• International Journal of Safety
• /
• v.4 no.1
• /
• pp.23-26
• /
• 2005

In spite of the rapid economic growth in Korea, safety cultures in construction industry have not much improved during last ten years. When it is compared to other developed countries of safety, accident rate of Korean construction sites shows bleak figures. This study compares the safety figures of Korea with the UK figures in order to find out what is needed for the safety of the construction sites in Korea. By comparing occupations, age groups, kind of accident, and agent, this study found several differences and similarities, and derived the directions for better safety management.

• International Journal of Safety
• /
• v.2 no.1
• /
• pp.50-56
• /
• 2003

There are a lot of uncertainties in the severe accident phenomena and scenarios in nuclear power plants (NPPs) and one of the major issues for severe accident management is the reduction of these uncertainties. The severe accident management aid system using Probabilistic Safety Assessments (PSA) technology is developed for the management staff in order to reduce the uncertainties. The developed system includes the graphical display for plant and equipment status, previous research results by a knowledge-base technique, and the expected plant behavior using PSA. The plant model used in this paper is oriented to identify plant response and vulnerabilities via analyzing the quantified results, and to set up a framework for an accident management program based on these analysis results. Therefore the developed system may playa central role of information source for decision-making for severe accident management, and will be used as a training tool for severe accident management.

• Journal of the Korean Institute of Educational Facilities
• /
• v.22 no.5
• /
• pp.11-22
• /
• 2015

The purpose of this study is to suggest prevention policy by analyzing accident cases related with school facilities. The results of study are as follows: First, policy enforcement that follows disaster management process such as prevention, preparation, response and recovery is required for school safety policy. Second, in order to proceed with the effective safety policy through collection, analysis, interpretation of data and result monitoring against accident case, the systematic safety infrastructure such as injury surveillance system and the composition of policy consultative group among safety organizations should be established. Third, the school facilities should be installed and managed according to the safety design. Fourth, the systematic education is needed to done for the managers who are concerned with safety regarding the establishment of safety management plan for each school. Fifth, the evaluation and feedback system is required for the results of proceeding with safety policy.

• Journal of the Korean Society of Safety
• /
• v.34 no.1
• /
• pp.45-52
• /
• 2019

Accident analysis models were developed to improve the construction site safety and case studies was conducted. In 2016, 86% of fatality accidents occurred due to simple unsafe acts. Structure related accidents are less frequent than the non structure related causes, but the number of casualties per accident is two times higher than non structure one. In the view of risk perception, efforts should be given to reduce accidents caused by low frequency - high consequence structure related causes. In case of structure related accident, structural safety inspection and management (including quality), ground condition management / inspection technology, and provision of risk information delivery system in case of non structure related accident were proposed as a solution. In analysis of relationship between safety related stakeholder, the main problem were the lack of knowledge of controller and player, loss of control due to duplicated controls, lack of communication system of risk information, and relative position error of controller and player.

• Safety and Health at Work
• /
• v.8 no.3
• /
• pp.290-295
• /
• 2017

Background: Safety climate and occupational stress are related with occupational accident. The present study tried to identify the differences in safety climate and occupational stress according to occupational accidents experience and employment type (e.g., direct workers and subcontract workers). Methods: In this study, we conducted a survey using safety climate scale and Korean Occupational Stress Scale and classified the participants into four groups: direct workers working for accident-free departments, direct workers working for accident departments, subcontract workers working for accident-free departments, and subcontract workers working for accident departments for 2 years within the same workplace in the shipbuilding industry. Results: The direct workers and subcontract workers showed diverse results in subscales of safety climate and occupational stress. This result is supported by existing studies; however, further study is necessary for more supporting evidence and elaborative methodological approach. Conclusion: The necessity of management for safety climate and psychosocial factor such as occupational stress for both direct workers and subcontract workers as a whole is suggested by this study.

• Korean Journal of Agricultural Science
• /
• v.45 no.4
• /
• pp.889-903
• /
• 2018

The purposes of this study were to classify consumer types and to analyze purchase behavior depending on food safety attitudes related to the Fukushima nuclear accident. Based on the consumer survey data, factor analysis and cluster analysis were done to classify consumer types. Applying factor analysis, six factors with a total variance of 73.4% were extracted from 22 basic variables. The 6 factors were termed 'anxiety from ingesting agricultural and fishery products after the nuclear accident', 'importance of food safety when purchasing food', 'reduced rate of purchases of agricultural and fishery products after the accident', 'importance of food prices', 'socio-demographic characteristics' and 'family composition'. Using cluster analysis, consumers were classified into 5 types using the factor scores of 6 factors. The main results are as follows. For every consumer type, the anxiety about imported agricultural and fishery products was higher than that for domestic products after the nuclear accident. The food safety attitudes of consumers were mainly formed by the socio-demographic characteristics. Consumer types with high-education and high-income responded flexibly to the food safety concerning the accident; especially, the consumer type with a high-income and kids under 19 responded very reasonably to the accident. However, consumer types with a low-income and aged over 50 or less than 30 years were the least responsive to the accident, mainly due to financial restrictions. Thus, we suggest some food safety strategies and policy implications based on consumer type for food safety after the accident.

• Journal of the Korean Society of Safety
• /
• v.32 no.5
• /
• pp.96-102
• /
• 2017

The highest fatal accident ratio was recorded in the construction industry. According to the industrial insurance premium rate & business type example, among the construction industry, the architectural work has the highest fatal and loss time accident ratio. Previous literature has investigated various aspects of accident occurrence and prevention in architectural work. However, those studied were limited in that they only focused on the fatal accident without considering the loss time accident. But non fatal accidents were recorded more than 50 times of fatal accidents. Therefore non fatal accidents must be controlled to lessen industrial accidents. Based on this, the goal of this study was to investigate the nature of the loss time accident and derive the risk index of work type in architectural work. In this study, opinions of safety experts were gathered and the risk index of work type was derived using AHP(Analytic Hierarchy Process). And verification was accomplished by comparing the results of this study with the risk index derived by analysis of accident records. Results showed that the risk index of work type was significantly higher in steel frame work, temporary installation work, earth & foundation work, facilities work, concrete work. And statistical analysis for verification showed that coefficient of Pearson correlation was 0.686 and P-value was 0.001.

• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.11-17
• /
• 2013

Forensic Engineering is the area covering the investigation of products, structures that fail to perform or do not function as intended, causing personal injury or damage to property. To investigate the mobile crane's overturn accident in terms of the forensic engineering, in this study, we identified the accident mobile crane's position and posture before accident by the analysis of the trace resulted by the contact between the outrigger and the ground, and the accident remodeling has been performed using CATIA modeling program in the basis of the accident mobile crane's position and posture information. The accident analysis has been performed by comparing this accident remodeling and the crane's specification, the table of the allowance load about the boom's length and the working radius. Through these studies, the safety accident that may occur in mobile crane can be minimized by performing specialized and systematic investigation of the accident cause in terms of the forensic engineering.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.4
• /
• pp.40-49
• /
• 2018

Currently, a lot of researches about high risk test scenarios for autonomous vehicle and advanced driver assistance systems have been carried out to evaluate driving safety. This study proposes new type of test scenario that evaluate the driving safety for autonomous vehicle by reconstructing accident database of national automotive sampling system crashworthiness data system (NASS-CDS). NASS-CDS has a lot of detailed accident data in real fields, but there is no data of accurate velocity in accident moments. So in order to propose scenario generation method from accident database, we try to reconstruct accident moment from accident sketch diagram. At the same step, we propose an accident of occurrence frequency which is based on accident codes and road shapes. The reconstruction paths from accident database are integrated into evaluation of simulation environment. Our proposed methods and processor are applied to MILS (Model In the Loop Simulation) and VILS (Vehicle In the Loop Simulation) test environments. In this paper, a reasonable method of accident reconstruction typology for autonomous vehicle evaluation of feasibility is proposed.

• Journal of the Korea Safety Management & Science
• /
• v.3 no.2
• /
• pp.105-112
• /
• 2001

This study concerns with the accident characteristics and prevention in small manufacturing industries of chemical products. To investigate the accident characteristics, we used workers' compensation reports and employers' accident analysis reports. One hundred and seven injury accidents which results in more than 4 days absence were surveyed from the manufacturing companies with under 100 employees. These data were used to investigate the accident characteristics in terms of company size, injured person's age, work experience, accident time, activity at time of accident, accident type, injury type, injured body Part, and accident agency We propose the accident prevention policy based on the accident characteristics. These results can be used to develop more effective occupational safety management policies in small manufacturing industries of chemical products.