• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.23-30
• /
• 2012

The purpose of this paper is to analyze various categories such as the recognition, expectation and acceptability of CCTV use in educational facilities by doing a survey on how college students think about the CCTV installed in educational facilities. For this research, diverse existing surveys regarding CCTV were examined, and the appropriate elements of survey questions were extracted and developed. Based on this method, we intend to complete a survey study hereafter on the change in perception regarding CCTV inspection. We made four hypotheses before the survey and the results of the survey are as follows: First, the expectations for CCTV's ability to reduce crime were high. Second, the fears about being a victim of theft or violence crime were decreased. Third, there were a number of respondents who would weigh more on increased safety by installing a CCTV rather than be concerned that CCTV may lead to the violation of students' human rights. Fourth, there showed a difference in recognizing CCTV among three groups. Also, for the questions regarding the places where CCTV is installed, there were many negative opinions on its installation in the student convenient facilities. What we have achieved was not a simple survey which investigates the pros and cons about CCTV use, but a newly suggested way of survey, which enables us to test various hypotheses and figure out the changing perceptions on CCTV effectiveness in educational facilities with more efficiency.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.135-144
• /
• 2016

It is essential to lighten the weight of switch girders in order to reduce their costs of manufacturing and make it easier to use them in construction. Lightening the weight of switch is also important to the Maglev 3-way switches system, however, the design variables should be considered very carefully if lightening is to be applied to the system, because these variables are vitally related to the levitation stability. Because Urban Maglev trains have a structure in which train bogie wraps around the guiderail, the adjustment of a girder's height is a possible way to reduce the weight. The safety of the application of this concept is ensured by repeated experiments in a test bed, however, due to a lack of space and budget limits, the design parametric study for the system model can substitute for actual application. The purpose of this paper is to study the design parameters that are concerned with levitation stability while a Maglev train is running on the Maglev 3-way system depending on the weight of the switch girders. In this study, switch girder weight is reduced by adjustment of girder height and girders are and modeled as a flexible body. The effect of the adjustment of girder height on the levitation stability can be analyzed by comparing the velocity of the train when it passes the switch girders, with the lateral gap, and the levitation gap which are obtained from the co-simulation of the Maglev train's dynamics model and flexible switching system. The results of this research will be used to design a Maglev switch.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.505-511
• /
• 2005

This experimental investigation was conducted to examine the seismic performance of reinforced concrete bridge columns. The columns were subjected to a constant axial load and a cyclic horizontal load-inducing reversed bending moment. The variables studied in this research were the volumetric ratios of transverse reinforcement (ps=0.96, 1.44 percent) and axial load ratios (P/Po=0.05, 0.1, 0.2) and concrete strengths (35, 60MPa). Test results showed that bridge columns with $44\%$ higher amounts of transverse reinforcement than that required by seismic provisions of ACI 318-02 showed ductile behavior. For bridge columns with axial load ratio(P/Po) less than 0.2, the ratio of $M_{max}\;over\;M_{ACI}$, nominal moment capacity predicted by ACI 318-02 provisions, was consistently greater than 1 with approximately a $20\%$ margin of safety.

• Journal of Technologic Dentistry
• /
• v.34 no.3
• /
• pp.249-261
• /
• 2012

Purpose: This study was carried out in order to examine the relationship of job satisfaction and quality of life on the dental technicians and to analyze its influence. Methods: A self-reported questionnaire survey was carried out by having convenience sampling as 220 dental technicians who work in Seoul Metropolis, Gyeonggi-do Province, Daejeon and Chungnam Province from March 12, 2012 to April 13. A research tool was used questionnaire that was proved reliability and validity. It was prepared with totally 50 questions such as 12 items for subjects' general characteristics, 18 items for job satisfaction measurement, and 20 items for life quality measurement. An analysis of the collected data was computationally processed by using SPSS Win 17.0 program. An analytical technique was made by using statistical techniques such as frequency & percentage, T-test or One-way ANOVA analysis. The following are the analytical results of the collected materials. Results: As a result of analyzing research subjects' job satisfaction level, there was significant difference(P<0.05) in items of religion, hobby life, working environment, and rest time out of daily work. The whole mean in job satisfaction was indicated to be relatively high with 3.13. However, job satisfaction with social recognition, salary, and safety was indicated lowly. As a result of analyzing research subjects' life quality level, there was significant difference(P<0.05) in items of religion, hobby life, working environment, and rest time out of daily work. The whole mean in quality of life was indicated to be relatively high with 3.10. However, the satisfaction was indicated lowly in the whole life quality and the life environment sphere. As a result of analyzing correlation between job satisfaction and life quality, all variables were indicated to be positive correlation in high significance level, thereby having been indicated that the higher job satisfaction leads to the higher life quality. Conclusion: As a result of research, the dental technicians' job satisfaction was indicated to have high correlation with quality of life. An effort is judged to be necessary for establishing fair compensation system, improving welfare policy and enhancing social recognition and position in order to promote dental technicians' quality of life.

• Journal of Pharmacopuncture
• /
• v.18 no.1
• /
• pp.63-71
• /
• 2015

Objectives: This study was carried out to analyze the single-dose toxicity of Eun-Bi San pharmacopuncture injected into the muscle of Sprague-Dawley (SD) rats. Methods: All experiments were performed at Biotoxtech, an institution certified to conduct non-clinical studies under the Good Laboratory Practice (GLP) regulations. Six week old SD rats reared by ORIENTBIO were chosen for this pilot study. The reason SD rats were chosen is that they have been widely used in safety tests in the field of medicine, so the results can be easily compared with many other databases. The Eun-Bi San pharmacopuncture was made in a clean room at the Korean Pharmacopuncture Institute (KPI, K-GMP). The constituents of the Eun-Bi San pharmacopuncture are Angelicae gigantis radix, Strychni semen and Glycyrrhizae radix. These were extracted at low temperature and low pressure in an aseptic room at the KPI. Doses of Eun-Bi San pharmacopuncture, 0.25, 0.5 and 1.0 mL, were administered to the experimental groups, and a dose of normal saline solution, 1.0 mL, was administered to the control group. This study was performed under the approval of the Institutional Animal Ethics Committee of Biotoxtech Co., Ltd. Results: No deaths or abnormalities occurred in any of the four groups. No significant changes in weight, hematological parameters or clinical chemistry between the control group and the experimental groups were observed. To determine if abnormalities existed in any organs and tissues, we used microscopy to examine representative histological sections of each specified organ; the results showed no significant differences in any of the organs or tissues. Conclusion: The results of this study suggest that treatment with Eun-Bi San pharmacopuncture is relatively safe and that its clinical use may be beneficial. Further evaluations and studies on this subject will be needed to provide more concrete evidence in support of these conclusions.

• The Korean Journal of Pain
• /
• v.20 no.2
• /
• pp.143-147
• /
• 2007

Background: The safety of cervical transforaminal epidural block has been the subject of debate, therefore, this study was conducted to measure the angle of the cervical transforaminal axis and to investigate its relationship to the internal jugular vein, internal carotid artery and vertebral artery. Methods: One hundred cases of cervical MRI were reviewed. The angle between a line passing through the center of the vertebral body and spinous process and a line passing through the center of the lamina in C3-4, C4-5 and C5-6 was measured and designated as A-degree. Additionally, we drew a line at the back of the vertebral artery that ran parallel to a line passing through the center of the lamina, which was presented as A-line. We then examined the distribution of the area in which the internal jugular vein and the internal carotid artery were located. Results: The mean values of the A-degree in C3-4, C4-5 and C5-6 were $53.5{\pm}4.3$, $54.2{\pm}4.6$ and $54.3{\pm}4.8$, respectively. There were no statistically significant differences among age groups or vertebral levels (ANOVA test, P > 0.05). The A-line was distributed primarily throughout zone 3, 4, and 5 in C3-4 and zone 5 in C4-5 and C5-6. Conclusions: The results of this study indicate that the mean values of A-degree were not statistically different among each age group and each vertebral level. However, the A-line may be located in the zone in which the internal jugular vein and the internal carotid artery lie and individual differences in the A-degree remain.

• Journal of Energy Engineering
• /
• v.16 no.4
• /
• pp.155-163
• /
• 2007

To insure nuclear reactor safety, the reactivity of control rods should be calculated by measuring the criticality of reactor core and it is regularly performed during the annual physics test period. Also, the core criticality should be monitored during the start-up operation to avoid reactivity induced accidents. Many research works on control rod reactivity measurement and subcriticality measurement have been accomplished throughout the world for decades and recently a new method named "Modified Neutron Source Multiplication Method (MNSM)" was proposed in Japan which is known to be improved overcoming limitations of traditional Neutron Source Multiplication Method (NSM). In this study, MNSM was tested in calculation of subcriticalities and in evaluation of application validity using the educational reactor in Kyung Hee University, AGN-201. For this study, a revised nuclear data library and a neutron transport code system TRANSX - PARTISN were established. Correction factors for various control rod positions were produced using the k-effective values and the corresponding flux distributions and adjoint flux distributions. Experimental values of the core criticality were obtained using the neutron count rates of the BF3 proportional counters. The results showed that the expected reactivity worth of control rods by MNSM agreed well with the theoretical values and the correction factors contributed much for this purpose.

• Journal of Energy Engineering
• /
• v.23 no.2
• /
• pp.149-157
• /
• 2014

The steam generator tubes of nuclear power plants have various types of corrosion failures during the plant operation. The stress corrosion cracking which occurs on the outer surface of tube is called the secondary side stress corrosion cracking and mainly occurs in the expansion-transition area of tube. The causes are the concentration of impurities by the sludge pile-up related to the geometry of its region and the residual stress by tube expansion in the process of steam generator manufacturing. Especially the directionality and sizes of residual stresses are differed according to the tube expansion methods and the direction and the frequency of tube cracks depend on their characteristics. In bases on the plant experiences, it is notified that circumferential cracks of tubes expanded with explosive expansion method are dominantly occurred compared to those of tubes done with hydraulic expansion one. Therefore in this study, according to tube expansion methods frequencies and sizes of tube cracks with specific direction are compared by means of accelerated immersion test and also the crack morphology and the specific chemicals from water-chemistry environment are observed through the fracture surface examination.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.1
• /
• pp.54-59
• /
• 2011

This test established the bioavailability and sample input by mixing the maintaining the microbial machine parts and food waste leachates in weight of 2:1 as advanced experiment, maintaining the constant temperature, agitating and observing its weight and property change for 60 hours. And, I injected daily the established microbial machine parts and food waste leachates rate, maintained the temperature in the reactor with $55{\sim}65^{\circ}C$, and agitated with constant speed. I studied the recycling possibility of food waste leachates by extracting the sample after 24 hours, verifying its characteristics, and repeating the food waste leachates input and sample extraction for about 40 days. Considering all about the results of this study, I saw that 87.32% of food waste leachates was reduced, and the solid of bluebug or food included in the food waste leachates was decomposed within 24 hrs. pH for 43 days after 9 days of stabilization period was maintained from 3.7~3.9 and the ignition loss from 88.67~87.3%, and the quantity of organic matter from 77.6~80.88%. With the similar result daily maintained, it is considered to progress more the minimization by inputting the future food waste leachates. C/N rate satisfies the less than 25 that is the composting basis within 8 days, maintaining between 13~15, with 2% of salt not exceeded, it is able to recycle as the compost of food waste leachates as based on the composting with no extracted heavy metal content.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.12
• /
• pp.1086-1092
• /
• 2012

It has been studied for DGPS/INS(Differential Global Positioning System/Inertial Navigation System) to offer the more precise and reliable navigation data with the aviation industry development. The flight performance evaluation of navigation system is very significant because the reliability of navigation data directly affect the safety of aircraft. Especially, the high-level navigation system, as DGPS/INS, need more precise flight performance evaluation method. The performance analysis is performed by comparing between the DGPS/INS navigation data and reference trajectory which is more precise than DGPS/INS. The GPS receiver, which is capable of post-processed CDGPS(Carrier-phase DGPS) method, can be used as reference system. Generally, the DGPS/INS is estimated the CG(Center of Gravity) point of aircraft while the reference system is output the position of GPS antenna which is mounted on the outside of aircraft. For this reason, estimated error between DGPS/INS and reference system will include the error due to lever arm. In order to more precise performance evaluation, it is needed to compensate the lever arm. This paper presents procedure and result of flight test which includes lever arm compensation in order to verify reliability and performance of DGPS/INS more precisely.