Browse > Article

The Fire Hazard of Screwed Electric Contacts Due to Mechanical Vibration at Low Voltage Equipment  

Choi, Chung-Seog (Electrical Safety Research Institute, subsidiary of Korea Electrical Safety Corporation)
Kim, Young-Seok (Electrical Safety Research Institute, subsidiary of Korea Electrical Safety Corporation)
Kim, Hyang-Kon (Electrical Safety Research Institute, subsidiary of Korea Electrical Safety Corporation)
Publication Information
International Journal of Safety / v.4, no.2, 2005 , pp. 18-23 More about this Journal
Abstract
There are many electrical connections in the electric apparatus and most fires due to a fault contact result from a failure or misuse of electric apparatus and installation. The fault contact happens between electrical connections by the loose and the mechanical vibration. In this paper, we have investigated thermal and electrical properties of screwed electric contacts due to the mechanical vibration. The exciter was connected to a signal generator and power amplifier that provided the vibration frequency and amplitude. The vibration, temperature and voltage data were sent to a data acquisition system (DAQ). In the case that fault contact took place, the arc happened between the screwed electric contact and electric wire, heat due to the arc was transmitted to the adjacent insulators, for which the oxide could be generated more. In addition, a spark was generated and the insulator began to melt. Thus, the possibility of electrical fire became the highest in this case. Finally, when the fault contact takes place due to vibration, the hazard of an electric accident is very high.
Keywords
screwed electric contact; fault contact; mechanical vibration; electrical fire;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Roland S. Timist, 'A Possible Degeneration Mecha­nism in Stationary Electrical Contacts', IEEE Trans­actions on Component, Hybrids, and manufactureing Technology, Vol.13, No.1, 65-68, 1990   DOI   ScienceOn
2 V. Babrauskas, 'Fires due to Electric Arcing: Can 'Cause' Beads be Distinguished from 'Victim' Beads by Physical or Chemical Testing', Fire and Materials, pp.189-201, 2003
3 Jarle Sletbak, Roar Kristensen, Hakon Sundklakk, Gun­nar Navik, and Magne Runde, 'Glowing Contact Areas in Loose Copper Wire Connections', IEEE Transac­tions on Component, Hybrids, and manufactureing Technology, Vol.15, No.3, pp.322-327, 1992   DOI   ScienceOn
4 Korea Electrical safety Corporation, 'A Statistical Analysis on the Electrical Accident', 13th edition, pp. 7-24, 2004
5 Michael D. Bryant, 'Time-Wise Increases in Contact Resistance Due to Surface Roughness and Corrosion', IEEE Transactions on Component, Hybrids, and man­ufacturing Technology, Vol.14, No.1, pp. 79-89, 1991   DOI   ScienceOn
6 Hyang-Kon Kim, Kilmok Shong, Dong-Ook Kim, Dong-Woo Kim, Young-Seok Kim and Chung-Seog Choi, 'Electrical Properties of PVC Insulated Plug by Poor Contact', Proceedings of the 6th AOSFST, Vol.3, pp.723-727, 2004
7 N.Ben Jemaa, L. Morin, D.jeannot, F.Hauner, 'Erosion And Contact Resistance Performance of Materials for Sliding Contacts Under Arcing', Electrical Contacts, 2000. Proceedings of the Forty-Sixth IEEE Holm Con­ference on 25-27 Sept. pp.73-78, 2000   DOI
8 Nouredine ben Jemaa, et al. 'Erosion and Contact Resistance Performance of Materials for Slidering Contacts Arcing', IEEE Trans., Comp., Packag., Man­ufac. Technol., Vol 24, No.3, pp.353-357, 2001   DOI   ScienceOn
9 E. Cadirli, N. Marasli, B. Bayender and M. Gunduz, 'Investigation of the structure parameters according to the solidification parameters for pivalic acid', Material science, Vol.34, pp.5533-5541, 1999   DOI   ScienceOn
10 Farahat, M.A.et al, 'Effect of coating materials on the electrical performance of copper joints',Electrical Con­tacts, Proceedings of the Forty-Second IEEE Holm Conference on Joint with the 18th International Con­ference on Electrical Contacts, pp.472-478, 996   DOI
11 M. Runde, G.E. Ottesen, B. Skyberg, M.Ohlen, 'Vibra­tion Analysis for Diagnostic Testing of Circuit-Break­ers', IEEE Transactions on Power Delivery, Vol. 11, No. 4, pp.1816-1823, 1996   DOI   ScienceOn
12 Chung-Seog Choi, Hyang-Kon Kim, Dong-Ook Kim, Young-Seok Kim, 'The Properties of Waveform and Plug Formed by Poor Contact of Power Cords Sets', Journal of the KOSOS, Vol. 20, No. 1, 2005