• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.545-552
• /
• 2021

Under the Act amended on August 4, 2011, a special fire-fighting investigation was conducted by the relevant person (owner, manager, oil refineries), and the responsibility was also given to the relevant person. Instead of directly entering all existing fire-fighting targets and investigating the maintenance and management status of fire-fighting facilities, the fire-fighting agency selects and visits some targets every year, checks the maintenance and management status of fire-fighting facilities, corrects them, and imposes fines, etc. Reasons for the introduction of the system were the establishment of a private autonomous correction system by strengthening the responsibility of officials, lack of firefighting professionals, possible corruption due to frequent public contact, and responsibility of fire agencies. However, many problems arose even after the introduction of a special fire investigation system. A special fire investigation, one of the fire safety systems, checks whether related public officials and especially fire officials are properly installed, maintained and managed in accordance with relevant laws. Special firefighting investigations were introduced as firefighting inspections at the time the firefighting law was enacted in 1958, and have undergone a revised process more than 30 times until recently. Firefighting Facility Installation, Maintenance and Safety Management Act", the existing firefighting inspection was changed to a special firefighting investigation and accepted. At the time of enactment of the Fire Service Act in 1958, a special firefighting investigation was introduced as a firefighting inspection, and until recently, more than 30 revisions have been made. In 2003, as the existing fire fighting system was divided into four laws, it was approved by changing the existing fire fighting inspection to a special fire fighting investigation in the "Fire Fighting Facility Installation, Maintenance and Safety Management Act".

• Microbiology and Biotechnology Letters
• /
• v.47 no.4
• /
• pp.645-650
• /
• 2019

Despite differences in virulence between strains of Toxoplasma gondii, rapid and accurate genotyping methods are lacking. In this study, a method was developed to detect and genotype T. gondii in food and environmental samples using PCR and a novel peptide nucleic acid (PNA) melting array. An alignment of genome sequences for T. gondii type I, II, and III obtained from NCBI was generated, and a single nucleotide polymorphism analysis was performed to identify targets for PCR amplification and a PNA melting array. Prior to the PNA melting array, conventional PCR was used to amplify GRA6 of T. gondii. After amplification, the PNA melting array was performed using two different PNA hybridization probes with fluorescent labels (FAM and HEX) and quenchers. Melting curves for each probe were used to determine genotypes and identify mutations. A 214-bp region of the GRA6 gene of T. gondii was successfully amplified by PCR. For all T. gondii strains (type I, II, and III) used to evaluate specificity, the correct genotypes were determined by the PNA melting array. Non-T. gondii strains, including 14 foodborne pathogens and 3 protozoan parasites, such as Giardia lamblia, Cryptosporidium parvum, and Entamoeba histolytica, showed no signal, suggesting that the assay has a high specificity. Although this is only a proof-of-concept study, the assay is promising for the fast and reliable genotyping of T. gondii from food and environmental samples.

• Journal of the Korean Society of Safety
• /
• v.35 no.5
• /
• pp.106-114
• /
• 2020

The two major trends that have emerged in recent years in relation to disaster recovery and recovery are 'regional infrastructure', 'regional leadership' and 'community recovery'. In the former case, it is to avoid disaster recovery and recovery by using external personnel and resources, and to maximize the resources in the area under the initiative of the residents of the affected area. And through this process, it is to prepare a new growth engine for disaster-affected areas. In addition, the latter expands disaster recovery targets to the general population living in affected areas and is not limited to victims. Through this, we can expect to recover the 'community' beyond the individual's recovery. In the Ansan of Gyeonggi-do, where many families of 'Sewolho' live, and in the Heunghae-eup of Pohang, Gyeongbuk-do, where the damage was severe, projects are underway to restore communities. And In these areas local activists and civic groups are actively utilized to efforts are being made to increase efficiency. Nevertheless, in the case of the community recovery program being promoted in Korea, there are limitations that it can be promoted only on the basis of special laws and that participation of various actors is necessary. This study intends to propose the limitations of current projects and ways to solve them by analyzing domestic and foreign cases related to the community recovery program for disaster-affected communities using local resources. we suggest two way. One is the relaxation of the national dependence of the community recovery program, and the other is to expand the area of disaster relief through.

• Fire Science and Engineering
• /
• v.32 no.3
• /
• pp.123-133
• /
• 2018

This study analyzed the effects influencing the elderly's knowledge on fire safety and practices of fire safety accident prevention after developing a Fire Safety Education Program for the elderly. The program was developed through verification using some experts and a pilot study after selecting the objective, goals, contents, and teaching & learning methods of the program based on the basic survey and literature review. The effects of the program were verified by conducting some non-equivalent control group pre- and post-tests after dividing the targets into the experimental group (the Fire Safety Education Program for the elderly was implemented) and control group (only printed hand-outs were given) among 48 elderly people no younger than 65 years of age. A paired t-test revealed some statistically significant differences between the scores of the pre- and post-tests of the experimental and control groups. ANCOVA found that the effects of the program were significantly higher than those of the printed hand-outs because the post-test scores of the experimental group were higher than those of the control group.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.5
• /
• pp.46-54
• /
• 2020

The construction industry has the most safety accidents among domestic industries. Special care must be taken because disasters in the construction industry lead to social problems caused by huge property losses and casualties. As a result of this, there is a growing awareness of disasters occurring in the construction industry, and government departments are tightening regulations on safety management. In particular, the OSHA (Occupational Safety and Health Agency) focuses on the expansion of protection targets and the clarification of responsibility in the full amendment OSHA. As a result, a study that focuses on safety management by client's responsibility is needed. In this study, the project performance capability assessment of construction project management contractors, which is being carried out with uniform assessment criteria without considering the characteristics of the construction project, is considered and all the amendments to the OSHA are considered, and the factors were derived for improvement measures.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.456-464
• /
• 2022

Objectives: The Purpose of this study is to improve work environment measurement in construction industry by survey. Especially, this study focused on the defferences between construction staffs(safety manger, health manager) and work environment measurement institution workers. Methods: Survey targets are construction staffs(safety manger, health manager) and work environment measurement institution workers. Respondent was selected by respective councils and conferences. A questionnaire consisting of items on general characteristics and the improvement of work environment measurement in construction industry. Results: Total of 134 people(39 safety managers, 27 health managers, 68 work environment measurement institution workers) responded to survey. Overall, current work environment measurement was deemed unsuitable for construction industry. There was a significant difference between construction staff and work environment institution workers in some question. On the other hand, there was no noticeable significant difference in general characteristics. Conclusions: As a result of survey, current work environment measurement was deemed unsuitable for construction industry in terms of measurement method, measurement timing, and actual site improvement. In addition, there is a statistically significant differences in response between construction staff and work environment measurement institution workers, so it is necessary to reflect both opinions in order to improve work environment measurement in construction industry.

• Spatial Information Research
• /
• v.16 no.3
• /
• pp.279-290
• /
• 2008

Landslide, one of the serious natural disasters, has Incurred a large loss of human and material resources. Recently, many forecasting or alarm systems based on various kinds of measuring equipment have been developed to reduce the damage of landslide. However, only a few of these equipments are guaranteed to evaluate the safety of whole side of land slope with their accessibility to the slope. In this study, we performed some experiments to evaluate the applicability of a terrestrial LiDAR as a surveying tool to measure the displacement of a land slope surface far a slope collapsing protection system. In the experiments, we had applied a slope stability method to a land slope and then forced to this slope with a load increasing step by step. In each step, we measured the slope surface with both a total station and a terrestrial LiDAR simultaneously. As the result of Slope Fracturing analysis using all targets, the LiDAR system showed that three was 1cm RMSE on X-axis, irregularity errors on Y-axis and few errors on Z-axis compare with Total Station. As the result of Slope Fracturing analysis using continuous targets, the pattern of Slope Fracturing was different according to the location of continuous targets and we could detect a continuous change which couldn't be found using Total station. The accuracy of the LiDAR data was evaluated to be comparable to that of the total station data. We found that a LiDAR system was appropriate to measuring the behaviour of land slope. The LiDAR data can cover the whole surface of the land slope, whereas the total station data are available on a small number of targets. Moreover, we extracted more detail information about the behavior of land slope such as the volume and profile changes using the LiDAR data.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.30 no.4
• /
• pp.331-341
• /
• 2020

Objectives: This study was conducted to evaluate perceptions of safety and risk among Korean industrial hygienists and the change between before and after the Sewol Ferry Disaster in 2014. Two surveys with questionnaires composed of 51 questions were completed by attendees of the Korea Industrial Hygiene Association(KIHA) conference. Methods: One was conducted at the 2013 KIHA Fall Conference(N=181) and the other was from the 2014 KIHA Summer Conference(N=123). Between these two surveys was the Sewol Ferry Disaster on April 14, 2014, which was believed to seriously affect safety and risk perceptions in Korea. Results: It was revealed that industrial hygienists' awareness of safety rules strengthened after the Sewol Ferry Disaster(p<0.05). It was apparent that people over the age of 30 were more sensitive to social safety. There was no significant difference in the evaluation and attitude regarding governmental safety policy between the years of 2013 and 2014. The credibility of public organizations responsible for the disaster management system decreased. The self-evaluation of respondents' safety level also decreased. This trend shows mainly in the younger generation. It was evaluated that the overall social safety level decreased and the anxiety level increased. The score on social safety on a ±5 Likert scale was 0.68 in the 2013 survey and -0.33 in the 2014 survey(p<0.05). It was reported that the most serious threat factors for accident or disaster were 'building collapse > illegalities and corruption > side effects of radiation therapy >accidents in normal activity > occupational disease,' in order. They picked 'safety ignorance > hurry-up habits and culture > focusing on short-term benefit > easy-going attitude > insufficient safety education' for the causes of low social safety levels in 2013. In 2014, they were 'safety ignorance > easy-going attitude > focusing on short-term benefit > insufficient safety education > hurry-up habits and culture'. Conclusions: This study has some limitations because it was originally not designed to survey attitudes prior to the Sewol Ferry disaster in 2013. In addition, the survey targets are industrial hygienists who are familiar with occupational disease and injury.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.2
• /
• pp.71-83
• /
• 2023

Since last year, the government has enforced the 'Act on the Punishment of Severe Accidents, Etc.' (hereafter referred to as the 'Serious Accident Punishment Act'), which punishes business owners and business managers who fail to fulfill their duty of safety measures with 'imprisonment of one year or more' and the Occupational Safety and Health Act. Based on this, various occupational safety and health policies were developed, including the operation of a system related to entrusting the work of safety managers. Despite these efforts, the effect of implementing the Severe Accident Punishment Act is a groundbreaking change in the current disaster prevention policy, which has increased by 0.02%P and 0.03‱P, respectively, from the previous year to 0.65% of the total accident rate and 1.10‱ of the death rate per 10,000 people as of 2022. As the need emerged, attention was paid to 'collaboration and governance with safety management institutions' in the 'Severe Disaster Reduction Roadmap' announced by the Ministry of Employment and Labor in November 2022. In this study, a meaningful result was derived by comparing and analyzing the industrial accident status of workplaces entrusted by "A" safety management institutions with the national average based on the industrial accident survey table, and the types of industrial accidents that occurred in consigned workplaces were selected as intensive management targets. The policy direction for industrial accident prevention was established. It is necessary to develop safety management work manuals based on the results of this study, expertise, discover best cases of risk assessment and develop guides, and educate and train consigned workers. In addition, it suggests that the government's guidance and supervision are needed to advance the professionalism of safety management entrusted tasks, and that safety management institutions should strengthen their roles and functions for preventing and reducing industrial accidents. However, due to difficulties in disclosing information of specialized safety management institutions, the limitation of the provision, collection, and viewing of research-related data to "A" specialized safety management institutions remains a limitation of the research. It seems likely that more thorough research will be conducted.

• Journal of Internet Computing and Services
• /
• v.11 no.2
• /
• pp.1-15
• /
• 2010

The damage of safety accidents at home can be minimized by preventing accidents in advance as well as by coping with the accidents promptly through the help of safety management system. In this paper, we identify several services to prevent and cope with the accidents that may occur at home by leveraging sensors and wireless network technology available at home network environments. In order to provide these services, we propose a context-aware system for safety management at home. The proposed system awares the dangerous situations through the information collected by the sensors in home network environment. The proposed system tries to not only prevent the accidents but also to cope with the situations using the information of rescue targets and the location where the accident occurs. We evaluate the appropriateness of sensors by implementing the proposed environments. Through OPNET simulation experiments, we also measure the amount of network traffic in order to confirm that the bandwidth of IEEE 802.15.4 is enough for the proposed system. Finally, we determine more appropriate wireless data transmission mechanism with respect to the end-to-end delay and battery consumption for the proposed system.