• Tunnel and Underground Space
• /
• v.34 no.2
• /
• pp.104-126
• /
• 2024

Buffer and backfill play an essential role in isolating high-level radioactive waste and retard the migration of leaked radionuclides in deep geological disposal system. A bentonite mixture, which exhibits a swelling property, is considered for buffer and backfill materials, and excessive groundwater inflow from surrounding rock mass may affect stability and efficiency of their role as an engineered barrier. Therefore, stringent quality control as well as in-situ installation management and inflow water constrol for buffer and backfill are required to ensure the safety of deep disposal facilities. In this study, we analyzed the design requirements of buffer and backfill by examining various laboratory tests and a field study of the Steel Tunnel Test at the Äspö Hard Rock Laboratory in Sweden. We introduced how to control the quality of buffer and backfill construction in-field, and also presented how to handle excessive groundwater inflow into disposal caverns, validating the groundwater retention capacity of bentonite pellets and the effectiveness of geotexile use.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.3
• /
• pp.191-208
• /
• 2024

In this study, a hydro-mechanical-damage coupled analysis model was developed to evaluate the structural safety of radioactive waste disposal structures. The Mazars damage model, widely used to model the fracture behavior of brittle materials such as rocks or concrete, was coupled with conventional hydro-mechanical analysis and the developed model was verified via theoretical solutions from literature. To derive the numerical input values for damage-coupled analysis, uniaxial compressive strength and Brazilian tensile strength tests were performed on concrete samples made using the mix ratio of the disposal concrete silo cured under dry and saturated conditions. The input factors derived from the laboratory-scale experiments were applied to a two-dimensional finite element model of the concrete silos at the Wolseong Nuclear Environmental Management Center in Gyeongju and numerical analysis was conducted to analyze the effects of damage consideration, analysis technique, and waste loading conditions. The hydro-mechanical-damage coupled model developed in this study will be applied to the long-term behavior and stability analysis of deep geological repositories for high-level radioactive waste disposal.

• Journal of Radiation Industry
• /
• v.18 no.1
• /
• pp.43-52
• /
• 2024

Currently, there are no interim storage facilities and permanent disposal facilities in Korea, so all spent nuclear fuels are temporarily stored. However, the temporary storage facility is approaching saturation, and as a measure to this, the 2nd Basic Plan for the Management of High-Level Radioactive Waste presented an operation plan for dry interim storage facilities and dry temporary storage facilities on the NPP on-site. The dry storage can be operated in various ways, and to select the optimal dry storage method, the reduction of exposure for workers must be considered. Accordingly, it is necessary to develop a worker exposure scenario according to the dry storage method and evaluate and compare the radiological impact for each method. The purpose of this study is to develop an exposure scenario for workers transporting spent nuclear fuel by dry storage method. To this end, first, the operation procedure of the foreign commercial spent nuclear fuel dry storage system was analyzed based on the Final Safety Analysis Report (FSAR). 1) the concrete overpack-based system, 2) the metal overpack-based system, and 3) the vertical storage module-based system were selected for analysis. Factors were assumed that could affect the type of work (working distance, working hours, number of workers, etc.) during transportation work. Finally, the work type of the processes involved in transporting spent nuclear fuel by dry storage method was set, and an exposure scenario was developed accordingly. The concrete overpack method, the metal overpack method, and the vertical storage module method were classified into a total of 31, 9, and 23 processes, respectively. The work distance, work time, and number of workers for each process were set. The product of working hours and number of workers (Man-hour) was set high in the order of concrete overpack method, vertical storage module method, and metal overpack method, and short-range work (10 cm) was most often applied to the concrete overpack method. The results of this study are expected to be used as basic data for performing radiological comparisons of transport workers by dry storage method of spent nuclear fuel.

• Journal of Radiation Industry
• /
• v.17 no.1
• /
• pp.61-67
• /
• 2023

A Study on the Introduction of Dose Constraints for Occupational Exposures: Focusing on Experts' Opinions by Field of Radiation Industry. The International Commission on Radiological Protection suggests Justification, Optimization, and Dose Limits as the three principles of radiological protection, among which, as a means of protection optimization, ICRP 103 recommends to set dose constraints. In this study, opinions are collected from experts in each category of radiation industries for stakeholder participation to qualify dose constraints. A guidance and questionnaire for analyzing the dose constraints have been developed for their collection, and opinions were collected from radiation protection experts in selected categories. 20 out of 22 experts, consisted with 91%, have assessed the dose constraints setting is necessary, and 2 experts, consisted with 9%, assessed it is unnecessary. The average of dose constraint presented by experts for RI production institutions is to be the highest level of 15.3 mSv, and light-water reactors (14.6 mSv), non-destructive inspection (14.4 mSv), heavy-water reactor and medical institutes (13.9mSv) is to be above the overall average dose constraint. In case of public institutions, the average dose constraint is to be 8.6mSv, and research institutions (8.8mSv), educational institutions (9.6 mSv), waste disposal sites (9.7 mSv), and general industries (10.6 mSv) are resulted to below the overall average dose constraint. As for the means of setting dose constraints, 8 experts out of 22 suggested setting dose constraints for each specific industry or task. And, 5 experts especially suggest setting dose constraints for the specific groups with relatively high exposure, such as workers with above the record levels. As a countermeasure for workers who exceed the dose constraints, 15 experts out of 22 expressed that the cause analyses for them and preparation for a plan of reducing them are necessary.

• Journal of Wetlands Research
• /
• v.26 no.3
• /
• pp.245-253
• /
• 2024

Blue-green algal bloom, or harmful algal bloom has a negative impact on the aquatic ecosystem and purified water supply system due to oxygen depletion in the water body, odor, and secretion of toxic substances in the freshwater ecosystem. This Blue-green algal bloom is expected to increase in intensity and frequency due to the increase in algae's residence time in the water body after the construction of the Nakdong River weir, as well as the increase in surface temperature due to climate change. In this study, in order to respond to the expected increase in green algae phenomenon, an algal bloom forecast system based on hydro-meteorological factors was presented for preemptive response before issuing a algal bloom warning. Through polyserial correlation analysis, the preceding influence periods of temperature and discharge according to the algal bloom forecast level were derived. Using the decision tree classification, a machine learning technique, Classification models for the algal bloom forecast levels based on temperature and discharge of the preceding period were derived. And a algal bloom forecast system based on hydro-meteorological factors was derived based on the results of the decision tree classification models. The proposed algae forecast system based on hydro-meteorological factors can be used as basic research for preemptive response before blue-green algal blooms.

• Korean Journal of Environmental Agriculture
• /
• v.37 no.2
• /
• pp.141-145
• /
• 2018

BACKGROUND: Agricultural soils are vulnerable from contamination of heavy metal derived from industrial waste. Monitoring on heavy metals on agricultural soils around industrial complexes and evaluation on distributional state on the concentrations of heavy metals in soil have been carried out for problem assessment on soil condition. METHODS AND RESULTS: Soil samples of 1,200, were collected from sixty site of industrial complexes located Gyounggi, Chungbuk, Cheonbuk, and Gyoungnam provinces. Total concentration of Cu, Pb, Zn, Ni, and As were analyzed. Heavy metal concentrations in most soil samples were below warning criteria, except 1 site of Pb, Ni, and As, separately. The comparison of mean values of heavy metal concentrations between soils around industrial complexes and paddy soils, showed similar levels of heavy metals, except Pb. The concentrations of lots of heavy metals were distributed between from warning criteria to one fifth level of warning criteria. However, in the case of Cu and Pb, more than 30% were distributed below one twenties level of warning criteria. These results were very similar with the distribution state of heavy metals in upland soils. The concentrations of heavy metals in surface soil and subsoil were similar among the heavy metals in soils around industrial complexes. CONCLUSION: The concentrations of heavy metals in soils around industrial complexes were distributed close to warning criteria. Long term and continous monitoring and evaluation on heavy metals in agricultural soils are required for food safety and sustainable soil management.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.3
• /
• pp.392-404
• /
• 2015

Objectives: This study measured and analyzed the concentrations of crystalline silica, elemental carbon and the contribution ratio of pollutants which influence environmental and respiratory disease around the Ansim Briquette Fuel Complex in Daegu, Korea. Methods: We analyzed the crystalline silica and elemental carbon in the air according to FTIR(Fourier Transform Infrared Spectroscopy) and NIOSH(National Institute of Occupation Safety and Health) method 5040, respectively. In addition, lead stable isotopes, and carbon and nitrogen stable isotopes were analyzed using MC-ICP/MS(Multi Collector-Inductively Coupled Plasma/Mass Spectrometer), and IRMS(Isotope Ratio Mass Spectrometer), respectively. Results: The concentration of crystalline silica in the direct exposure area around the Ansim Briquette Fuel Complex was found to be $0.0014{\pm}0.0005mg/Sm^3$, but not to exceed the exposure standards of the ACGIH(American Conference of Governmental Industrial Hygienists). In the case of the autumn, the direct exposure area was found to show a level 2.5 times higher than the reference area, and on the whole, the direct exposure area was found to have a level 1.4 times higher than the reference area. The concentration of elemental carbon in the direct exposure area and in the reference area were found to be $0.0014{\pm}0.0006mg/Sm^3$, and $0.0006{\pm}0.0003mg/Sm^3$, respectively. This study confirmed the contribution ratio of coal raw materials to residentially deposited dusts in the area within 500 meters from the Ansim Briquette Fuel Complex and the surrounding area with a stable isotope ratio of 24.0%(0.7-62.7%) on average in the case of carbon and nitrogen, and 33.9%(26.6-54.1%) on average in the case of lead stable isotopes. Conclusions: This study was able to confirm correlations with coal raw materials used by the Ansim Briquette Fuel Complex and the surrounding area. The concentration of some pollutants, crystalline silica, and elemental carbon emitted to the direct-influence area around the Ansim Briquette Fuel Complex were relatively higher than in the reference area. Therefore, we need to impose continuous and substantive reduction countermeasures in the future to prevent particulate matter and coal raw materials in the study area. It is time for the local government and authorities to prepare active administrative methods such as the relocation of Ansim Briquette Fuel Complex.

• Korean Journal of Food Science and Technology
• /
• v.43 no.1
• /
• pp.39-44
• /
• 2011

This study was carried out to examine microbiological contamination of ready-to-eat products and to propose a draft-standard and specifications according to food types. RTE foods were classified into 6 groups including fish products, meat products, breads, rices, salads, and fresh cut foods. The prevalence rates of pathogens detected from all samples were compared among food categories. The pH ranges for all RTE samples were between 3.8 and 7.3. Total aerobic cell counts ranged from 2 to 6 log CFU/g. Bread, rice and fresh-cut foods showed significantly higher counts, which ranged above 4.0 log CFU/g among the samples. Two kinds of rice were above the level of the KFDA Food Code standard for Eschrichia coli. The prevalence rate of E. coli in the rice was 6.7%. For Staphylococcus aureus, one fish product and one bread-product had levels above 2 log CFU/g. Bacillus cereus counts for all samples were below the level of 3 log CFU/g. Listeria monocytogenes was not detected in the samples. Therefore, these data suggest that the primary microbial hazard factors for ready-to-eat foods and risk assessments should focus on E. coli, S. aureus, and B. cereus.

• Clinical and Experimental Pediatrics
• /
• v.49 no.12
• /
• pp.1315-1323
• /
• 2006

Purpose : This study was conducted to compare the efficacy and safety of ibuprofen and indomethacin in the treatment of patent ductus arteriosus (PDA) in preterm infants and to determine whether ibuprofen can be an alternative drug. Methods : A total of 32 preterm infants with symptomatic PDA were enrolled in the study. Twelve infants received intravenous ibuprofen 10 mg/kg, followed by 5 mg/kg after 24 and 48 hours. As a comparative group, twenty premature infants received three doses of indomethacin 0.1-0.2 mg/kg every 12 hours. Results : PDA was closed in 11 of 12 infants of the ibuprofen group (92 percent) and in 18 of 20 infants of the indomethacin group (90 percent). Serum sodium concentration decreased along with time significantly (P<0.0001) and to its lowest level at 48 hours after administration of the third dose (P=0.0011) in both groups, but showed no significant difference between two groups. Serum BUN and creatinine concentrations were not changed significantly before or after treatment in each group and showed no difference between thetwo groups. The amount of urine output did not change along with time significantly in both groups (P=0.0725), and showed no significant difference between two groups. Conclusion : Ibuprofen has similar effects to indomethacin in the rate of PDA closure and complication when compared. It has similar changes in serum sodium level and complications when compared to indomethacin for the treatment of PDA in preterm infants. Therefore, intravenous ibuprofen may be used as an alternative agent in the treatment of symptomatic PDA in preterm infants.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.432-438
• /
• 1996

This study was carried out to prepare information for the establishment of countermeasures for an area contaminated with minewaste from an old zinc mine at Kahak-long in Kwangmyong. Minewaste and bottom sediments from the streams in this area were sampled and were analyzed for Cd, Cu, Pb, and Zn extracted with different solution. Total heavy metal contents in both minewaste and bottom sediments were fairly high. Cadmium and Zn contents in the minewaste and Cd, Cu, Pb, and Zn contents in the bottom sediments extracted with 0.1 N HCl showed a much higher level than those in the background level of paddy soils and in the soils around the other metal mines regardless of the distance from the mine. Sulfide/residue forms of Cd, Cu, Pb, and Zn covered the highest portions for the minewaste. For bottom sediments, sulfide/residue forms of Cu and Zn formed the highest portions, whereas the contents of both carbonate and sulfide/residue forms of Cd and Pb were significant. The lower the pH of the extracting solutions, the more heavy metals extracted from both minewaste and bottom sediments.