• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1614-1621
• /
• 2008

I accomplished a curve section traveling safety assessment analysis followed with railway condition for elevation of a curve passage speed of train utilizing trail analysis model. As a result, we confirmed that excess cant influence in badly traveling safety of train followed with cant change and cant shortage influence in badly traveling safety in case of large a curve radius and traveling safety of originally a curve section is most wrong. Also we confirmed that shortage of relief a curve length influence in badly traveling safety followed with change of relief a curve length.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.12
• /
• pp.1301-1309
• /
• 2008

The curved portion fur each section running safety evaluation interpretation according to the track condition for improving the curved portion passage rate of a vehicle by using the multibody analysis model of the Saemaeul train was carried out. As a result, The excess of cant reaches the bad effect to the running safety in case the radius of curvature is small. In case the radius of curvature was large, we could confirm that the deficiency of cant reached the bad effect to the running safety. In the curved portion, the circular curve section most badly showed the running safety. The deficiency of curve length reaches the bad to the running safety. In the curved portion, the circular curve section most badly showed the running safety. Therefore the track condition(cant, transition curve length, etc) can reach the bad effect to the running safety of a vehicle, the exact design is required.

• Journal of the Korean Society for Railway
• /
• v.13 no.5
• /
• pp.509-515
• /
• 2010

Primary function of a transition curve is to accomplish gradual transition from the straight to circular curve, so that curvature changes from zero to a finite value. The transition curve enhances the running safety and ride comfort of the vehicle in curve. There are a couple of transition curve such as clothoid, cubic parabola and cosinusoidal curve, etc. In this study, running behaviors of cubic parabola and cosinusoidal curve were investigated and compared by numerical analysis result using VAMPIRE program. Ride comforts for an individual transition curve were evaluated for each transition curve and running behavior and safety were also evaluated to compare the capacity of transition curves.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.4
• /
• pp.23-29
• /
• 2008

This research proposes two sub-models and one integrated model for the classification of safety in curve section of road, where the fatal-rate is relatively higher in accidents. The first sub-model calculates the accident-rate by safety-index that is based on the road geometries. The second decides the safety of curve section by the speed difference between before and in the curve. Finally, the integrated model of two sub-modules can classify the safety of curve section of road.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.211-218
• /
• 2012

Two experiment are planed to identify driver's safe driving behaviour by curve radius, road surface condition in curve section. At four-lane and two-lane road, conducted experiments are check on driver's feeling of safety that 30 subjects do not feel discomfort. And using the data from these experiments, this study compare physical speed (not slipping, fall our of the road) with safety driving speed(drivers felt a comfortable and safe speed) each curve radius and fiver road surface condition(drying, wet, rain, snow and ice). As a result, safe driving behaviour factors that are derived to curve radius of 100m units, five road surface conditions enable to represent quantitative analysis of driver's discomfort. This study will develop road design method and evaluation reflected ergonomic aspects.

• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.47-56
• /
• 2015

PURPOSES: The purpose of this study is to estimate the impact of variable message signage (VMS) on traffic safety as a function of road curve radius using statistical methods. METHODS: In order to analyze the impact of VMS installations on traffic safety, travel speed, lateral distance, and geometric data relating to road curvature in each study area was acquired and analyzed for the impact of providing VMS information on driver performance and traffic safety using statistical methods including student t-test, Mann-Whitney test, and the Anderson-Darling test for estimating traffic safety hazard zone in each lane. RESULTS: As a result of analyzing driver performance characteristics before and after providing VMS information, it was determined that by providing VMS information, mean travel speed is deceased and vehicles are driven with increased precision, following the centerline in the first and second lanes. Also the results of analyzing traffic safety impacts of VMS indicate that traffic safety performance factors in the first lane of the Gapyeong section can, on average, increase in the left and right side of the lane by 19.22% and 68.98%, respectively, and in the case of the second lane, safety impacts, on average, can increase in both sides by 100%. For the Hongcheon section, traffic safety impacts in the first lane, on average, can increase along the left and right sides of the lane by 32.31% and 47.18%, and within the second lane, traffic safety can be increased along the left and right side of the lane by 10.97% and -0.01%, respectively. CONCLUSIONS: Based on the results of this study, the impact on traffic safety obtained by providing VMS information for road sections with smaller curve radii is greater than can be obtained for road sections with larger curve radii.

• Geomechanics and Engineering
• /
• v.28 no.1
• /
• pp.77-87
• /
• 2022

Many geotechnical analyses require the investigation of water flow within partially saturated soil zone to incorporate the effect of climatic conditions. It is widely understood that the hydraulic properties of the partially saturated soil should be included in the transient seepage analyses. However, the characteristics of dual porosity soils with dual-mode water retention curve are normally modelled using single-mode mathematical equation for simplification of the analysis. In reality, the rainwater flow can be affected significantly by the dual-mode hydraulic properties of the soil. This paper presents the variations of safety factor for dual porosity soil slope with dual-mode water retention curve and dual-mode unsaturated permeability. This paper includes the development of the new dual-mode unsaturated permeability to represent the characteristics of soil with the dual-mode water retention curve. The finite element analyses were conducted to examine the role of dual-mode water retention curve and dual-mode unsaturated permeability on the variations of safety factor under rainfall loading. The results indicate that the safety factor variations of dual porosity soil slope modelled using the dual-mode water retention curve and the unsaturated permeability equation are lower than those of dual porosity slope modelled using single-mode water retention curve and unsaturated permeability equations.

• Journal of the Korean Society of Safety
• /
• v.12 no.3
• /
• pp.45-51
• /
• 1997

To evaluate the elastic-plastic fracture toughness by this modified offset method, the origin of J-R curve is set with drawing the blunting line on the maximum point of the negative crack growth and R curve is modified by adding the blunting factor of the experimented point on the R curve. The elastic-plastic fracture toughness $J_{IC]$ of A5083-H112 material by the modified offset method we 44kN/m on the smooth CT specimens.

• Journal of Food Hygiene and Safety
• /
• v.26 no.2
• /
• pp.114-119
• /
• 2011

In this study, two duplex real-time PCR approach with melting curve analysis is presented for the detection of Escherichia coli O157:H7, Listeria monocytogenes, Salmonella spp. and Staphylococcus aureus, which are important food-borne bacterial pathogens usually present in fresh and/or minimally processed vegetables. Reaction conditions were adjusted for the simultaneous amplification and detection of specific fragments in the ${\beta}$-glucuronidase (uidA, E. coli), thermonuclease (nuc, S. aureus), hemolycin (hly, L. monocytogenes) and tetrathionate reductase (ttr, Salmonella spp.) genes. Melting curve analysis using a SYBR Green I real-time PCR approach showed characteristic $T_m$ values demonstrating the specific and efficient amplification of the four pathogens; $80.6{\pm}0.9^{\circ}C$, $86.9{\pm}0.5^{\circ}C$, $80.4{\pm}0.6^{\circ}C$ and $88.1{\pm}0.11^{\circ}C$ for S. aureus, E. coli O157:H7, L. monocytogenes and Salmonella spp., respectively. For all the pathogens, the two duplex, real-time PCR was equally sensitive to uniplex real-time PCR, using same amounts of purified DNA, and allowed detection of 10 genome equivalents. When our established duplex real-time PCR assay was applied to artificially inoculated fresh lettuce, the detection limit was $10^3$ CFU/g for each of these pathogens without enrichment. The results from this study showed that the developed duplex real-time PCR with melting curve analysis is promising as a rapid and cost-effective test method for improving food safety.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.3D
• /
• pp.403-412
• /
• 2011

On a curve radius, there is speed deviation because a driver who is on the curve radius can have visual distortion. The curve radius can be more dangerous than a straight radius by many reasons. Especially, visibility paralysis of delineator that is because of night and bad weather. Can pervert the information about curve sections, it threatens safety. More over accident risk is increased by influence to travel speed. Therefore, it needs to build and control delineators for driver's visibility. Therefore, this study focus on finding the two types of delineator(the retro-reflection and inside-lighting delineator) by insight-surveying and the operating speed are compared by survey and operating speed. Finally, inside-lighting delineator will be selected in terms of safety at the curve sections. The inside-lighting delineator was more effective than the retro-reflection delineator on visibility, the necessity of reduction of speed and will reduce the hazard at curve sections. Also, the study analyzes safety is guaranteed by the slight reduction of speed when the driver enters a curve radius with inside-lighting delineator. As a result, the inside-lighting delineator can give the information about horizontal and vertical profile effectively, so it can reduce the accident risk. And it can use to improve traffic safety on curve radius.