• 한국항해항만학회지
• /
• 제34권5호
• /
• pp.343-348
• /
• 2010

해상 교통량이 증가함에 따라 높아지는 선박 사고위험을 줄이기 위해 안전 운항을 위한 시스템은 필수적이다. 국제해사기구의 SOLAS에서는 선박에 AIS(Automatic Identification System)의 탑재를 의무화 하였다. AIS는 육상과 타 선박에 신원, 종류, 위치, 항해 상태를 포함한 각종 항해정보와 선박상태를 자동으로 알리는 시스템이다. 안전운항을 위한 응용서비스 개발의 대부분의 경우에 AIS는 활용될 수 있으므로, 체계적인 정보의 관리가 필요하다. 본 논문에서는 수신된 메시지 정보를 관리하기 위해 데이터베이스를 도입하였다. AIS메시지를 정적정보와 동적정보로 나누어 저장하고, 전자해도 기반 AIS 정보를 디스플레이하는 시스템 구현을 통해 설계의 결과를 확인했다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.498-501
• /
• 2004

A new slab design using secant stiffness, Direct Inelastic Slab Design, was developed. Since basically the proposed design method uses linear analysis, it is convenient and stable in numerical analysis. At the same time, the proposed design method can accurately estimate the inelastic strength and ductility demands of slab because it can analyzes the inelastic behavior of structure using iterative calculations for secant stiffness. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. Design examples using the proposed method were presented, and compared with traditional nonlinear analysis, and experiments. The Direct Inelastic Slab Design, as an integrated analysis/design method, can directly address the design strategy intended by the engineer, such as moment strength and ductility limit. As a result, economical and safe design can be achieved.

• 한국터널지하공간학회 논문집
• /
• 제17권2호
• /
• pp.167-174
• /
• 2015

국토의 70%이상이 산악 지형인 우리나라에서는 지형적인 특성으로 터널 건설이 중요하며, 터널 건설의 증가로 안전한 터널 건설이 중요한 문제로 대두되고 있다. 최근, 도로의 고속화와 직선화로 인해 장대터널 건설이 증가하고 있다. 본 연구에서는 장대터널에서의 암반 블록의 수치 모델링을 이용한 터널 안전 시공법을 제안하고, 현장에서 관찰한 불연속면 정보를 근거로 하여 실제 장대터널에 적용했다. 실제 터널현장에 있어서, 암반 블록의 수치 모델링을 이용한 터널 안전 시공법을 위해서 새롭게 개발한 수치해석 프로그램을 사용하여 정확한 키블럭 추출이 가능한 것을 검증하였다. 사용하기 쉬운 사용자 인터페이스를 가지고 있는 본 컴퓨터 시뮬레이션 기법은 암반 블럭의 안정성 계산뿐만 아니라 추가 보강대책공의 설계도 가능하다.

• 한국정보통신학회논문지
• /
• 제19권8호
• /
• pp.1845-1852
• /
• 2015

바코드 시스템과 전자태그(RFID)부터 저 전력 블루투스 기술을 활용한 비콘(Beacon)까지 진료 및 검사 단계를 자동화하고 스마트 기기와 연계된 진료 정보를 이용하는 등 정보기술과 보건‧의료 분야의 용합이 널리 확산되고 있다. 본 논문에서는 환자에게 혈액을 수혈하는 과정에서 다른 혈액형이 수혈되는 사고를 예방하기 위해 안전한 수혈관리를 위한 모바일 헬스케어 시스템을 설계하고 구현하였다. 환자 팔찌, 채혈 용기, 혈액백 및 의료진 신분증의 바코드에 저장된 정보를 스마트 기기로 인식하여 환자의 정보와 매칭시켜 안전하고 효율적인 수혈이 가능하도록 구현하였다. 본 논문에서 제안하여 구현한 수혈관리 모바일 헬스케어 시스템을 종합병원의 수혈 과정에 적용한 결과, 안전하고 효율적인 수혈이 가능하여 수혈 과정에서 발생하는 사고의 예방이 가능한 것으로 확인되었다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.239-246
• /
• 2003

A new earthquake design method performing iterative calculations using secant stiffness was developed. The proposed design method has the advantages of convenience and stability in numerical analysis because it uses elastic analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it performs the analysis on the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. Design examples using the proposed method were presented, and its advantages were presented by the comparisons with existing design methods using elastic or inelastic analysis. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer, such as ductility limit on each member, the design concept of strong column - weak beam, and etc. Through iterative calculations on the structure preliminarily designed only with member sizing, the strength and ductility demands of each member can be directly calculated so as to satisfy the given design strategy As the result economical and safe design can be achieved.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.191-198
• /
• 2014

PURPOSES : Safety consciousness can be the first factor to hinder the acceptance of design alternative, which moderates the applied design criteria in order to adapt the road to the natural terrain condition. METHODS : The method which enables to check the safety of design alternative by using design consistency concept is suggested. The method is based on the linked or interactive analysis between terrain and road alignment. Real design example is considered as a guide how to apply the method and the analysis result is discussed with the future research. RESULTS : Suggested method can be used for designers as a tool to review their design outputs can be safe as much as the original design. So, designers have the more objective judgement on their designs and have the confidence on their designs. CONCLUSIONS : The method is expected to be used as a tool to see the safety consciousness in an objective view, so any possible conflicts between designers and design-related personnels caused by the terrain-oriented design can be solved.

• 한국해양공학회지
• /
• 제32권1호
• /
• pp.21-27
• /
• 2018

The design and analysis of a quayside mooring system for safe mooring of Prelude FLNG under extreme environmental conditions were carried out. The design of the mooring system considered the yard operation conditions and maximum wind speed during a typhoon. In order to secure the mooring safety of Prelude FLNG under an extreme environment, a special steel structure was designed between the quay and Prelude FLNG to maintain the distance from the quay to a certain extent to avoid a collision with the inclined base. The mooring safety was also ensured by installing additional new parts on the quay. A mooring analysis and mooring safety review were performed with more rigorous modeling considering the nonlinearity of the mooring rope and fender. In order to secure additional safety of the mooring system under extreme environmental conditions, a safety assessment was conducted on the failures of the mooring components proposed in the marine mooring guidelines. Based on the results of the mooring analysis, it was confirmed that the Prelude FLNG can be safely moored even under the extreme conditions of typhoons, and a worst case scenario analysis verified that the mooring system design was robust enough. The proposed mooring analysis and design method will provide a basis for the safe mooring of ultra-large floating offshore structures of similar size in the future.

• 한국실내디자인학회논문집
• /
• 제38호
• /
• pp.209-216
• /
• 2003

The purpose of this study is to develop furniture design for work space of Office based on the research of furniture design and the survey on the design of the office furniture. The office furniture Is designed in order to use the space flexibly and for the user design in the work space. The furniture type of solo worker on characteristic kinds of works should have a simple shape and it should be safe and easy to move because it has a structural function. The furniture in office should be designed in consideration of moveing line while working. The development of furniture in office which suit human body should be made in consideration of human factors and the study on furniture design in office. As above mentioned, to research and study on the furniture design of working furniture in office which reduces fatigue resulted from labor for office, human factors aspect should be considered, furthermore psychological, mental approach to Ideal solution should be made.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 가을 학술발표회 논문집
• /
• pp.384-387
• /
• 2003

A new Direct Nonlinear Strut-Tie Model design method performing iterative calculations using secant stiffness was developed. Since basically the proposed design method uses elastic analysis, it has the advantages of convenience and stability in numerical analysis. At the same time, the proposed design method can accurately estimate the strength and ductility demands on the members because it analyzes the inelastic behavior of structure using iterative calculation. In the present study, the procedure of the proposed design method was established, and a computer program incorporating the proposed method was developed. The proposed design method, as an integrated method of analysis and design, can address the earthquake design strategy devised by the engineer, such as ductility limit on each member. Through iterative calculations on the structure preliminary designed with member sizes, the strength and ductility demands of each member can be estimated so that they satisfy the given design strategy, and as the result economical and safe design is achieved.

• 한국구조물진단유지관리공학회 논문집
• /
• 제25권6호
• /
• pp.111-120
• /
• 2021

상업용 건축물에서 화재가 발생하는 경우에는 피난경로가 복잡하고 연기 및 화염의 진행방향이 재실자의 피난방향과 비슷하기 때문에 많은 인명피해가 발생하고 있다. 인명피해를 최소화하기 위해서는 건축물에 대한 성능기반 피난설계가 필수적으로 요구된다. 성능기반 피난설계를 건축물에 적용하기 위해서는 각 건축물에 대한 복잡한 화재 시뮬레이션을 필요로 하기 때문에 많은 인력과 시간이 소요된다. 이를 보완하기 위하여, 화재 시뮬레이션을 수행하지 않고도 합리적으로 피난허용시간을 도출할 수 있는 피난허용시간 예측 모델을 개발한다면 매우 유용하게 활용될 수 있을 것이다. 이 연구에서는 상업용 건축물에 대한 화재 시뮬레이션을 수행하여 온도와 가시거리, 온도와 유독가스 농도의 상관관계를 규명하였으며, 이에 대한 데이터베이스를 구축하였다. 또한, 이를 기반으로 피난허용시간을 예측할 수 있는 인공신경망(ANN) 모델을 개발하였다. 제안된 인공신경망 모델이 다른 상업용 건축물에도 적용될 수 있는지를 검토하기 위하여 다른 상업용 건축물에 대한 검증을 수행하였으며, 제안모델은 이 상업용 건축물의 화재 시 피난허용시간을 매우 우수한 정확도로 추정하는 것으로 나타났다.