety/Health Manager with the Honorary Industrial Safety Inspector, 3) Grant the Honorary Industrial Safety Inspector to make the round of the workplaces for the providing guidance to workers, 4) Employers' fulfillment of the Honorary Industrial Safety Inspector's recommendations, 5) Guarantee the Honorary Industrial Safety Inspector instructions and its hours.

• 한국안전학회지
• /
• 제28권6호
• /
• pp.1-5
• /
• 2013

Notorious press machine bothers employers by causing so many industrial accidents which are mostly of caught-in or between type. In 2008, press machines caused 1665 cases of such type of accidents, which reached about 11% of all those. Even though various approaches has been adopted to prevent those press machine accidents, up to now, no one was found to be satisfactory. In this study, two kinds of companies, accident-occurred and accident-free by press machine, were surveyed to find out positive and negative factors for accidents prevention. 400 companies which experienced accidents in 2008 and 200 companies which did not experience accident at all during the same period were selected for this survey. Most of these companies are small companies that employ less than 50 employees. Even though small companies are exempted from legal obligations to have a safety management system for accident prevention, we surveyed about safety management systems of those companies because of its crucial importance for accident prevention including whether they appointed safety managers and various supervisors. Awareness and efforts for safety of employers and employees were also measured. Results were analysed by the method of cross tabulation analysis. Main findings of this study are as follows. Most accident-occurred companies did not appoint any safety manager or supervisor. While it is recommended that the workplace of high accident rate have a safety manager. In addition, as less employers' effort for safety was made in accident-occurred companies in order to prevent accidents during press processing, the author proposes an amendment to the relevant law. Finally, the most referred reason for the negligence of hazard is the cumbersomeness in installing safeguards.

• 한국산업보건학회지
• /
• 제1권1호
• /
• pp.29-46
• /
• 1991

The study was conducted with 611 Industrial Health officer for 2 years(1998 : 394person, 1989 : 217 person). The purpose of this study was to measure efficiency of the Industrial Health Officer course (use of questionaire) also, in the furure, we would like to make a standard on the management of Industrial Health Officer (software & Hardware) The result are as follows: 1. the response of satisfaction was revealed highly 51 % on the Curriculum. 2. The response of high qualities was revealed highly 92% in the content of textbook. 3. The response of practical program was revaled highly 67.7% in composition of curriculum. 4. The response of high-class instructor was revealed highly on the selection of instructor. 5. the response of a proper term was revealed almost trainees on the education term. 6. When industrial hygienist conducted their Health task, difficulty point, first, the lack of top manager on the health-management in industries, second, take a hold coccurently with another task third, not secure theirs status in industries. 7. almost of Industial Health Officer want to taken highly practical education program, a field of industrial ventilation, measurment of working enviroment. 8. They wanted to taken a practical program that they could conduct handling they-self measuring device, in order to enhance the effect of hygiene education. 9. They responsed size of ideal class that the number of Industrial Health Officer was less than 20 person.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.11-18
• /
• 2000

The study on industrial accidents in Korea has been focused on frequencies of each type, severity, characteristics, causes, and so on. Those attributes of industrial accidents were usually analyzed independently, so that it was hard to provide a systematic guidelines for efficient safety management. Therefore, there were a few of studies based on comprehensive survey results in terms of characteristics of safety management. This study aimed to figure out the characteristics of current safety management and to provide a guideline for ideal safety management in industry. The questionnaire survey carried out for the workers(695) who were in charge of safety management at their industries. The multivariate analyses as well as descriptive statistical analysis were conducted. The factor analysis showed that there were three factors of safety management. They were 1) investment and management for accident prevention, 2) safety manager, and 3) general health and environmental condition. The industries of respondents were clustered into three groups. Three groups showed a statistically significant differences on the number of cases reported and the trends of accident. Actually, the group with the larger investment and better management of accident prevention had a smaller number of accident cases.

• 한국건축시공학회지
• /
• 제20권1호
• /
• pp.73-81
• /
• 2020

최근 4차 산업 시대의 흐름에 따라 건설공사에서는 최첨단 기술의 적용으로 나날이 발전하고 있는데 반해, 건설현장에서는 지속적인 안전사고가 발생하고 있다. 본 연구의 주목적은 안전관리자 계획단계에서 수행되는 업무들의 중요도와 예방효과를 전문가 의견을 통한 IPA 분석을 활용하여 상관관계를 도출하고 안전관리에 기여할 수 있는 주요 안전 계획 업무와 개선이 필요한 업무를 파악함으로써, 궁극적으로 건설안전재해사고 발생을 줄이는 데 있다.

• 한국안전학회지
• /
• 제32권2호
• /
• pp.27-33
• /
• 2017

This study is intended to identify issues on the basis of investigating the actual state of laboratory environment and outlet circuit, and derive end states by expressing sequences from the initiating event of disaster to accident in leakage current, poor contact and overload through ETA(event tree analysis). To this end, this study investigated the actual state of electric equipment of laboratory at universities in all parts of country. And it is shown that most of them are failure in electric work and user negligence in the investigation of actual state. It is found that there is earth fault and defect in wire diameter in the failure of electric work and the problem of partial disconnection due to wire bundling and poor contact in user negligence. Outlet-related component, failure rate and initiating events are composed of a total of 41 initiating events, i.e., 30 internal initiating events and 11 external initiating events. And end states are composed of a total of 15 parts, i.e., 3 electric power parts and 12 safety parts. Earthing class 3 is the most important safety device against leakage current (initiating event). And in case of poor contact, it is necessary for manager to check thoroughly because there is no safety device. In case of overload/overcurrent, when high-capacity equipment is connected, a molded case circuit breaker, safety device, worked. However, in most cases, it is verified that this doesn't work. This study can be utilized as electric equipment safety guide for laboratory safety manager and managers.