• 한국항공운항학회지
• /
• 제21권2호
• /
• pp.21-25
• /
• 2013

The system and components for aircraft are required the design data on which the safety requirements are properly reflected for their certification. This paper presents the procedure and results of a safety assessments analysis for the rotorcraft fuel pumps in oder to confirm and verify them. The fuel pumps design assessment must be performed, including a detailed failure analysis to identify all failures that will prevent continued safe flight or safe landing. In order to assess the fuel pumps design safety, not only system safety hazard analysis and but FTA(Fault Tree Analysis) for proofing the safety objective of the fuel pumps are performed. The results of the safety assessment for fuel pumps validate that no single failure or malfunction could result in catastrophic failure or critical accidents of the rotorcraft.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2013년 춘계학술대회
• /
• pp.445-456
• /
• 2013

According to Department of labor guideline "2012-104 (2012.9.26.)" This study is to suggest the basic information and the improvement for the application of risk assessment on a construction site by group interview & survey of construction worker who is the practice of the subject and then numerical analysis about awareness and action plan of Safety and health. The result of group interview and survey of construction worker, most of construction worker feel the danger during the work. Then construction worker analysis results that risk assessment helps to change & raise awareness of safety and reduce an industrial disaster. Easy Safety management activity such as TBM & safety education active will be necessary for safe worksite and then I suggest the TBT(tool box talk) active which combines TBM & safety education.

• 한국안전학회지
• /
• 제30권4호
• /
• pp.174-180
• /
• 2015

This study developed a Safety Culture Impact Assessment Model (SCIAM) which consists of a safety culture assessment methodology and a safety culture impact quantification methodology. The SCIAM uses safety culture impact index (SCII) to monitor the status of safety culture of the NPPs periodically and it uses relative core damage frequency (RCDF) to present the impact of safety culture on the safety of the NPPs. As a result of applying SCIAM to the reference plant (Kori 3), the standard for the healthy safety culture of the reference plant is suggested. SCIAM might contribute to improve the safety of the NPPs (Nuclear Power Plants) by monitoring the status of safety culture periodically and presenting the standard of healthy safety culture.

• 한국안전학회지
• /
• 제29권3호
• /
• pp.121-128
• /
• 2014

Risk assessment system which is the point of occupational safety and health management system is recognized to be effective to prevent industrial accident and occupational disease internationally. Ministry of Employment and Labor developed guidance on risk assessment at workplace recently. This guidance presents standard model on risk assessment at workplace. However, enterprises may be confronted with many questions in the process of introducing and operating risk assessment. For risk assessment to be implemented properly and effectively at workplace, there are various questions that need to be considered in advance, including giving shape to standard on risk evaluation and clarifying the implementation system at workplace in advance. Also for risk assessment to be revitalized at workplace, several policy matters need to be settled. First, an administrative agency should present the implementation method of risk assessment more concretely. Secondly, it is necessary for an administrative agency to develop and spread various detailed manual, models and good practices related to risk assessment. Thirdly, a government agency need to apply an incentive & disadvantage policy actively to risk assessment.

• 한국환경보건학회지
• /
• 제44권2호
• /
• pp.124-132
• /
• 2018

Objectives: All enterprises intending to install and operate hazardous chemical handling facilities should prepare an off-site risk assessment (ORA) report that evaluates the impact of potential chemical accidents on the surrounding environment and population. This study was conducted to introduce the process of development and the functioning of the Korea Off-site Risk Assessment support tool (KORA) developed by the National Institute of Chemical Safety and to suggest manners to increase its utilization. Additionally, this article provided an overview of KORA. Methods: In order to identify problems with and refinements for KORA, the required items for each phase of KORA were derived by analyzing the Chemical Control Act and related administrative regulations. Results: The functions of KORA made receptor-considered assessment of chemical accidents possible, but several limitations were found in particular phases, such as the analysis of impact range, consideration of sensitive receptors, and assessment of environmental receptors. Conclusion: In this study, we suggested manners to increase the utilization of KORA. It is anticipated that the further research suggested in the study could contribute to the stabilization of the KORA system.

• 한국지진공학회논문집
• /
• 제23권2호
• /
• pp.101-108
• /
• 2019

The seismic safety of nuclear power plants has always been emphasized by the effects of accidents. In general, the seismic safety evaluation of nuclear power plants carries out a seismic probabilistic safety assessment. The current probabilistic safety assessment assumes that damage to the structure, system, and components (SSCs) occurs independently to each other or perfect dependently to each other. In case of earthquake events, the failure event occurs with the correlation due to the correlation between the seismic response of the SSCs and the seismic performance of the SSCs. In this study, the EEMS (External Event Mensuration System) code is developed which can perform the seismic probabilistic safety assessment considering correlation. The developed code is verified by comparing with the multiplier n, which is for calculating the joint probability of failure, which is proposed by Mankamo. It is analyzed the changes in seismic fragility curves and seismic risks with correlation. As a result, it was confirmed that the seismic fragility curves and seismic risk change according to the failure correlation coefficient. This means that it is important to select an appropriate failure correlation coefficient in order to perform a seismic probabilistic safety assessment. And also, it was confirmed that carrying out the seismic probabilistic safety assessment in consideration of the seismic correlation provides more realistic results, rather than providing conservative or non-conservative results comparing with that damage to the SSCs occurs independently.

• 한국안전학회지
• /
• 제37권5호
• /
• pp.33-41
• /
• 2022

As the number of automobile registrations increases yearly, parking spaces that are located in downtown areas are increasing, and mechanical parking facilities are also increasing. Therefore, there is a high risk of accidents when installing and repairing a mechanical parking facility. In the preceding six years (from 2012 to 2018), the statistics that pertain to accidental disasters indicated that a total of 137 disaster victims were generated by the construction sector, 33 accidents occurred, and 10 people died. However, only the safety management items pertaining to accidents that occur during maintenance work and the use of the installed mechanical parking facilities are being studied; furthermore, there is no ongoing research with respect to the risk management that is conducted at the construction site. In 2017, the Korea Occupational Safety and Health Agency (KOSHA) announced the "Guidelines for Safe Installation and Maintenance of Mechanical Parking Equipment"; however, it is a safety guideline that is limited to the installation of basic protective equipment and to facility installation. There is no model for mechanical parking facilities that is indicated in the "Risk Assessment Model by Construction Industry Type", which is issued by the Safety and Health Corporation and is widely utilized for risk assessment in the construction industry; moreover, elevator installation work CODE N0: 22 is the only major example of a disaster. In this study, "risk assessment through a focus group interview" was performed, and data was derived from the "risk assessment of Article 41 (2) of the Industrial Safety and Health Act", which reflects the characteristics of the construction industry based on AHP analysis. The results of this study can be utilized for the risk assessment that is conducted during the construction stage of mechanical parking facilities.

• 한국식품위생안전성학회:학술대회논문집
• /
• 한국식품위생안전성학회 2005년도 추계 국제심포지움 및 정기학술발표회
• /
• pp.21-70
• /
• 2005

• Corrosion Science and Technology
• /
• 제18권1호
• /
• pp.1-7
• /
• 2019

To find proper lathe machining parameters for SA182 Grade 304 stainless steel (SS), six kinds of samples with different machining surface states were prepared using a lathe. Surface morphologies and microstructures of near surface deformed layers on different samples were analysed. Surface morphologies and chemical composition of oxide films formed on different samples in simulated primary water with $100{\mu}g/L\;O_2$ at $310^{\circ}C$ were characterized. Results showed that surface roughness was mainly affected by lathe feed. Surface machining caused grain refinement at the top layer. A severely deformed layer with different thicknesses formed on all samples. In addition to high defect density caused by surface deformation, phase transformation, residual stress, and strain also affected the oxidation behaviour of SA182 Grade 304 SS in the test solution. Machining parameters used for # 4 (feed, 0.15 mm/r; back engagement, 2 mm; cutting speed, 114.86 m/min) and # 6 (feed,0.20 mm/r; back engagement, 1 mm; cutting speed, 73.01 m/min) samples were found to be proper for lathe machining of SA182 Grade 304 SS.

• 한국의료질향상학회지
• /
• 제22권2호
• /
• pp.43-73
• /
• 2016

Purpose: The aims of this study were to assess the presence of core patient safety practices in Korean hospitals and assess the differences in reporting and learning systems of patient safety, infrastructure, and safe practices by hospital characteristics. Methods: The authors developed a questionnaire including 39 items of patient safety staffing, health information system, reporting system, and event-specific prevention practices. The survey was conducted online or e-mail with 407 tertiary, general and specialty hospitals. Results: About 90% of hospitals answered the self-reporting system of patient safety related events is established. More than 90% of hospitals applied incidence monitoring or root cause analysis on healthcare-associated infection, in-facility pressure ulcers and falls, but only 60% did on surgery/procedure related events. More than 50% of the hospitals did not adopted present on admission (POA) indicators. One hundred (80.0%) hospitals had a department of patient safety and/or quality and only 52.8% of hospitals had a patient safety officer (PSO). While 82.4% of hospitals used electronic medical records (EMRs), only 53% of these hospitals adopted clinical decision support function. Infrastructure for patient safety except EMRs was well established in training, high-level and large hospitals. Most hospitals implemented prevention practices of adverse drug events, in-facility pressure ulcers and falls (94.4-100.0%). But prevention practices of surgery/procedure related events had relatively low adoption rate (59.2-92.8%). Majority of prevention practices for patient safety events were also implemented with a relatively modest increase in resources allocated. Conclusion: The hospital-based reporting and learning system, EMRs, and core evidence-based prevention practices were implemented well in high-level and large hospitals. But POA indicator and PSO were not adopted in more than half of surveyed hospitals and implementation of prevention practices for specific event had low. To support and monitor progress in hospital's patient safety effort, national-level safety practices set is needed.