• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.135-135
• /
• 2011

지구온난화와 이상기후에 따라 최근 우리나라를 둘러싼 기후패턴의 변화가 가속화되고 있으며 한반도는 장마기간이 소강상태를 보이는 반면, 장마 후 국지성 집중호우가 증가하고 태풍이 내습하는 현상이 빈번해짐으로써 홍수에 대한 위험과 피해규모도 증가하고 있다. 특히 도시지역에서는 강우규모가 배수시스템의 용량을 초과하거나, 하천수위 상승으로 관로 내에 역류가 발생하는 등 우수 배제 기능을 제대로 수행하지 못할 경우 발생하는 지표침수로 인해 심각한 인명 및 재산피해가 발생하고 있다. 실제로 현재 홍수해석 및 홍수위험지도 작성시 내수시스템을 반영하지 않아 침수면적 및 범위의 오차가 존재하며 홍수위험지도 작성시 내수범람과 외수범람을 따로 고려하는 문제점이 있다. 따라서 도시 침수 해석시 내수시스템을 반영한 정확한 침수심 및 침수면적계산뿐만 아니라 이상기후에 대비한 복합적 요인으로 인한 침수해석이 필요하다. 따라서 본 연구에서는 하천해석을 위해 1차원 하천 해석 모형인 FLDWAV모형을 적용하고 가상의 제방 파제 시나리오를 통하여 외수범람 영향을 구하였으며, 배수시스템의 SWMM모형과 제내지에서 내수와 외수범람의 영향을 고려한 DEM기반의 2차원 범람해석을 연계한 Dual-Drainage모형에 대하여 외수범람 영향에 따른 흐름의 양상, 침수심, 침수위 등을 분석하였다. 개발한 모형에 대한 적용성을 검토하기 위하여 대구 신암5동 유역을 선정하였고 대상유역의 수치지도를 활용하여 정형 격자 20m 크기로 지형자료를 구성하였으며, 건물의 영향도 고려하기 위해 DEM에 건물자료를 합성하였다. 침수해석 결과 내수시스템의 영향을 고려하지 않을 때가 고려하였을 때 보다 Node(맨홀)에서의 재유입의 영향으로 인하여 최대 침수심이 더 높게 나왔으며 침수면적도 넓게 나타나는 것을 확인하였고, 기존의 홍수위험지도 작성시 외수침수와 내수침수를 구분하여 해석하였던 것을 본 연구에서 통합하여 외수범람의 영향을 고려한 통합침수해석을 실시하여 내수에서 발생할 수 있는 유출량과 내수시스템의 월류량 등에 대한 고려가 없는 외수침수만 해석시 보다 최대침수심이 더 높게 나타났으며 침수면적 또한 넓게 나타남을 알 수 있었다. 본 연구를 통해서 도시홍수, 돌발홍수 등의 발생시 정확한 도시 침수 해석이 가능하며 도시침수구역에 대한 적절한 예 경보 및 피난대책 수립에 활용될 수 있을 것으로 사료된다. 또한 국내의 홍수위험지도나 도시 침수해석과 연계하여 선행시간을 확보한 정확도 높은 홍수정보시스템 구축에 크게 기여할 것으로 판단된다.

• Journal of Korea Water Resources Association
• /
• v.51 no.4
• /
• pp.301-311
• /
• 2018

Recently, the flood inundation caused by heavy rainfall in urban area is increasing due to global warming. The variability of climate change is described in the IPCC 5th report (2014). The precipitation pattern and hydrological system is varied by climate change. Since the heavy rainfall surpassed the design capacity of the pipeline, it caused great damage in metropolitan cities such as Seoul and Busan. Inundation in urban area is primarily caused by insufficient sewer capacity and surplus overflow of river. Inundation in urban area with concentrated population is more dangerous than rural and mountains areas, because it is accompanied by human casualties as well as socio-economic damage to recover destruction of roads, brides and underground spaces. In addition, various factors such as an increase in impervious area, a short time of concentration to outlet, and a shortage of sewer capacity's lack increase flooding damage. In this study, flood inundation analysis was conducted for vulnerable areas using XP-SWMM. Also, three structural flood prevention measures such as drainage pipeline construction, detention reservoir construction, and flood pumping station construction are applied as flood damage prevention alternatives. The flood data for each alternative were extracted by dividing the basin by grid. The Spatial Compromise Programming are applied using flood assessment criteria, such as maximum inundation depth, inundation time, and construction cost. The purpose of this study is to reflect the preference of alternatives according to geographical condition even in the same watershed and to select flood defense alternative considering regional characteristics.

• Journal of Korea Water Resources Association
• /
• v.30 no.2
• /
• pp.177-191
• /
• 1997

The influences of the space allocation of design rainfall and partition of the subbasin on the characteristics of urban storm runoff was investigated for the 6 drainage basins by applying SWMM model. It show the deviation of -54.68∼18.77% in the peak discharge when we applied the composed JUFF quantiles to the two zones which are divided by upper and lower region of the basin. Then it is compared with the value for the case of using uniform rainfall distribution all over the drainage. Therefore, it would be helpful to decrease the flood risk when we adopt the space distribution of the design rainfall. The effects of the partitioning the drainage on the computing result shows various responses because of the surface characteristics of the each basin such as slope, imperviousness ratio, buy we can get closer result to the measured value as we make the subbasin detailed. If we use the concept of the skewness and area ratio when we determine the width of subbasin, we can improve the computed result even with fewer number of subbasins. We expect reasonable results which close into the measured results in the range of relative error, 25%, when we divide the basin into more than 3 subbasins and the total urban drainage area is less than 10$\textrm{km}^2$.

• Journal of Korea Water Resources Association
• /
• v.48 no.5
• /
• pp.345-355
• /
• 2015

Climate change impact on urban drainage system are analyzed in Seoul by using high-resolution climate change scenario comparing 2000s (1971~2000) with 2020s (2011~2040), 2050s (2041~2070) and 2080s (2071~2100). The historical hourly observed rainfall data were collected from KMA and the climate change scenario-based hourly rainfall data were produced by RegCM3 and Sub-BATS scheme in this study. The spatial resolution obtained from dynamic downscaling was $5{\times}5km$. The comparison of probability rainfalls between 2000s and 2080s showed that the change rates are ranged on 28~54%. In particular, the increase rates of probability rainfall were significant on 3, 6 and 24-hour rain durations. XP-SWMM model was used for analyzing the climate change impacts on urban drainage system. As the result, due to the increase of rainfall intensities, the inundated areas as a function of number of flooded manhole and overflow amounts were increasing rapidly for the 3 future periods in the selected Gongneung 1, Seocho 2, Sinrim 4 drainage systems. It can be concluded that the current drainage systems on the selected study area are vulnerable to climate change and require some reasonable climate change adaptation strategies.

• Journal of Korea Water Resources Association
• /
• v.40 no.11
• /
• pp.877-886
• /
• 2007

An urban drainage system consists of two major systems : flood drainage facilities and operating practices. The facilities are composed of sewer networks, gates, and pumping stations and the operating practice consists of pump or gate operation. Then, a real time simulation system which is able to simulate urban runoff and the pump operation and to consider the backwater effect is required to operate efficiently the pump. With this system, the efficient pump operating rule can be developed to diminish the possible flood damage on urban areas. In this study, a real time simulation system was developed using the SWMM 5.0 DLL and Visual Basic 6.0 equipped with EXCEL. Also, for developing efficient pump operating Rules, two new Rules were suggested. The first Rule is designed to operate pumps considering the condition of sewer networks such as depths of each junction. The second is to discharge all the amount of inflow at each time step. Results obtained by those Rules were compared with one by the current pump operating Rule which is able to consider only the depth of the retard basin. The developed model was applied to Joonggok retard basin and verified their applicability.

• Journal of Korea Water Resources Association
• /
• v.45 no.1
• /
• pp.65-73
• /
• 2012

Recently climate change and increase of surface runoff caused the urban flooding. Traditional way of dealing with urban flooding has been to increase the sewer capacity or construction of pumping stations, however, it is practically almost impossible because of time, money and traffic problems. Multipurpose DRMS (Decentralized Rainwater Management System) is a new paradigm proposed and recommended by NEMA (National Emergency Management Agency) for both flood control and water conservation. Suwon City has already enacted the ordinance on sound water cycle management by DRMS. In this study, a flood prone area in Suwon is selected and analysis of DRMS has been made using XP-SWMM for different scenarios of RT installation with same total rainwater tank volume and location. Installing one rainwater tank of 3,000$m^3$ can reduce the peak flow rate by 15.5%. Installing six rainwater tanks of 500$m^3$ volume in the area can reduce the peak flow rate by 28%. Three tanks which is concentrated in the middle region can reduce peak rate more than evenly distributed tanks. The method and results found from this study can be used for the design and performance prediction of DRMS at a flood prone area by supplementing the existing sewer system without increase of the sewer capacity.

• Journal of Korea Water Resources Association
• /
• v.41 no.5
• /
• pp.491-501
• /
• 2008

In order to describe runoff characteristics of urban drainage area, outflow from subbasins divided by considering topography and flow path, is analyzed through stormwater system. In doing so, concentration time and time-area curve change significantly according to basin shape, and runoff characteristics are changed greatly by these attributes. Therefore, in this development study of FFC2Q model by MLTM, we aim to improve the accuracy in analyzing runoff by adding a module that considers basin shape, giving it an advantage over popular urban hydrology models, such as SWMM and ILLUDAS, that can not account for geometric shape of a basin due to their assumptions of unit subbasin as having a simple rectangular form. For subbasin shapes, symmetry types (rectangular, ellipse, lozenge), divergent types (triangle, trapezoid), and convergent types (inverted triangle, inverted trapezoid) have been analyzed in application of time-area curve for surface runoff analysis. As a result, we found that runoff characteristic can be quite different depending on basin shape. For example, when Gunja basin was represented by lozenge shape, the best results for peak flow discharge and overall shape of runoff hydrograph were achieved in comparison to observed data. Additionally, in case of considering subbasin shape, the number of division of drainage basin did not affect peak flow magnitude and gave stable results close to observed data. However, in case of representing the shape of subbasins by traditional rectangular approximation, the division number had sensitive effects on the analysis results.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2009

Most developed models are designed to determine pipe diameter, slope and overall layout in order to minimize the cost for the design rainfall for the optimal sewer layout. However, these models are not capable of considering the superposition effect of runoff hydrographs in the sewer pipes. The flow characteristics in the sewer pipes, such as the sewer layout, pipe diameter and slope, vary according to the design of the sewer system. In particular, when the sewer network is modified, the shapes of the runoff hydrographs in the sewer pipes also change because of the superposition effect. In this study, the sewer layout is designed to control and distribute the flows in the sewer pipes, while considering the runoff superposition effect, in order to reduce the inundation risk at each junction. This is accomplished by separating the inflows that enter into each junction by changing the way in which pipes are connected between junctions. And this model combines SWMM (Storm Water Management Model) to perform the hydraulic analysis for the flows in the sewer network. The current sewer layout was modified to minimize the peak outflow at outlet in Garak basin, Seoul, South Korea. As the results, the peak outflows at the outlet were decreased by approximately 20% for the design rainfall during 30 minutes and the total overflows were also decreased for the excessive rainfalls.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.1
• /
• pp.74-89
• /
• 2015

The objective of this study is to present countermeasures for mitigation of flood damage with inundation analysis considering the effect of inland and river flood and prediction of flood inundation area, depth and time against emergencies caused by abnormal flood and local torrential rainfall. In this study, 2-D inundation analysis was fulfilled on the basis of river flood analysis applying to HEC-HMS and FLDWAV model and inundation analysis applying to SWMM model for the area of Shineum-dong, Gimcheon-si. Also expected inundation depth and area about probable rainfall of 100 and 200 years frequency were suggested. If expected inundation depth and flooding area is presented on the basis of this inundation analysis considering the effect of inland and river flood, it would be an important preliminary data to establish structural and nonstructural countermeasures for flood prevention. Also if flood risk map is prepared based on the result of inundation analysis, it would be useful to evacuate residents in high-risk area and regulate road and vehicle.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.640-640
• /
• 2015

2010년과 2011년 서울에서 발생한 집중호우와 2014년 부산에서 발생한 집중호우의 발생으로 막대한 재산상의 피해와 사상자를 냈다. 2010년 9월 21일에 발생한 집중호우는 1908년 관측시작이래 가장 많은 비가 내린 것으로 기록되었으며 주거지 4,727호, 상가 1,164호, 공장 126동 등이 침수되고 13시를 기준으로 강서지점의 경우 시간당 98.5mm의 기록적인 강우를 기록하였으나, 관악지점은 5.5mm에 그쳐 두 지점간의 시간당 강우량의 편차가 약 200배 가까이 차이가 나는 것으로 나타났다. 이와 같이 최근 도시지역에서 국지성 집중호우가 증가하고 있으며 지역별 강우 편차가 크고 이에 따라 침수피해발생 여부도 지역에 따라 달라진다. 강수의 공간적 분포와 그로 인한 침수해석은 도시돌발홍수 예경보 시스템에 있어 무엇보다도 중요하다. 본 연구의 목적은 도시지역 돌발홍수 예경보 시스템 구축을 위한 정량적 강수추정 QPE(Quantitative Precipitation Estimation)기법에 따른 수리 수문학적 영향을 평가하는 것이다. 정량적 강수추정을 위해 AWS, SKP, 레이더 자료를 활용하여 250m의 해상도를 가지도록 크리깅을 적용하였다: QPE 1은 34개의 AWS의 지점우량을 지구통계학적 기법 중의 하나인 크리깅을 이용하여 산정한 기법, QPE 2는 AWS와 156개의 SKP의 강우데이터를 크리깅을 이용하여 산정한 기법, QPE 3는 광덕산 레이더를 이용한 기법, QPE 4는 AWS, SKP, 광덕산 레이더 자료를 조건부 합성한 기법이다. 월류량을 산정하기 위해 도시유출해석모형인 SWMM을 강남역 일대를 대상으로 구축하고 우수관로 시스템으로 유입되지 못한 노면류(Surface flow)를 함께 고려하였다. 침수해석을 위해서는 DHM모델을 적용하였으며 2013년 7월 기간에 발생한 호우에 대하여 분석을 수행하였다. 비교수행을 위해서 인접한 서초 AWS와 강남 AWS의 지점강우량도 함께 고려하였으며 모의결과를 국가 재난관리 정보 시스템(NMDS)에 침수피해가 확인된 가옥 및 빌딩 정보와 일치여부를 적합도로 산정하였다. 산정된 적합도를 통하여 정량적 강수추정기법에 따른 수리?수문학적 영향을 평가하였다. 실제 침수흔적정보와 비교 결과, QPE 2와 QPE4가 가장 적합도가 높았으며 이에 따라 고밀도의 관측망의 구성이 도시지역 침수해석결과에도 적합할 것으로 판단된다.