• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.3
• /
• pp.217-223
• /
• 2017

In order to assess risk as a basic step for securing safety, it requires to select risk factors and determine the frequency and the severity of the consequence of each risk factor. This research adopted common risk factors among well-known maritime risk assessment models, and proposed objective criteria to gauge the risk level of each risk factor. The starting points of risk evolution were chosen for criteria according to related studies and seafarers' experience. The rate of risk appearance over the criteria is named as the incidence of risk factor. Therefore, the total risk level is expressed as the combination of incidence of each risk factor and severity. This quantitative method would be applied to measuring and comparing the risk level of target maritime zones, and it would also be useful to survey which risk factor be focused for reducing the total risk of a certain maritime zone.

• Proceedings of the Korean Reliability Society Conference
• /
• 2001.06a
• /
• pp.385-387
• /
• 2001

This is a brief report oil the characteristics of elderly persons in Korea for product liability and product safety. Recently. the elderly persons rapidly go on increasing in number. So, the considerations of their characteristics in product design become more and more important not only for product safety but for the commercial target. We describe a result from the survey on some of the characteristics such as Stereotypical or common expectations in type, size, motion characteristics, and direction of control operation(i.e., population stereotypes), depth perception, and tracking performance through a structured interview and experiments. This basic study will go on.

• Journal of the Korean Society of Systems Engineering
• /
• v.16 no.1
• /
• pp.84-97
• /
• 2020

This paper aims to develop an optimized inventory management method for safety critical Instrument and Control (I&C) components. In this regard, the paper focuses on estimating the consumption rate of I&C components using demand forecasting methods. The target component for this paper is the Foxboro SPEC-200 controller. This component was chosen because it has highest consumption rate among the safety critical I&C components in Korean OPR-1000 NPPs. Three analytical methods were chosen in order to develop the demand forecasting methods; Poisson, Generalized Linear Model (GLM) and Bootstrapping. The results show that the GLM gives better accuracy than the other analytical methods. This is because the GLM considers the maintenance level of the component by discriminating between corrective and preventive.

• Journal of Industrial Technology
• /
• v.28 no.B
• /
• pp.157-165
• /
• 2008

Level II AFDA and Level III MCS reliability models are applied to analyze the stability of armor units on trading and coastal harbors in Korea. Hudson's formula and Van der Meer's formula are used in this reliability analysis. Also, probability density functions of reliability index and probability of failure are derived by the additional analysis. In addition, the partial safety factors of all harbors related to armor units can be straightforwardly evaluated by the inverse-reliability method. The upper and lower limits and average level of partial safety factors can be statistically investigated with the results of all cases applied in this paper. Therefore, it may be possible to design armor units of new breakwaters including the uncertainty of random variable and target level by using the present results.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.03a
• /
• pp.466-475
• /
• 2006

Reliability analysis between safety factor and reliability index for driven and bored pile load capacity was analyzed in this study. 0.1B, Chin, De Beer, and Davisson's methods were used for determining pile load capacity by using load-settlement curve from pile load test. Each method define ultimate, yield and allowable pile load capacities. LCPC method using CPT results was performed for comparing with results of pile load test. Based on FOSM analysis using load factors, it is obtained that reliability indices for ultimate pile load capacity were higher than those of yield and allowable condition. Present safety factor 2 for yield and allowable load capacities are not enough to satisfy target reliability index $2.0\sim2.5$. However, it is sufficient for ultimate pile load capacity using safety factor 3.

• International Journal of Concrete Structures and Materials
• /
• v.3 no.2
• /
• pp.103-110
• /
• 2009

Concrete carbonation is a cause of problems in concrete structures, so it needs to be estimated. And concrete cover is designed to protect structures from this damaging. Usually the cover thickness is considered based on the limit states design codes in which the important target is the reliability safety index. However, it is not clear that whether the safety index determined is optimal or not with respect to the cost. The codes are mainly proceeded quantitatively (i.e. making a safe structure) while the economic aspects are only considered qualitatively. So the reliability-based design considering life cycle cost (LCC) is called for, and here the focus is on the advanced analysis solution to optimize the reliability safety regarding LCC.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.5
• /
• pp.162-168
• /
• 2013

Recently, there have been efforts in many countries to reduce social expenses and casualties resulting due to car accidents. As such, ASS (active safety systems) are being researched and developed to prevent accidents and target mitigation. Among many useful active safety systems, it has been reported that commercial AEBS (Advanced Emergency Braking System) effectively prevents accidents and reduces casualties simultaneously. Accordingly, it is necessary to set Korean AEBS standards, and this research analyzes international AEBS standards for this necessity. In addition to the evaluation methodology of AEBS ECE Regulation, this study suggests traffic scenarios that occur frequently in domestic road environments, and provides an evaluation system for AEBS of the scenarios. Finally, the performance and safety of AEBS are evaluated through field test.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.1
• /
• pp.111-117
• /
• 2010

This thesis draws institutional problem about safety of architectural structure through analysis of architectural structure regulation. The law of analysis target are building codes, enforcement ordinance of building codes, enforcement regulations of building codes, regulation for structure standards of building, building structure standards. The analysis showed there are imperfections in confirmed procedural application of structure safety and suggested reformation. It's necessary to make supplementary policies for the suitability of the term use and the structure safety certificate of compliance, establishing a special structure code.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.3
• /
• pp.30-34
• /
• 2022

The CFT(Cornering Fatigue test) and RFT(Radial Fatigue Test) are tests for evaluating the endurance of the disc and rim region of the wheel. In recent, automobile wheel safety standards have been revised and the applied load and target life criteria are different from existing conditions. The verification evaluation of all wheels requires a lot of time and cost. In this study, the endurance severity of each test was compared through strain-life approach by selecting 4 steel and 8 aluminum wheels.

• Journal of the Korean Society of Systems Engineering
• /
• v.17 no.2
• /
• pp.37-48
• /
• 2021

Improving the plant protection system against unforeseen changes/transients during operation is essential to maintain plant safety. Under this condition, it requires rapid and accurate signal processing. The use of an Intellectual Property (IP) core for floating point calculations for Safety Critical MMIS can make numerical computations easier and more precise, improving system accuracy. It can represent and manipulate rational numbers as well as a much broader range of values with dynamic range in nuclear power plant. Systems engineering approach (SE) is used through the development process, it helps to reduce complexity and avoid omissions and invalid assumptions as delivers a better understanding of the stakeholders needs. For the implementation on the FPGA target board, the 32-bit floating-point arithmetic with IEEE-754 standards has designed using Simulink model in Matlab for all operations of addition, subtraction, multiplication and division and VHDL code generated.