• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.571-578
• /
• 1997

Recently, many general-purpose packages for fluid-structure interaction problems have been announced. However, they have a lot of limitations to model structures in the fluid-structure interaction problems reasonably. Utilizing general-purpose packages such as MSC/NASTRAN and SYSNOISE, in this paper, a method to slove the radiation scattering problems with some accuracy in the fluid-structure interaction problems was developed. Using a simple model, the results from the presented method here are compared with those from SYSNOISE. The result shows quite a good agreement between the two methods. The problems, which could not be solved by SYSNOISE, were tried to solve with the presented method and results were presented. It was proved that this method could be safely used to solve fluid-structure interaction problems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.861-864
• /
• 2006

In general, 4-pole parameter and three-point method are used for predicting transmission loss which is one of characteristics of Muffler using CAE tools. However, these mehtods show different results from experiment when the flow effects are presented in practical model. In this parer, to overcome these problems, both Fluent and.Sysnoise are used to analyze the performance of extended inlet/outlet muffler including flow effects with varying flow velocity at inlet of duct. Flow fields and quadrupole source is calculated by Fluent. And Sysnoise is used to analyze acoustic performances of muffler with quadrupole source data extracted from Fluent. Finally, the variation of transmission loss is estimated according to various inlet flow velocity.

• Journal of the KSME
• /
• v.44 no.1
• /
• pp.30-31
• /
• 2004

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.291-296
• /
• 2001

Recently, many methods are studied to analyze the noise of HDD and to reduce it. In this study, the simulation tool(SPATH) was developed to analyze a noise of HDD. The prediction technique of sound pressure level(SPL) of a given structural shape enables us to design a cover and a base with much less vibration and noise. In this paper, we measured the force of disk-spindle motor and predicted SPL from HDD by computational simulation. To get a SPL of HDD by computational simulation, modal analysis and forced vibration analysis were performed with ANSYS, and sound radiation was computed using SYSNOISE. The calculated results were compared with experimental results and a good agreement was obtained.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.22 no.2
• /
• pp.391-398
• /
• 1998

The intake noise, a major source of vehicle noises, has rapidly become a noticeable, and has been studied to reduce the level. Traditionally, the intake system has been developed through the road test and the experiment using a engine dynamo, namely, the trial and error process. This approach require very high cost and long time consuming to develop the system. In this study, the simulator which had a speaker in the cylinder head was presented. It was easy to analyze the acoustic characteristic of the intake system in laboratory environment. This study presented a improvement to reduce the level of the intake noise using the Transfer Matrix Method and NIT/SYSNOISE, FE analysis commercial software. It was to select optimum position of a resonator and verified by the simulator. This simulator can be used early in the design stage of development of the intake system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1366-1370
• /
• 2007

Predicting the noise radiated from vibrating structures is important in the automotive, aerospace, construction equipment, and defense industries. In this paper, a numerical implementation of the boundary element method in solving the Helmholtz integral equation for radiated noise prediction is presented. To predict the noise emitted by vibrating structure, the developed code can use the results from a structure analysis performed by a multi-purpose structural finite element code like ANSYS and directly measured data by non-contact vibration sensor like Laser Doppler Vibrometer. To verify the accuracy of developed code, two kinds of verification are perfomed. Firstly, the computer code used the harmonic analysis results of ANSYS in simple model and try to match with SYSNOISE. After matching with simulation results, the code compared with the result from SYSNOISE which used the velocity data from the LDV measurement with different number of points. The performance of the developed code for vibro-acoustic noise prediction is presented using the experimental results of the non-contact sensor

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.7
• /
• pp.21-30
• /
• 2001

The analysis system implementing a serial process from structural vibration to sound radiation has been developed using both the power flow finite element method (PFFEM) known as a new vibrational analysis technique in medium to high frequency ranges and the acoustic boundary element method (BEM) which is effective in analyzing the sound radiation problems. The vibration analysis for arbitrary shape structures composed of plates is performed, and using the vibration energy density obtained from this analysis as the velocity boundary conditions for an acoustic analysis, vibro-acoustic analysis has been processed. To verify the developed system, we select a simple structure model and compare the results of developed system with those of SYSNOISE, and also the developed system is applied for the vibro-acoustic analysis of various structures in shapes.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.3
• /
• pp.173-183
• /
• 2010

In this paper, acoustic transmission characteristics are theoretically considered on a cylindrical cavity system. The cylindrical cavity system is a simplified model of the acoustic cavity of King Seongdeok Divine Bell and it consists of a main cavity, a gap and an auxiliary cavity, Under a point sound source in the main cavity, acoustic frequency response property is determined and acoustic modes are analysed. The results are compared with those by the boundary element analysis using SYSNOISE. Using the proposed theoretical method, the effect of the auxiliary cavity and the gap on the resonance frequency and sound transmission characteristics is identified. Finally the best combination of the auxiliary cavity and gap is determined for the maximum transmission of the source frequency.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.103-106
• /
• 1998

본 논문은 상용 FEM-BEM 프로그램을 사용하여 점-조화 가진(harmonic point excitation)에 의한 자유지지 경계 조건을 갖는 원통 셸(cylindrical shell)의 방사 효율(radiation efficiency) 실험의 결과와 비교하였다. 우선 충격 해머 실험(impact hammer test)을 통한 모드 시험(modal testing)으로 원통 셸의 공진 주파수(natural frequency)와 모드 형상(mode shape)의 특징을 살펴보고 다음으로 점-조화 가진에 의한 원통 셸의 방사 효율을 SYSNOISE와 ANSYS로 해석해 보았다. 동시에 음향 세기 실험을 통한 방사 효율을 측정하여 전산 해석의 결과와 실험의 결과를 비교해 보았다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.185-188
• /
• 1998

본 연구에서는 256(16$\times$16)개의 마이크로폰 정방형 배열에 의한 음향 홀로그래피 시스템을 제작하고, FFT에 의한 음향 홀로그래피법 알고리즘을 이용한 음원 위치 추정에 관하여 기술한다. 본 연구에서 설계한 측정 시스템은 방사된 음들을 동시 수음함으로서 실시간 데이터 처리가 가능하다. 또한 환경 잡음이 존재하는 실음장에서도 계측시간을 단축함과 동시에 고분해능으로 안정하게 음원의 위치를 추정할 수 있다. 본 연구의 타당성을 검증하기 위해 SYSNOISE에 의한 음장해석과 음향 홀로그래피 알고리즘을 이용하여 마이크로폰 간격 및 측정면 크기, 측정거리의 최적 조건을 구한 후 실음장 측정 실험에 적용하였다. 수치 시뮬레이션과 무향실에서 실험 데이터에 의해 음원 위치를 추정한 결과 유사한 결과를 얻었다.