• Journal of the Korea Safety Management & Science
• /
• v.25 no.3
• /
• pp.55-62
• /
• 2023

Public institutions have a responsibility to ensure the safety of their employees and the public. One way to do this is to implement a systematic safety inspection system based on risk assessments and continuous improvements. This study developed a systematic safety inspection system for public institutions that are ordered construction projects. The proposed system in this study consists of a three-step process: (1) developing safety grade evaluation tables, (2) preparing and conducting safety inspections, and (3) evaluating and improving safety management grades. The first step is to develop safety grade evaluation tables by analysis and diagnosis of the construction site's work type, disaster statistics, and related laws. The second step is to conduct safety inspections using the developed evaluation tables. The third step is to determine the safety management grade based on the results of the safety inspection, and to improve risk factors found during the safety evaluation. The proposed system was implemented in highway construction projects carried out by public institutions. The results showed that the proposed system has two major effects: (1) reducing accident-related deaths and injuries, (2) improving safety management levels by continuous evaluation and improvement. The proposed system can be utilized in construction projects ordered by public institutions to improve the level of occupational safety and health.

• Human Ecology Research
• /
• v.54 no.1
• /
• pp.69-81
• /
• 2016

Consumer anxiety about food safety is increasing, and the ability to make an accurate assessment is inadequate due to the lack of food safety information. This research focuses on relations among main variables, such as food hazard awareness, food apprehension, food safety information awareness, and food safety management system evaluation. In addition, to the moderating effects of food safety information awareness between food hazards awareness, food apprehension, and food safety management system evaluation. First, food hazards awareness and apprehension was slightly higher than the average level, also there was a significant difference in food hazard apprehension according to food hazard awareness. However, the level of food safety information was not high, meaning consumers were not as well informed as expected. We divided food safety management system evaluation into awareness and practice, subsequently, the results of both were at a low level. Food safety information awareness' moderating effect was also confirmed. Consumer organizations and the government need to provide specific and correct information to Korean consumers, that also implement a wide range of consumer education related policies.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.40-45
• /
• 2017

Among various methods to build the construction safety, the consecutive improvement by the measuring and evaluating safety management capabilities for the construction participants such as an owner, a contractor, and a supervisor (construction project manager) can be the effective one. Thus, an effective evaluation and grading criteria to provide performance index for the implementation of safety management activities should be necessary. In this regards, the purpose of this study is to verify the adequacy by offering a competency evaluation system for the supervisor's safety capability and by applying the system to some construction sites. The proposed evaluation system was developed on the basis of the principles of safety management & accident prevention, basic elements of safety and health management system, and safety evaluation cases at home and abroad. The trial evaluation showed that the safety management of the construction site is mainly carried out by the contractor and the supervisor's awareness for the safety management is low on the whole. Especially, it is urgent to improve the support system from the supervisor headquarter and to place the dedicated safety management person in the field.

• Journal of the Korean Institute of Gas
• /
• v.21 no.6
• /
• pp.81-87
• /
• 2017

SOFC(Solid Oxide Fuel Cell) is one of the high-temperature fuel cells, SOFC system and Stack has a high temperature operating Characteristics. These Characteristics cause a lot of trouble in the design of the system and selection materials, securing durability, and securing safety performance. Therefore, For Commercialization and Supply of SOFC, the development of safety performance assessment techniques and evaluation systems should go together. In this study, we analyzed the evaluation items of SOFC Safety performance standards and risk factors of the stack for design of stack safety performance evaluation system. Based on the analyzed data, the evaluation item was deducted for design of stack safety performance evaluation system. Through the results of this study, we expect to facilitate the supply of SOFC and contribute to a safe use environment.

• Journal of the Korean Society of Safety
• /
• v.38 no.3
• /
• pp.61-68
• /
• 2023

This study performed a structural performance evaluation of a system scaffolding for elevator installation work developed in previous studies. The structural performance was evaluated via a structural test conducted to apply the working load specified in the design standard. The deflection of the horizontal member and the stress of each member constituting the system scaffolding were measured. Consequently, the structural safety evaluation including structural behavior and required performance was performed using the deflection and stresses measured from the structural test. The structural test and safety evaluation results based on the heavy working load corresponding to the design load indicated that the deflection, which is the performance criterion of the horizontal member, did not exceed the allowable value. Further, each member's stress, which is a safety evaluation indicator, did not exceed the allowable strength for both horizontal and vertical members with bending behavior and fordable bracing with tensile behavior, while also satisfying the required safety factor. In addition, the results confirmed the safety against deformation, partial damage, and destruction owing to excessive and maximum load. Therefore, the system scaffolding developed in this study satisfies both the structural performance and safety required by the design standards; thus, it can be applied to elevator installation work sites.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.3
• /
• pp.1-8
• /
• 2008

Risk is the probability of an adverse event given exposure to hazard. There are many reason for unsafety situation without safety operation. The reason is no safety evaluation system in small enterprise. And then this study purposes safety management activities that is evaluation system for total safety efficiency's maximization. Therefore, in this study, this model that can evaluate quantitative activities in small enterprise that maximize safety efficiency wishes to do design using balanced scorecard. In other words, this study aims to suggest a performance measurement model reflecting the characteristics of safety evaluation system, especially the model for return manufacturing related to safety, and to develop the S-BSC(Safety-Balanced ScoreCard) measurement model using a weight lifetime value to which a relative weight is applied by using AHP based on the BSC.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.127-134
• /
• 2012

Plant safety management that is enforcing introducing more than 95% in domestic manufacturing industry is using total plant efficiency by the evaluation index, and as a result, can see a lot of examples that plant productivity, economy and safety is increased. The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. This study's purpose centers plant safety management activities that is management system for plant production and safety efficiency's maximization, plant evaluation system that plant safety management activities factor(reliability, maitainability, safety, service quality) that is enforcing in manufacturing industry can develop evaluation model that can evaluate qualitative activities by quantitative activities in process that maximize plant safety management wishes to do design.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.3
• /
• pp.69-80
• /
• 2003

This study researched problems of safety inspection method and current legislative system for the structure safety evaluation of Rahmen structure affected by remodeling. The elements of weight increase were examined in terms of differences of load moment, shear force, compressive stress and amount of steel before and after remodeling by structure analysis. The thorough examination for impacts of weight increase is indispensable to change of use or extension.

• Biomolecules & Therapeutics
• /
• v.22 no.6
• /
• pp.558-562
• /
• 2014

Tramadol is an opioid analgesic agent that has been the subject of a series of case reports suggesting potential for misuse or abuse. However, it is not a controlled substance and is not generally considered addictive in Korea. In this study, we examined the dependence potential and abuse liability of tramadol as well as its effect on the dopaminergic and serotonergic systems in rodents. In animal behavioral tests, tramadol did not show any positive effects on the experimental animals in climbing, jumping, and head twitch tests. However, in the conditioned place preference and self-administration tests, the experimental animals showed significant positive responses. Taken together, tramadol affected the neurological systems related to abuse liability and has the potential to lead psychological dependence.

• Journal of Advanced Navigation Technology
• /
• v.19 no.2
• /
• pp.91-97
• /
• 2015

This paper specifies several considerations about assessing safety-critical software in the aerospace domain. In order to evaluate safety critical software in the aerospace industry, it is required to identify an information of evaluation criteria of software under evaluation. The information is specified in the standard, but determination of evaluation criteria cannot be decided by itself and depends on the results of safety assessment of a system and system design. Thus, this paper explains required information of system development standard and safety assessment standard to determine software evaluation criteria. It surveys existing methodologies about evaluating software, and suggests method which is adapted to evaluation of an advanced surface movement guidance and control system (A-SMGCS) software.