• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.12
• /
• pp.6079-6097
• /
• 2018

Safety-related systems (SRSs) has widely used in shipbuilding and power generation to prevent fatal accidents and to protect life and property. Thus, SRS performance is a high priority. The safety integrity level (SIL) is the relative performance level of an SRS with regard to its ability to operate reliably in a safe manner. In this article, we proposed an optimal design procedure to achieve the targeted SIL of SRSs. In addition, a more efficient failure mode and effects diagnostic analysis (FMEDA) process and optimization model were developed to improve cost efficiency. Based on previous IEC 61508 diagnostic analyses that revealed unnecessary costs associated with excessive reliability, the new approach consists of two phases: (i) SIL evaluation by FMEDA, and (ii) solution optimization for achieving the target SIL with minimal cost using integer-programming models. The proposed procedure meets the required safety level and minimizes system costs. A case study involving a gas-detection SRS was conducted to demonstrate the effectiveness of the new procedure.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.11-19
• /
• 2012

Especially because of the distinctiveness that new experiments and research provoke coexistence of various risk factors, the researchers in university laboratory are being exposed to incidents that are difficult to predict. Due to the fact that the numbers of accidents that occur at the university laboratory are increasing, the necessity for laboratory safety management is on the rise. Most laboratory accidents are caused by the ability that can detect risk factors such as unsafe behavior or unsafe condition but is not working perfectly. In order to prevent researchers in advance from unsafe behavior or unsafe condition, effective safety education, systematic safety management, safe research environment, continuous safety check and proper measures after accident are the most important factors. In this study, survey was conducted in university laboratory to identify the factors that affect on safety management and to measure the safety management level. As a result, effective measures are proposed for the improvement of the safety management level.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.1
• /
• pp.43-47
• /
• 2017

A SIL(Safety Integrity Level) assignment method is used for preventing failure action. The goal of safety system for processing automation is to reduce the human fatal risk. Even if we have developed the processing automation according to developing technology, we are also realized on increasing the human fatal risk cause of unexpected accidents. This study is directed the solution of decision for safety level for safety system and the best architecture for safety system in process automation.

• Journal of the Korean Society of Safety
• /
• v.24 no.2
• /
• pp.62-68
• /
• 2009

Life Cycle Cost(LCC) is adopted to decide the target of safety level in designing suspension bridges. The LCC are evaluated considering two types of uncertainty; aleatory and epistemic. The nine alternative designs of suspension bridge are simulated to decide the safety level which can minimize the LCC. The LCC is calculated through the probability of failure and safety index including the uncertainty. This method results in the useful tool deciding the optimum safety level with minimal LCC as the main design factor.

• Journal of the Korean Society of Safety
• /
• v.33 no.1
• /
• pp.118-127
• /
• 2018

The study aims present data collection on the current state of safety and safety consciousness in universities' laboratories to verify the relation between investigation factors and further draw implications. The first finding is that laboratories with high risk level do not have better safety management performance than those with lower risk level. Secondly, labs that experienced accidents has a higher level of control than those without any. Regarding to the university's acceptance of safety requirements, the group with a high level of risk awareness or accidents were concerned that their universities did not provide sufficient support in safety management. It means that safety is low on the list of priorities in Universities' overall agenda and individual labs are responsible of their own safety. Most of the causes of accidents in the labs are man-made than physical errors. It requires that continuous safety educations and measures through safe research activities are means to eliminate and reduce the individual's safety frigidity. Through the survey, it is known that current education's system and contents are too generalized to reflect the characteristics of each laboratory. Thus, it is difficult to recognize various risk situations and to actually prevent safety accidents. Therefore, it is necessary to shift to customized curriculum and system for various major fields.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.1
• /
• pp.249-254
• /
• 2017

This paper presents an assessment system of safety level of 22.9kV grade high voltage electrical facilities considering environmental factors. The assessment system was developed based on the following procedure. Firstly, assessment structure was determined by consulting standards regarding inspection and diagnosis of electrical facilities. Secondly, contents of items and sub items of assessment system were developed. Thirdly, in order to quantify the importance of the assessment system, the weight was calculated using Analytic Hierarchy Process(AHP). Lastly, assessment table of safety level was developed including environmental factors such as period of use and load factor. The developed system can evaluate the safety level of high voltage facilities in an objective way. Therefore it can be applicable to electrical safety management system based on Internet of Things(IoT).

• Journal of the Korean Institute of Gas
• /
• v.15 no.5
• /
• pp.57-62
• /
• 2011

Modern chemical plants including petroleum refinery and gas industries have evolved into more complex and specialized. In these industrial complexes, it is important to maintain acceptable safety level protecting from various potential disasters caused by fire, explosion and the leakage of toxic materials. Recently possibility and consequence of accidents are increasing in the industrial process. So there is a trade-off between the plant operation efficiency and safety level. In this study SIF(Safety instrument Functions) was incorporated into SIL(Safety Integrity Levels). As a result, the safety level was upgraded by designing resonable allocation of safety instruments.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.29-34
• /
• 2013

Safety requirements for aircraft and system functions include minimum performance constraints for both availability and integrity of the function. These safety requirements should be determined by conducting a safety assessment. The depths and contents of aircraft system safety assessment vary depending on factors such as the complexity of the system, how critical the system is to flight safety, what volume of experience is available on the type of system and the novelty and complexity of the technologies being used. Requirements that are defined to prevent failure conditions or to provide safety related functions should be uniquely identified and traceable through the levels of development. This will ensure visibility of the safety requirements at the software and electronic hardware design level. This paper has prepared to study on promoting the efficiency of establishing hierarchical safety requirements from aircraft level function to item level through system safety processes.

• Journal of Korean Academy of Nursing Administration
• /
• v.17 no.4
• /
• pp.462-473
• /
• 2011

Purpose: This study was done to identify the factors affecting the perception of patient-safety-culture and the level of safety-care-activity among nurses in small-medium sized general hospitals. Method: Data were collected during April and May 2011, from 241 nurses of five hospitals. A hospital survey questionnaire on patient-safety-culture and safety-care-activity was used. Collected data were analyzed using descriptive statistics, Pearson correlation, t-test, ANOVA, Scheffe test and multiple-regression. Results: There were significant differences in the level of perception of patient-safety-culture according to the nurses' age, type of hospital, position, work department, and knowing whether there was a Patient-Safety committee in their hospitals. Nurses with higher perceived level of the patient-safety-culture performed more safety-care-activities. Factors influencing on the safety-care-activities were general patient safety, having had safety-education, patient-to-nurse ratio, employment status, and the level of reporting medical errors. These factors explained 22.9% of the safety-care-activity. Conclusions: The study findings suggest that in order to improve the nurses' perceived level of patient-safety-culture and safety-care-activity, the hospitals need to establish patient-safety committees and communication systems, and openness to reporting medical errors are needed. Better work conditions to ensure appropriate work time, regulate patient-to-nurse ratio, and nursing education standards and criteria, are also required.

• Korean Journal of Occupational Health Nursing
• /
• v.22 no.1
• /
• pp.24-34
• /
• 2013

Purpose: We investigated the relationship between patient safety culture and safety care activity, and identified factors for safety care activity of entry-level nurses. Methods: The subjects of the study were 204 entry-level nurses working at five general and advanced hospitals with over 500 beds located in C and D City. The data were analyzed using descriptive analysis, t-test, ANOVA, Pearson's correlation and hierarchical multiple regression with SPSS/WIN 18.0 program. Results: Perception of patient safety culture had significant correlations with safety care activity. Multiple regression analysis showed that demographic variables of quality of nursing on patient safety and health state of entry-level nurses affected safety care activity. In addition, patient safety culture in ward and communication affected safety care activity. These factors explained 38% of variance. Conclusion: Based on the results of the study, patient safety culture promotion strategies to facilitate supportive work environment and effective communication are needed.