• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.12
• /
• pp.2145-2149
• /
• 2007

This paper deals with optimum design criteria to minimize the torque ripple of a concentrated winding Synchronous Reluctance Motor (SynRM) using Response Surface Methodology (RSM). The feasibility of using RSM with the finite element method (FEM) in practical engineering problem is investigated with computational examples and comparison between the fitted response and the results obtained from an analytical solution according to the design variables of stator and rotor in concentrated winding SynRM (6slot).

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.68-70
• /
• 2008

This paper proposes FNN based PI controller for high performance control of SynRM Drive. Traditional PI controller can't be obtained good performance because it has fixed gain. Therefore, in this paper, FNN based PI controller that gain of PI controller is tuned use FNN proposes. FNN based PI controller proposed in this paper can be obtained excellent performance more than traditional PI controller. Algorithm proposed in this paper make a analysis and prove valid.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.647-648
• /
• 2015

최근 최저효율제를 대비한 프리미엄급 고효율 전동기의 필요성이 대두됨에 따라 유도전동기를 대체할 수 있는 고효율 전동기로써 영구자석 매입형 동기 릴럭턴스 모터(PMA-SynRM)가 각광받고 있다. 하지만 모터의 속도와 토크를 제어하기 위해 회전자 속도와 위치 정보를 측정할 수 있는 센서가 필요하고, 이 때 센서 설치의 공간적 문제, 센서의 유지/보수 및 시스템의 추가 비용 발생 등 많은 문제점들이 발생한다. 따라서 센서를 제거하기 위한 센서리스 위치 및 속도 제어에 관한 연구가 폭 넓게 진행되고 있다. 하지만 모터를 운전함에 따라 저항이나 역기전력 상수, 인덕턴스 등의 제정수의 변동이 발생하게 되고 센서리스 제어 시 이러한 변동에 의해서 추정 속도 및 위치에 오차가 발생하게 된다. 본 논문에서는 이러한 오차의 보상을 위해 MRAS(Model Reference Adaptive System) 방식을 적용한 센서리스 제어를 제안한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.11
• /
• pp.28-33
• /
• 2009

Average torque of PMa-SynRM(Permanent Magnet-assisted Synchronous Reluctance Motor) is changed by magnet form inserted to the barrier. Because the magnet structure inserted to the barrier influences to the magnet-torque and reluctance torque. Therefore, this paper present a suitable permanent magnet form design for maximum torque when the magnet quantites are always fixed. And each motor characteristic such as average torque, torque ripple, cogging torque and back-EMF are analyzed by FEM(Finite Element Method) for optimal design.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.742-747
• /
• 1998

In the High-Speed range for salient type synchronous reluctance motors, the effect of iron loss can not be negligible. In this paper, the SynRM without cage is analyzed mathematically to model and the speed control system is examined by simulation. In order to control the revolution speed, a closed-loop control with vector control and decoupling control are applied to the high-speed SynRM drives. The speed control system is analyzed to investigate the desired speed characteristics of high SynRM by simulation.

• Proceedings of the KIPE Conference
• /
• 1998.10a
• /
• pp.758-762
• /
• 1998

Many harmonics components are contained within the stator currents of the high-speed synchronous reluctance motor, SynRM, with salient pole rotor. They cause the power factor of SynRM to get worse. In this paper, the mathematical model of SynRM is investigated, and SV_PWM control method is applied to reduce harmonics components in the stator current. Simulation results show the fast response of speed and the reduction of harmonics components at steady state.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.2
• /
• pp.69-75
• /
• 2006

This paper deals with the optimum design solution on reduction of torque ripple for a Synchronous Reluctance Motor with concentrated winding using response surface methodology. The coupled Finite Elements Analysis (FEA) & Preisach model have been used to evaluate the nonlinear solution. Comparisons are given with characteristics of a SynRM according to the stator winding, slot number, open width of slot, slot depth, teeth width variation in concentrated winding SynRM, respectively. This paper presents an optimization procedure using Response Surface Methodology (RSM) to determine design parameters for reducing torque ripple. RSM has been achieved to use the experimental design method in combination with finite Element Method (FEM) and well adapted to make analytical model for a complex problem considering a lot of interaction of design variables. Moreover, Sequential Quadratic Problem (SQP) method is used to solve the resulting of constrained nonlinear optimization problem.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.12
• /
• pp.623-627
• /
• 2006

This paper deals with the optimum rotor design solution on torque ripple reduction for a SynRM with concentrated winding using response surface methodology (RSM). The RSM has been achieved to use the experimental design method in combination with finite element method (FEM)and well adapted to make analytical model for a complex problem considering a lot of interaction of design variables. Comparisons are given with characteristics of a SynRM according to flux barrier number, flux barrier width variation, respectively.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.300-302
• /
• 1997

Synchronous Reluctance Motors(SynRM) with multiple flux barrier structures are considered in this paper. Since the stator of a SynRM is similar as that of an inductin motor, attention is focused here on the rotor structure. We have designed the parameter of SynRM and analyzed the characteristics of the electromagnetic energy conversion.

• Elastomers and Composites
• /
• v.4 no.1
• /
• pp.83-88
• /
• 1969

As a part of a series of previous studies, physical properties of various portions of a tire made of NR-Syn. R bloods were studied. 1. It was found, in general, most effective for tire tread when 50 parts of HAF black was blended with NR and Syn. R with a ratio of 70/30. 2. It was found that the use of SBR 1712 has an advantage in price, easy processing and physical properties than other synthetic rubber. 3. A technical compounding of various portions of a tire has to be determined for optimum cure conditions.