• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.61-67
• /
• 2014

When a manual transmission equipped car stops on an incline where the nose of the car is higher than the rear, hill-start control or hill-holder could prevent the vehicle from rolling backward as the car moves forward. The easy-hill assist valve consists of a check valve and a needle type ON/OFF solenoid valve connected in parallel; it is a hydraulic actuator that can maintain brake pressure using an electrical signal from the ECU. As the EHA valve is a safety-related component of the brake system, high reliability as well as superior dynamic performance is required for it to be applied in commercial vehicles. This paper presents the design of the EHA valve as a piece of equipment that can simulate the brake actuation pressure with a pressurizing piston. Following specific test standards, the experimental results validate the implemented functions of the test equipment, proving the test stand to be effective for the performance and endurance of the EHA valve.

• Journal of the Korean Society of Safety
• /
• v.22 no.2 s.80
• /
• pp.59-66
• /
• 2007

As the need of handling heavy materials increases, various cranes are used in industries. However, the effectiveness of crane also entails industrial accidents such as falling, constriction etc. In fact, the number of fatal accidents caused by crane is still high in Korea. To find out the causes of the accidents in terms of human error, we developed a man-machine system model that consists of two axes; human information processing and crane life cycle. In the human information processing dimension, we simplified it as five functions; sensing and perception, decision making and memory, response etc. In the crane life cycle dimension, we divided it into nine phases; design, production, operation etc. For the 152 fatal accident records during 1999-2006 years, we classified them into 45 cells made by two axes. Then we identified the preceding causes of the classified crane accident based on performance shaping factors. As the results of statistical analysis, the overall trend of crane fatal accidents was described. For the cause analysis, wrong decision making in work plan phase shows the highest frequency. Next, the poor information input in crane operation followed in accident frequency. In ergonomics view, the problems of interface design in displays and controls made 11.8% of fatal accidents. Following the analysis, several ergonomic design guidelines to prevent crane accidents were suggested.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7380-7384
• /
• 2014

Evacuation fire doors were manufactured by applying phosphorescent paint to the whole fire door whose performance was already recognized, and applying heat sensitive paint around the grip. The facility was improved by the evacuation and safety functions on the fire door, which has been used as only a fire facility, and the fire door is also used as an evacuation facility. The brilliance of the evacuation safety fire door manufactured in this study passed the brilliance test of Korea Fire Institute with a performance more than the brilliance (7mcd after 60 minutes) of the existing inducement sign. During a fire, the visible area is larger than the evacuation door inducement, etc. and light preventive status in the lower part of the fire door was observed during the descent of smoke. Therefore, it is considered to extend the evacuation effective time of evacuators. In heat sensitive paint applied around the grip, a color change is observed on the fire door when approaching a certain temperature ($70^{\circ}C$). Therefore, the first disaster that evacuators can encounter on the grip of a fire door during a fire can be prevented and should be helpful in recognizing the backfiring possibility and preventing safety accidents for firefighters who must enter a fire space.

• Journal of Korean Society of Transportation
• /
• v.31 no.4
• /
• pp.85-94
• /
• 2013

The Continuous Risk Profile (CRP) has been well known to be the most accurate and efficient among existing network screening methods. However, the classical CRP uses safety performance functions (SPFs) which require a huge investment to construct a database system. This study aims to suggest a new CRP method using average crash frequencies of homogeneous groups, instead of SPFs, as rescaling factors. Hierarchical clustering analysis is performed to classify freeway segments into homogeneous groups based on the data of AADT and number of lanes. Using the data from I-880 in California, the proposed method is compared to other several network screening methods. The results show that the proposed method decrease false positive rates while it does not produce any false negatives. The method developed in this study can be easily applied to screen freeway networks without any additional complex database systems, and contribute to the improvement of freeway safety management systems.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.71-78
• /
• 2009

During a learning process, a human being is assumed to experience knowledge-based behaviors, rule-based behaviors, and skill-based behaviors sequentially if Rasmussen was right. If any psycho-physiological symptom to those different levels can be obtained, it can be useful as a measure whether a human being is fully trained and has gotten a skill in his work. Therefore, this study aimed to draw relationships between human performance measures and psycho-physiological measures while committing a computer-simulated pointing task by utilizing the power spectrum technique of EEG data, especially with the ratio of relative beta-to-alpha band power. The result showed that, during correct responses, the ratio came to stabilize as all the performance data went stable. However, response time was not a simple linear function of task difficulty level only, but a joint function of task characteristics as well as behavior levels. Comparing relative band power ratios from errors and correct responses, activated states of one's brain could be explained, and characteristics of the task could understood. To tell that of pointing task, correlations around C3, C4, P3, P4 and 01, 02 area were significant and high in correct response cases whereas most correlation coefficients went down in error cases standing for imbalance of psycho-motor functions. Though task difficulty was the only one factor that could influence on relative band power ratio with statistical significance, it should be comprehended to mean a different way of expression indicating task characteristics since at least error-some situation could be explained with the help of relative band power ratio that absolute band power failed.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.609-618
• /
• 2024

System reliability prediction in the development stage is increasingly crucial to reliability growth management to satisfy its target reliability, since modern system usually takes a form of complex composition and various complicated functions. In most cases of development stage, however, the information available for system reliability prediction is very limited, making it difficult to predict system reliability more precisely as in the production and operating stages. In this study, a system reliability prediction process is considered when the reliability-related information such as SIL (Safety Integrity Level) and MTTFd (Mean Time to Dangerous Failure) is available in the development stage. It is suggested that when the SIL or MTTFd of a system component is known and the field operational data of similar system is given, the reliability prediction could be performed using the scaling factor for the SIL or MTTFd value of the component based on the similar system's field operational data analysis. Predicting a system reliability is then adjusted with the conversion factor reflecting the temperature condition of the environment in which the system actually operates. Finally, the case of applying the proposed system reliability prediction process to a high performance mooring platform is dealt with.

• Nuclear Engineering and Technology
• /
• v.49 no.7
• /
• pp.1423-1430
• /
• 2017

Detonation cell width is an important parameter in hydrogen explosion assessments. The experimental data on gas detonation are statistically analyzed to establish a universal method to numerically predict detonation cell widths. It is commonly understood that detonation cell width, ${\lambda}$, is highly correlated with the characteristic reaction zone width, ${\delta}$. Classical parametric regression methods were widely applied in earlier research to build an explicit semiempirical correlation for the ratio of ${\lambda}/{\delta}$. The obtained correlations formulate the dependency of the ratio ${\lambda}/{\delta}$ on a dimensionless effective chemical activation energy and a dimensionless temperature of the gas mixture. In this paper, support vector regression (SVR), which is based on nonparametric machine learning, is applied to achieve functions with better fitness to experimental data and more accurate predictions. Furthermore, a third parameter, dimensionless pressure, is considered as an additional independent variable. It is found that three-parameter SVR can significantly improve the performance of the fitting function. Meanwhile, SVR also provides better adaptability and the model functions can be easily renewed when experimental database is updated or new regression parameters are considered.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.6
• /
• pp.639-646
• /
• 2002

In this paper, we discuss the system configuration and the design issues of CATS-i, a set of installation and administration tools for Linux cluster systems. CATS-i enables users to manage cluster systems easily, quickly, and safety. It integrates many functions, ranging from installing operating systems and applications to real-time monitoring and management of various important resources. In addition, batch job submission and management are included. These functions support a single system image. Finally, a powerful graphic user interface based on Java lets users quickly understand the cluster status and conveniently use the CATS-i on the Web.

• Nuclear Engineering and Technology
• /
• v.44 no.6
• /
• pp.697-708
• /
• 2012

The majority of instrumentation and control (I&C) systems in today's nuclear power plants (NPPs) are based on analog technology. Thus, most existing I&C systems now face obsolescence problems. Existing NPPs have difficulty in repairing and replacing devices and boards during maintenance because manufacturers no longer produce the analog devices and boards used in the implemented I&C systems. Therefore, existing NPPs are replacing the obsolete analog I&C systems with advanced digital systems. New NPPs are also adopting digital I&C systems because the economic efficiencies and usability of the systems are higher than the analog I&C systems. Digital I&C systems are based on two technologies: a microprocessor based system in which software programs manage the required functions and a programmable logic device (PLD) based system in which programmable logic devices, such as field programmable gate arrays, manage the required functions. PLD based systems provide higher levels of performance compared with microprocessor based systems because PLD systems can process the data in parallel while microprocessor based systems process the data sequentially. In this research, a bistable trip logic in a reactor protection system (RPS) was developed using very high speed integrated circuits hardware description language (VHDL), which is a hardware description language used in electronic design to describe the behavior of the digital system. Functional verifications were also performed in order to verify that the bistable trip logic was designed correctly and satisfied the required specifications. For the functional verification, a random testing technique was adopted to generate test inputs for the bistable trip logic.

• Smart Structures and Systems
• /
• v.18 no.2
• /
• pp.317-334
• /
• 2016

Structural Health Monitoring System (SHMS) works as an efficient platform for monitoring the health status and performance deterioration of engineering structures during long-term service periods. The objective of its installation is to provide reasonable suggestions for structural maintenance and management, and therefore ensure the structural safety based on the information extracted from the real-time measured data. In this paper, the SHMS implemented on a world-famous kilometer-level cable-stayed bridge, named as Sutong Cable-stayed Bridge (SCB), is introduced in detail. The composition and core functions of the SHMS on SCB are elaborately presented. The system consists of four main subsystems including sensory subsystem, data acquisition and transmission subsystem, data management and control subsystem and structural health evaluation subsystem. All of the four parts are decomposed to separately describe their own constitutions and connected to illustrate the systematic functions. Accordingly, the main techniques and strategies adopted in the SHMS establishment are presented and some extension researches based on structural health monitoring are discussed. The introduction of the SHMS on SCB is expected to provide references for the establishment of SHMSs on long-span bridges with similar features as well as the implementation of potential researches based on structural health monitoring.