• Journal of the Korean Society of Safety
• /
• v.27 no.6
• /
• pp.31-42
• /
• 2012

Urban transit vehicle that uses electrical energy, is faster, safer and energy-efficient public transit than other means. As a Research method, the Matlab/Simulink are used to modeling a regenerative brake-capable train, and actual parameters such as powering and braking characteristics, all kinds of resistance, passenger load, velocity, gradient, radius of curve etc and powering and breaking commands per time or distance are inputted to train's dynamic equation, then a simulation program is made and used to yield train driving pattern and driving time and the amount of driving energy used thereby at auto and manual operation and at all sector.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1634-1645
• /
• 2004

This study reveals that rail reform which separates infrastructure from train operation requires more safety activities to train operator than before. To meet these requirements the train operator, KNR, should build up more expertness, accept accidents investigation by the third party, establish and operate safety knowledge management system, and manage a forum which facilitates the communication between the parties concerned.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1570-1594
• /
• 2008

Nowadays there are lots of changes in the domestic railroad industries because of the reorganization in the industries, operation of KTX and expansion of city train in local areas. To cope with these changes effectively, domestic & abroad safety guideline and regulation were investigated and reviewed by railroad safety technical development project. Based on this project, domestic rolling stock safety regulation was established in the July and December on 2005. It's been a 3 years after 2005 and to confirm whether there are some problems to applicate the regulation in the field like korail, the necessity of reviewing the regulation gains force. In this study, to improve the field application in rolling stock safety regulation, we investigated the results of integrated railroad audit system and internal safety regulation system in a train operator and also collected the opinions from train manufacturer. Then through the result of investigation and collection of the opinions, we proposed the amendment to the rolling stock safety regulation.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1112-1117
• /
• 2010

The intelligent safety system for level crossing which employs information and communication technology has been developed in USA and Japan, etc. But, in Korea, the relevant research has not been performed. In this paper, we analyze the cause of railway level crossing accidents and the inherent problem of the existing safety equipments. Based on analyzed results, we design the intelligent safety system which prevent collision between a train and a vehicle. This system displays train approaching information in real-time at roadside warning devices, informs approaching train of the detected obstacle in crossing areas, and is interconnected with traffic signal to empty the crossing area before train comes. Especially, we present the video based obstacle detection algorithm and verify its performance with prototype H/W since the abrupt obstacles in crossing areas are the main cause of level crossing accidents. We identify that the presented scheme detects both pedestrian and vehicle with good performance. Currently, we demonstrate developed railway crossing intelligence system at one crossing of Young-dong-seon line of Korail with Sea Train cockpit.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.10
• /
• pp.859-866
• /
• 2001

Recently, fault injection techniques are used for evaluation of the fault coverage properties of safety-critical systems. This paper describes the TCN Fault Injector(TFI) implemented for TCN safety analysis. The implemented TFI injects network level faults to Intelligent MVB Controller that is designed for the Korean High Speed Train. With TFI, it can be verified whether the MVB controller meets TCN specification and its safety requirements.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.982-989
• /
• 2005

Safety of the Train Control System become more important along with the progress of the computer and the technology of communications in these days. Safety of the Train Traffic Control System needs an accurate analysis of the Hazard to reduce losses of a property and lives. Many of advanced railroad nations already had established safety standards when they set the system even considering scrap of railroad and put a great concern on developing safety system which is getting larger and more complicate. Domestic railroad system has to introduce improved technology and systematically prepare and make a scientific survey to achieve unparalleled reliability and safety as well. In this Study, ITCC CTC System will show the research and the analysis of the hazard to ensure the safety of software.

• Journal of the Korean Society for Railway
• /
• v.3 no.3
• /
• pp.147-153
• /
• 2000

The train control and monitoring system (TCMS) is an on board computer system in railway vehicles performing the control, supervisory and diagnostic functions of the complete train system. This system replaces a lot of hard-wired relays and minimizes the necessary vehicle wiring thus increasing the reliability of the train. It is also one of more important equipment on vehicle to implement much higher safety and reliability train system. We studied a software design technique of TCMS using a CASE tool that is a kind of safety critical software engineering tool (SCADE). This tool has mainly four functions such as the graphical editor, the document maker, tile automatically code generator, and the test simulator. The several functions of TCMS are implemented in this software easily programmed using a functional block diagram and a graphic programming language. We applied to automatically generated TCMS modules on the SCADE each functional block for the Standard type EMU in Korea. We performed the combination test using TCMS simulator and the running test in Seoul subway 7 Line. We proved that this technique is more useful for the software design of TCMS in urban transit

• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.412-418
• /
• 2006

In this paper we deal with the APARP theory which has been applied for UK railway system and risk assessment method which has been using in the domestic railway system for the safety demonstration. Both techniques are applied to the ATP wayside equipment for interface. Also, fur the applications of each techniques a analysis of the safety activity and a possibility of the application of ALARP theory are evaluated. Finally, we generate requirements of the safety demonstration for the future domestic railway system by way of the analysis of some assumptions and requirement data which can be applied to the risk assessment of ALARP.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.224-228
• /
• 2017

Recently, in order to improve the efficiency of freight transportation on existing lines, a new freight train model is needed to develop urgently. The weight balance of the cargo for the freight vehicle is very important for the stability of the running train and the safe transportation of the cargo. For achieving the cargo weight balance, we proposed a Cargo Balancing Control(CBC) system on the Freight vehicle equipped in between under frame of car body and bogie system. The Cargo Safety Monitoring(CSM) system was designed to supervise status of the Cargo on freight train. The monitoring system can display real time status data from sensors and various signals effectively. We suggested that this paper is a very useful approach for keeping the safety of running freight trains on existing lines.

• Journal of the Korean Society for Railway
• /
• v.16 no.2
• /
• pp.79-84
• /
• 2013

The definition and classification of shunting, which involves the process of sorting rolling stock into complete train sets inside station yard, are not clearly specified in Korean domestic safety regulations for railway operations. As a result, collisions during shunting occur rather frequently compared with other types of accidents in railway operations. Therefore, new systematic safety principles are proposed in this paper to improve operation safety during shunting. The improvements in safety and efficiency derived from the newly proposed approach are analyzed and verified in field application.