• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.530-532
• /
• 2005

Actually, it's very difficult to discriminate the transient on underground power cable system because of the reflected signal including many noises. Therefore, in this paper, a solution based on multiple scales correlation of the transient using SWT(Stationary Wavelet Transform) is presented. It's quick and straightforward. For applying all algorithms, we just use the signal captured in single end.

• 기계저널
• /
• 제31권4호
• /
• pp.356-363
• /
• 1991

선형 탄성 유한요소 응력해석과 평균응력 효과를 고려한 저주기 피로실험으로부터 결정된 피로 특성, 그리고 국부변형률 방법을 종합하여 외경에 흠이 존재하는 자긴가공된 두꺼운 압력 용기의 피로수명이 평가되었다. 직사각형의 매우 날카로운 흠에서의 응력집중계수는 타원형 홈에서의 응력집중계수의 약 두배의 값이 얻어졌으며, 고강도 압력용기강인 ASTM A723의 저주기 피 로거동에 대한 평균응력 영향은 Morrow 및 SWT 파라메타를 이용하여 충분히 고려되었다. 균열발생이 예상되는 위험한 부분인 홈의 뿌리부분에서의 국부적인 응력, 변형률이 계산되었으며 예측된 피로수명은 실험적으로 얻어진 수명과 비교했을 때 2에서 4배의 오차를 보이면서 일치 하는 결과를 얻었다.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2002년도 가을 학술발표논문집 Vol.29 No.2 (1)
• /
• pp.493-495
• /
• 2002

본 연구에서는 TCP Connection을 유지하는 Stepping Stone 형태의 공격을 역추적하기 위해 사용되는 패킷 워터마크를 검출하는 시스템의 구현에 대해서 기술하고 있다. 본 연구에서 사용한 패킷 워터마크는 Sleepy Watermark Tracing(SWT)에서 사용한 virtual null string 형태의 워터마크를 사용하였으며, 이러한 워터마크의 효율적인 탐지 및 분석하는 방법을 설계 구현하였다. 본 연구의 의의는 패킷 워터마크 검출 시스템의 실제 구현을 통하여 TCP Connection Traceback 형태의 침입자 역추적 시스템에 활용할 수 있다는 것이다.

• Advances in aircraft and spacecraft science
• /
• 제4권1호
• /
• pp.1-19
• /
• 2017

Fatigue life prediction of a multi-row countersunk riveted lap joint was performed numerically. The stress and strain conditions in a highly stressed substructure of the joint were analysed using a global/local finite element (FE) model coupling approach. After validation of the FE models using experimental strain measurements, the stress/strain condition in the local three-dimensional (3D) FE model was simulated under a fatigue loading condition. This local model involved multiple load cases with nonlinearity in material properties, geometric deformation, and contact boundary conditions. The resulting stresses and strains were used in the Smith-Watson-Topper (SWT) strain life equation to assess the fatigue "initiation life", defined as the life to a 0.5 mm deep crack. Effects of the rivet-hole clearance and rivet head deformation on the predicted fatigue life were identified, and good agreement in the fatigue life was obtained between the experimental and the numerical results. Further crack growth from a 0.5 mm crack to the first linkup of two adjacent cracks was evaluated using the NRC in-house tool, CanGROW. Good correlation in the fatigue life was also obtained between the experimental result and the crack growth analysis. The study shows that the selected methodology is promising for assessing the fatigue life for the lap joint, which is expected to improve research efficiency by reducing test quantity and cost.

• 한국어류학회지
• /
• 제8권1호
• /
• pp.49-55
• /
• 1996

무지개송어, Oncorhynchus mykiss 난황자어의 부상기 이전까지의 부화일수에 따른 전장(TL)성장식은 $TLt=2.7e^{-1.24{\cdot}e^{-0.11t}}(r^{2}=0.66)$, 전중(TW)성장식은 $TWt=1.8e^{-2.03{\cdot}e^{-0.11t}}(r^{2}=0.66)$, 체세포중량(SW)성장식은 $SWt=1.8e^{-5.41{\cdot}e^{-0.13t}}(r^{2}=0.83)$로 나타났다. 부화일수 경과에 따른 난황장, 난황고, 난황부피는 감소를 나타내는 직선식이였다. 전중-전장, 체세포중량-전장, 난황장-전장, 난황고-전장, 난황부피-전장, 난황중-전장, 난황중-전중, 난황중-난황고 및 난황중-난황장의 성장형질간의 상대성장식은 부화일 경과에 따라 난황홉수 경향을 반영하였다.

• 한국컴퓨터정보학회논문지
• /
• 제12권3호
• /
• pp.185-194
• /
• 2007

WiBro가 IEEE802.16e로 국제 표준화 되었다. 국내뿐만 아니라 세계에서도 휴대인터넷으로 WiBro 서비스를 시작하고 있다. 본 논문에서는 불법 공격자인 해커가 휴대인터넷 WiBro의 이동단말을 이용하여 자신의 위치추적을 피하기 위하여, 피해 시스템을 직접 공격하지 않고 우회 공격을 수행한다. 현재 인터넷망에서 침입 기술에 적극적인 보안을 위한 진보된 알고리즘을 응용하여 효과적인 역추적 기법 등을 연구한다. 공격자인 이동단말에 대한 역추적을 할 때, 실시간 네트워크 로그 감사기록을 이용하고, TCP/IP와 네트워크 기반에서는 Thumbprint Algorithm, Timing based Algorithm, TCP Sequence number 등을 이용한 알고리즘 및 SWT 기법 등을 이용한 역추적 기법 등을 설계하고, 역추적을 실시하였다. 또한 트래픽 폭주 공격에 대해 AS시스템을 이용한 네트워크 트래픽 관리와 통제 및 실시간으로 역추적을 하였다. 본 논문의 연구 결과는 유비쿼터스 환경에서의 WiBro 인터넷에서의 역추적을 실시하고 포렌식 자료를 확보하는데 이바지 할 수 있을 것이다.

• Smart Structures and Systems
• /
• 제30권1호
• /
• pp.75-88
• /
• 2022

Engineering structures in operation essentially belong to time-varying or nonlinear structures and the resultant response signals are usually non-stationary. For such time-varying structures, it is of great importance to extract time-dependent dynamic parameters from non-stationary response signals, which benefits structural health monitoring, safety assessment and vibration control. However, various traditional signal processing methods are unable to extract the embedded meaningful information. As a newly developed technique, variational mode decomposition (VMD) shows its superiority on signal decomposition, however, it still suffers two main problems. The foremost problem is that the number of modal components is required to be defined in advance. Another problem needs to be addressed is that VMD cannot effectively separate non-stationary signals composed of closely spaced or overlapped modes. As such, a new method named generalized adaptive variational modal decomposition (GAVMD) is proposed. In this new method, the number of component signals is adaptively estimated by an index of mean frequency, while the generalized demodulation algorithm is introduced to yield a generalized VMD that can decompose mode overlapped signals successfully. After that, synchrosqueezing wavelet transform (SWT) is applied to extract instantaneous frequencies (IFs) of the decomposed mono-component signals. To verify the validity and accuracy of the proposed method, three numerical examples and a steel cable with time-varying tension force are investigated. The results demonstrate that the proposed GAVMD method can decompose the multi-component signal with overlapped modes well and its combination with SWT enables a successful IF extraction of each individual component.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.111-113
• /
• 2005

In this paper a computer program has been developed using IT technologies for load flow analysis. The program is written in the Java language for the platform and operating system independence. The software technique, such as Standard Widget Toolkit (SWT), Graphical Editing Framework (GEF), and Java web start, are used for the program. The program also has Graphical User Interface (GUI) to enable users to construct power system displays through simple mouse clicks and map directly into visual power system elements on the screen. The input data of the elements of power system can be entered on the screen. The results of the program cail be checked on the screen.

• 대한기계학회논문집A
• /
• 제33권11호
• /
• pp.1225-1232
• /
• 2009

This study suggests a structural design process for the upper control arm installed at a vehicle. Static strength and durability are the most important responses in the structural design of a control arm. This study considers the static strength in the optimization process. The inertia relief method for FE analysis is utilized to simulate the static loading conditions. According to the classification of structural optimization, the structural design of a control arm is included in the category of shape optimization. In this study, the metamodel technique using the kriging method is adopted to obtain the minimum weight satisfying the strength constraint. Then, the final design is suggested by considering the durability criteria. The durability assessment is obtained by the index of fatigue durability called the SWT (Smith-Watson-Topper) index. The final optimum shape has been proposed by trial and error method.

• Journal of Magnetics
• /
• 제17권1호
• /
• pp.33-35
• /
• 2012

A magnetic brake system was fabricated for use with small wind turbines. The torque of the pivot did not change as the speed of revolution increased when the magnetic array disc was far from the salient of the aluminum housing, the torque abruptly increased as the magnetic array approached the salient of the aluminum housing. The torque increased as a quadratic function of the speed of revolution when the distance between the magnetic array and the datum point was 60 mm.