• 한국안전학회지
• /
• 제24권3호
• /
• pp.88-95
• /
• 2009

Most of subway stations are located underground and the number of passengers is far more than that of designed value, therefore the risk of accident is growing bigger and serious damage is expected in case of disaster. In Korea the period of evacuation study is short and numerical and experimental data of evacuation phenomena in subway station is rare. Many egress evaluation depend on foreign commercial S/Ws which are not yet proven its availability in special case such as subway station. In this paper outflow coefficients which are essential in egress evaluation are calculated at train door, stairway and turnstile at 3 most crowed subway stations. This numerical data can be used in prediction of egress evaluation and the result of other prediction methods can be verified with these experimental data.

• 대한산업공학회지
• /
• 제41권5호
• /
• pp.511-520
• /
• 2015

Inventory, cost, and the level of service are three interrelated key metrics that most supply chain organizations are striving to optimize. One way to achieve this goal is to create a simulation model to conduct sensitivity analysis and optimization on several different supply chain policies that can be implemented in actual operation. In this paper, a case of Xerox global supply chain modeling and analysis to assess several "what if" scenarios for the consumable policy safety stock is presented. The simulation model, combined with analytical cost model and optimization module, is used to optimize the policy safety stock level to achieve the lowest total value chain cost. It was shown quantitatively that the policy safety stock can be reduced, but it is offset by the inbound premium transportation cost to expedite supplies in shortage, and the outbound premium transportation cost to send supplies to customers via express shipment, requiring fine balance.

• 한국안전학회지
• /
• 제19권1호
• /
• pp.77-80
• /
• 2004

The purpose of this study was to examine effects of combustion retardation for paper filter impregnated metal salts by measurement of extinguishing concentration, CO concentration, and limiting oxygen index(LOI, ASTM D 2863). And thermal stability analysis using DSC was carried out. In case of extinguishing concentration, $NH_4H_2PO_4$ showed excellent effect of combustion retardation. The result of LOI measurement showed that metal salts possessed good effect of combustion retardation. And thermal analysis using DSC showed that these metal salts possessed thermal stability. In case of CO concentration, CO concentration was increasing because of imperfect combustion process due to combustion retardation effect of metal salts.

• 대한인간공학회지
• /
• 제32권3호
• /
• pp.279-291
• /
• 2013

Objective: The aim of this study was to compare old standard EN 954-1 and new standard EN ISO 13849-1 through case study and provide necessity of adaptation of EN ISO 13849-1 in Korea. Background: International and EU harmonized standard EN ISO 13849 "safety of machinery - Safety-related parts of control system" is classified into Part 1: General principles for design and Part 2: Validation. EN ISO 13849-1 standard was introduced in Official Journal of the European Union on September 8, 2009 as harmonized standard, and old standard EN 954-1 was withdrawn on December 31, 2011. So, EU decided to use of EN ISO 13849-1 standard forcibly from January 1, 2012 for safety of machinery. New machines need to be CE marked if they are to be placed on the market in the European Economic Area(EEA), Switzerland or Turkey, and Korean machine builder should apply EN ISO 3849-1 standard for safety of machinery accordingly. However, current Korean Safety Certification system(KCs mark) for dangerous machinery is not referred to EN ISO 13849-1 standard as safety standard. There is a need of research for adaptation of EN ISO 13849-1 standard in Korea as safety standards for new design of safety-related control system which use mostly electronic components. Method: Five case studies of representative designs for safety-related control system in accordance with EN 954-1were selected according to safety category from B to 4. And these five representative designs were tried to change new design in accordance with EN ISO 13849-1 standard. The results of comparison were analyzed in aspect of economy and technical complexity. Results: The results showed that EN ISO 13849-1 provided quantitative method of application and it enabled designers to create safety-related control systems that require fewer components and less wiring, with many of the components being to a lower specification and, therefore, less costly. Conclusion: EN ISO 13849-1 standard is good for electronic safety-related control systems compare to EN 954-1. By considering the importance of application of EN ISO 13849-1 and benefits, the application of EN ISO 13849-1 as safety standard for safety of machinery is urgent in Korea. Application: The results of comparing EN 954-1 and EN ISO 13849-1 standard might help to determine the adaptation of EN ISO 13849-1 standard for safety of industrial machinery in Korea.

• 건설안전기술
• /
• 통권43호
• /
• pp.84-90
• /
• 2007

• 한국산업융합학회 논문집
• /
• 제26권3호
• /
• pp.389-393
• /
• 2023

In this study, We analyzed that evacuation characteristics of residents, fire safety standards, evacuation facilities and flame retardation, etc to increase the evacuation safety of a long-term care hospital. Therefore, In order to improve of evacuation safety in case of fire, We proposed that an increase in the number of care workers, education, training and an amendment to the law, a change of positions of fire safety controller.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1780-1785
• /
• 2016

This paper presents few case studies of state diagnosis of XLPE cables using very low frequency techniques. The power cables of 22.9kV which have installation fault were assessed using VLF technique in addition to other techniques like insulation resistance and DC voltage withstand test. From the experimental results, The dielectric loss($tan{\delta}$) values of degradation of the cable(joint, knife, needle) at $U_0$ were 5.839, 5.526 and 6.251, respectively and all values were "further study advised". VLF PD measurement was also found defective portion. These method was effective in defect to fault in the degradation of the cable. However, the breakdown did not occur in the degradation of the cable because of properties of XLPE insulation. Few case studies of using VLF $tan{\delta}$ diagnosis for fault are measured and analyzed. The $tan{\delta}$ values at $U_0$ were "further study advised" or "action required".

• International Journal of Safety
• /
• 제4권2호
• /
• pp.18-23
• /
• 2005

There are many electrical connections in the electric apparatus and most fires due to a fault contact result from a failure or misuse of electric apparatus and installation. The fault contact happens between electrical connections by the loose and the mechanical vibration. In this paper, we have investigated thermal and electrical properties of screwed electric contacts due to the mechanical vibration. The exciter was connected to a signal generator and power amplifier that provided the vibration frequency and amplitude. The vibration, temperature and voltage data were sent to a data acquisition system (DAQ). In the case that fault contact took place, the arc happened between the screwed electric contact and electric wire, heat due to the arc was transmitted to the adjacent insulators, for which the oxide could be generated more. In addition, a spark was generated and the insulator began to melt. Thus, the possibility of electrical fire became the highest in this case. Finally, when the fault contact takes place due to vibration, the hazard of an electric accident is very high.

• 한국안전학회지
• /
• 제34권6호
• /
• pp.88-95
• /
• 2019

It has been only a few years since drones have been introduced to Korea, and as the use of drones has increased in industrial sites as well as in hobby activities, accidents such as workers' body parts coming into contact with rotating propellers have been occurring since 2016. Industrial accident cases are being filed. In the case of a remote control vehicle, if you release the remote controller in the event of an abnormal situation, it stops in place and no further danger occurs but in case of drones flying over the sky is different. Sudden motor stops during flight, uncontrolled changes in flight posture, loss of radio waves, loose propeller, etc, numerous factors can lead to accidents due to unintentional movements. Therefore, drone operators need safety knowledge as well as high knowledge about drones. However, drones with a weight of less than 12 kg can fly without a pilot's certification, and therefore, a minimum accident prevention measure is required. 10 accidents approved as industrial accidents since 2016, 23 accidents surveyed by general drone operator, 40 accidents surveyed by the Korean Consumer Resources Unfortunately for the purpose of writing this paper, drones are a new species and do not have many parameters for analysis but my experience has shown that the type of disaster does not deviate significantly. In addition, there is no paper that analyzes drone related industrial accidents not only in Korea but also in other countries. However, even if you watch an overseas drone accident video through YouTube, it is not much different from the case that occurs in Korea. I hope that this study will be of little help to all the drone pilots as well as the work safety of industrial drones used in industrial sites.

• 한국학교보건학회지
• /
• 제19권2호
• /
• pp.105-115
• /
• 2006

Purpose：This thesis was performed to evaluate the effect of the experience safety education on the safety behavior and standard of habit to the middle school students of one islands. Methods：The participants of this study included 43, located in the adjoining region in S county. While one of the class, composed of 19 students was designated as an experimental group, and the other class, composed of 24 students, was compared as a control group. Used program in this study was safety education program, 'Safe School, Safe Life' which was developed by Korea Occupational Safety & Health Agency. This program has emphasis on the virtual case rather than lecture style education. Results：The findings in this research were as follows. Indoor safety behavior was significant difference between the two groups. On the other hand, the effect on outdoor safety behavior was not difference. In playground case, active strength was needed without continuous attention. The effect of the experience safety behavior education was not shown in the area of traffic rules, pedestrian safety, and vehicle safety. But home safety behavior was effective. Education program on the manners of standard life habit gives positive results. But in the area of rules, this program was not effective, since students had tendency to emphasize the rigid scale rather than manners. Conclusion：These findings in the study give us the necessity of experience safety education program to prepare various situations of everyday life and to reinforce safety behavior and improve standard life habit.