• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.11-16
• /
• 2008

Purpose : The aim of this study was to predict radiation dose at 1 meter with BMI(body mass index) in thyroid cancer patients treated with radio-iodine and provide the efficient guideline in the management of patients. Methods : 140 patients from thyroidectomy for thyroid cancer were enrolled. All subjects under went 150 mCi radio-iodine therapy and performed whole body scan 1 week later. BMI(weight divided by square of height) was calculated to evaluate the amount of fatty tissue indirectly. The radiation dose at 1 meter was measured initially and on 2nd days. the relation of values with BMI were analyzed statically. As for the method of statistical analysis, using Med calc Version 9,2,2,0 Program. Results : (1) The initial effective dose was inversely correlated with the BMI. Significance level was 0.0004. (2) We obtained the following formula from the data of initial effective dose and BMI: Y = -30.91X + 350.4(${\mu}Sv/h$)(Y: initial radiation dose, x: Group). (3) After 21.55 hours, than radiation dose was less than those recommended by ICRP or NRC in 53% of the population. Conclusion : Using BMI, the initial radiation dose and 2nd days dose can be predicted in thyroid cancer patients before radio-iodine therapy. It may be used for predicting the time of discharge and control the isolation room. We were able to predict the radiation exposure after discharge using this calculated value.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.4
• /
• pp.218-225
• /
• 1992

This experiment was carried out to compare the varietal differences of winter hardiness based on the values of winter hardiness index(W1) and the dry weight of plant per relative tiller appearance rate (DWIRTAR), and the evaluate the method of measurements for winter hardiness in 17 orchardgrass varieties grown under mountainous area of Tackwalyon, Kangwon-do. Korea. The results were summarized as follows: 1. Seedling vigours(SV) of plant before wintering indicated highly significant negative correlation with the dry weight of 1st cutting(DW) and the dry weight of plant per relative tiller appearance rates (DWIRTAR). 2. The dry weight of 1st cutting(DW) indicated significant positive correlations with the number of tillers per plant(NT). dry weight of a tiller(WT), lield survival rate(SR). heading rate(HR) and the dry weight of heading tillers(HDW). 3. Correlation coefficients of the dry weight of 1st cutting(DW) with winter hardiness index(W1) was 0.499(p<0.05), and the dry weight of plant per relative tiller appearance rates(DW/RTAR) was 0.895(p<0.001), respectively. 4. Between the winter hardiness index(W1) and field survival rate(SR) showed highly significant positive correlation(p<0.001). And, the dry weight of plant per relative tiller appearance rates(DW/RTAR) showed highly significant positive correlation(p<0.001) with the dry weight of a tiller(WT) and the dry weight of heading tillers(HDW). 5. The varieties were classified into 2 groups by winter hardiness index(W1). The 13 varieties of Hallmark. lna, Rancho, Amba, Filippa, Sparta, Hokuto, Kitamidori, Okamidori, Wasemidori, Shinyo, Potomac and Summer-green belong to the group of W1)100, and 4 varieties of Able, Juno, Napier and Jesper belong to the group of WI(100, respectively. 6. And, also classified into 2 groups by the dry weight of plant per relative tiller appearance rates (DWIRTAR). The 4 varieties of Amba, Okamidori, Wasemidori and Summer-green belong to the group of DW1RTAR)l.O and 13 varieties of Able, Hallmark, Ina, Juno, Napier, Rancho, Filippa. Jesper, Sparta, Hokuto, Kitamidori, Shinyo and Potomac belong to the group of DW/RTAR(1.0, respectively. The variety with DW/RTAR)I.O is belong to the group of high potential winter hardiness, and also obtained a high values over the 100 of winter hardiness index(W1). 7. The dry weight of plant per relative tiller appearance rates(DW/RTAR) may be a very useful ecological character to evaluate the potential winter hardiness of orchardgrass varieties grown under mountainous area of Taekwalyon(altitudinal ranges about 800m).

• Journal of Animal Science and Technology
• /
• v.54 no.5
• /
• pp.369-373
• /
• 2012

AMP-activated protein kinase (AMPK) maintains energy homeostasis in skeletal muscle. Nonetheless, its functional role on protein synthesis with different nutrient availability has not been elucidated. Therefore, the purpose of this study is to examine the effect of AMPK activity on protein content in C2C12 myotubes incubated with low (5 mM; LG) or high (25 mM; HG) glucose media. LG stimulated (p<0.05) AMPK and acetyl CoA carboxylase (ACC) activity compare to those in HG group. Total protein content was higher in myotubes cultured with HG than in those cultured with LG and further increased by AICAR (5-amino-1-${\beta}$-D-ribofuranosyl-imidazole-4-carboxamide). Myotubes cultured with HG showed 7.5% lower UbFL (Ubiquitin Firefly Luciferase)-to-SV40 (Simian virus40) ratio compared to those in LG. Glucose level did not change the phosphorylation level of mammalian target of rapamycin (mTOR). Interestingly, administration of AICAR significantly increased phosphorylation level of mTOR in myotubes cultured with LG but not in those with HG. Overall, this data indicate that AMPK activity and protein turnover are finely regulated in response to different glucose concentration.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.4
• /
• pp.285-294
• /
• 2000

In order to determine the horizontal and vertical distributions of metals and prospect the recent metal pollution history in Nakdong Estuary, we took surface and core sediments. Maximum value of organic matter occurs at the upstream site located 4 km from Nakdong barrage, and the concentration of trace metals (Zn, Cu, and Pb etc.) decrease seaward in the estuary. The sedimentation rates, based on $^{210}$Pb$_{ex}$ and $^{137}$Cs activities, were 0.34 cm/yr in inside of barrage (core 1) and 0.25 cm/yr in Changrim (core 4). Sediment mixing layer does not exist in core 1, where anoxic condition is known to be prevail. The topmost sediment layer of core 4 (<3.5 cm) is severely mixed. At sites 1 and 4, concentrations of Cu slowly increased during the period of 1920-1970, rapidly increased during 1970-1990, and followed by slight decrease after 1990. Zn contents increased in early 1960s and peaked in 1993, and followed by decrease after 1990s. Pb has increased continuously since early 1970s. At the downstream of the barrage, Cu and Zn have increased in the topmost layer. The trend of increase of Cu is evident after 1950 (11 cm in sediment depth). Overall trend of heavy metal concentration clearly indicates the pollution has been increasing after the construction of the barrage.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.3
• /
• pp.149-158
• /
• 2024

Purpose: This study aims to investigate the effects of provisional restoration fabrication methods and surface polishing on surface roughness and microbial adhesion through in vitro experiments. Materials and Methods: 120 cylindrical provisional restoration resin blocks (10 × 10 × 2.5 mm) were manufactured according to four fabrication methods, and 30 specimens were assigned to each group. Afterwards, they were divided into non-polishing group, #400 grit SiC polishing group, and #800 grit SiC polishing group and polished to a 10 × 10 × 2 mm specimen size (n = 10). The surface roughness Ra and Ry of the specimen was measured using a Surface Roughness Tester. Three specimens were extracted from each group and were coated with artificial saliva, and then Streptococcus mutans were cultured on the specimens at 37℃ for 4 hours. The cultured specimens were fixed to fixatives and photographed using a scanning electron microscope. For statistical analysis, the two way of ANOVA was performed for surface roughness Ra and Ry, respectively, and the surface roughness was tested post-mortem with a Scheffe test. Results: The fabrication method and the degree of surface polishing of the provisional restorations had a significant effect on both surface roughness Ra and Ry, and had an interaction effect. There was no significant difference in Ra and Ry values in all polishing groups in DLP and LCD groups. Conclusion: The fabrication method and surface polishing of the provisional restoration had a significant effect on surface roughness and showed different adhesion patterns for S. mutans adhesion.

• Journal of radiological science and technology
• /
• v.38 no.2
• /
• pp.163-170
• /
• 2015

The interest of the people in the radioactive contamination of the water has increased significantly and the study about analysis and management of radioactive materials are being actively conducted. And monitoring spots have been expanded to the range of public water as well as drinking water by publishing the rule of drinking water quality standards and examination in the Environmental Enforcement Ordinance No. 553 of Korea. In this study, US EPA was investigated as the foreign advanced cases and the way that is appropriate for the Korea was sought by analyzing investigate radionuclide, interval and management. As a result, in the selection part of investigate radionuclide, geological survey, status of nuclear power plants and the presence of the use of artificial radionuclides of the Korea should be investigated and additionally after the selection of a few radionuclides, the systems should be extended to cover all possible radionuclides by considering radioactive pollution levels in humans may be exposed due to the annual drinking water. In the part of the investigate interval, the concept(MCL, DL) should be set up for preventing concentration detection of above MCL and it needs to the maintenance and management. For example, when the concentration is more than MCL, it should be investigated on a quarterly and when the concentration is lower than MCL, it should be investigated to each different interval and management. And the US EPA divided the management area and make the roadmap for managing drinking water. The each classified area has been organized to match the state budget and labor force and the individual data have been managed effectively by HPGe, the NaI, TLD and so on.

• Progress in Medical Physics
• /
• v.11 no.1
• /
• pp.59-71
• /
• 2000

It is possible to obtain a fast CT scan during breath holding with spiral technique. But the risk of radiation is increased due to detailed and repeated scans. However, the limitation of X-ray doses is not fully specified on CT, yet. Therefore, the purpose of the present study is to define the limitation of X-ray doses on CT The CT unit was somatom plus 4. Alderson Rando phantom, Solenoid water phantom, TLD, and reader were used. For determining adequate position and size of organs, the measurement of distance(${\pm}$2mm) from the midline of vertebral body was performed in 40 women(20~40 years). On the brain scan for 8:8(8mm slice thickness, 8mm/sec movement velocity of the table) and 10:10(10mm slice thickness, 10mm/sec movement velocity of the table) methods, the absorption doses of exposed area of the 10:10 were slightly higher than those of 8:8. The doses of unexposed uterus were negligible on the brain scan for both 8:8 and 10:10. On the chest scan for 8:8, 8:10(8mm slice thickness, 10mm/sec movement velocity of the table), 10:10, 10:12(10mm slice thickness, 12mm/sec movement velocity of the table) and 10:15(10mm slice thickness, 15mm/sec movement velocity of the table) methods, 8:8 method of the absorption doses of exposure area was the most highest and 10:15 method was the most lowest. The absorption doses of 8:10 method was relatively lower than those of the other methods. In conclusion, the 8:10 method is the most suitable to give a low radiation burden to patient without distorting image quality.

• Korean Journal of Poultry Science
• /
• v.28 no.2
• /
• pp.135-142
• /
• 2001

A novel sterategy has been established to determine the origin of the Primordial Germ Cells (PGCs) in avian embryos directly and the developmental fate of the PGCs for the application to Poultry biotechnology. Cells were removed from 1) the centre of area pellucida, 2) the outer of area pellucida and 3) the area opaca of the stage X blastoderm (Eyal-Giladi & Kochav, 1976). When the cells were removed from the centre of area pellucida, the mean number of circulating PGCs in blood was significantly decreased in the embryo at stage 15 (Hamburger & Hamilton, 1951) as compared to intact embryos. When the cells were replenished with donor cells, no reduction in the PGCs number was observed. The removal of cells at the outer of area pellucida or at the area opaca had no effect on the number of PGCs. In case, another set of the manipulated embryos were cultured ex vivo to the hatching and reared to the sexual maturity, the absence of germ cells and degeneration of seminiferous tubules was observed in resulting chickens derived from the blastoderm in which the cells were removed from the centre of the area pellucida. It was concluded that the avian Primordial Germ cells are originated at the center of area pellucida. Developmental ability of the cells to differentiate into somatic cells and germ cells in chimeras were analyzed. Somatic chimerism was detected as black feather attributed from donor cells. Molecular identification by use of female - specific DNA was performed. It was confirmed that the donor cells could be differentiated into chimeric body and erythrocytes. Donor cells retained the ability to differentiate into germline in chimeric gonads. More than 70% of the generated chimeras transmitted donor derived gametes to their offspring indicating that the cells at the center of area pellucida had the high ability to differentiate into germ cells. A molecular technique to identify germline chimerism has been developed by use of gene scan analysis. Strain specific DNA fragments were amplified by the method. It would be greatly contributed for the detection of germline chimerism. Mixed- sex chimeras which contained both male and female cells were produced to investigate the developmental fate of male and female cells in ovary and testes. The sex combinations of donor and recipient of the resulting chimeras were following 4 pairs; (1) chimeras (ZZ/ZZ) produced by a male donor (ZZ) and a male recipient (ZZ), (2) chimeras (ZW/ZW) produced by a female donor (ZW) and a female recipient (ZW), (3) chimeras (ZZ/ZW) Produce by a male donor (ZZ) and a female recipient (ZW), (4) chimeras (ZW/ZZ) produced by a female donor (ZW) and a male recipient (ZZ). It was found that genetically male avian germ cells could differentiate into functional ova and that genetically female germ cells can differentiate into functional spermatozoa in the gonad of the mixed- sex chimeras. An ability for introduction of exogenous DNA into the PGCs from stage X blastoderms were analyzed. Two reporter genes, SV-$\beta$gal and RSV-GFP, were introduced into the PGCs. Expression of bacterial/gal was improved by complexing DNA with liposome detectedcc in 75% of embryos at 3 days embryos. At the embryos incubated for 1 day, expression of the GFP was observed all the embryos. At day 3 of incubation, GFP was detected in about 70% of the manipulated embryos. In case of GFP, expression of the transgene was detected in 30 %e of the manipulated embryos. These results suggested that the cells is one of the most promising vectors for transgenesis. The established strategy should be very powerfull for application to poultry biotechnology.

• Parasites, Hosts and Diseases
• /
• v.27 no.3
• /
• pp.177-186
• /
• 1989

Observations were made on the differences in cell-mediated immune responses in the mice infected with strongly pathogenic Naegleria fewleyi ITMAP 359, weakly pathogenic Naegzeria jadini 0400, or non.pathogenic Naegleria gruberi EGB, respectively. Variations in cell-mediated responses and changes in antibody titers according to the duration after infection wore noted. Infections were done by dropping $5{\;}{\mu}l$ saline suspension containing $10{\times}10^4$ trophozoites cultured Bxenically in the CGVS medium into the right nasal cavity of ICR mice aging about 6~7 weeks, under the anesthesia by intraperitoneal injection of'secobarbital. Following infection, delayed type hypersensitivity(DTH) iesponses in the footpad and blastogenic responses of the mouse spleen cells using [$^3H$]-thymidine were observed on the day 1, 4, 7, 10 and 14 after infection. For the preparation of amoeba Iysates, each of cultured trophosoites were homogenized with an ultrasonicator, and centrifugated at 20,000 g. The supernatants of amoeba Iysates were used as the mitogen'and antigen for ELISA. Confanavalin A(Con. A) and lipopolysaccharide(LPS) were also used as mitogens in the blastogenic response. 1. The mice infected with N, fowleri showed the mortality rate of 75.7%. The rate was 6.2% for the N. jadini infected group, while no dead mouse was observed for N. gruberi infections. 2. In regard to DTH responses in the H. fewleri infected mice, the level increased in com- parison to the control group but declined after 7 days. An increase was also noted for the JV. jadini group after 1 day, but gradual decreases were observed through the infection period. In addition, no difference was noted between the N. gruberi infected and control groups. 3. Concerning the blastogenic response of the splenocytes, it increased after 10 days in the experimental group of N, fcwleri infection, but the differences ware not statistically significant compared with control group. It was evident that N. jadini group was not different from control group either, while there was a tendency of decrease in SV. gruberi infected group. In regard to the blastogenic response of the splenocytes by LPS, it was found that the N. fowlgri, N. jadini and N. gruberi infected groups had no differences from the control group. 4. The serum antibody titer of N. fcwleri and N. jadini infected mice increased from the day 7 and 14 after infection respectively, while the N. gruberi infected mice showed no increase. In summary of the results, it was observed that there were differences in the cell-mediated immune responses and serum antibody titers in the mice infected with strongly pathogenic JV. fowleri, weakly pathogenic N. jadini, or non.pathogenic N. gruberi, respectively.

• Nuclear Engineering and Technology
• /
• v.55 no.6
• /
• pp.2335-2347
• /
• 2023

As medical facilities are usually built at urban areas, special concrete aggregates and evaluation methods are needed to optimize the design of concrete walls by balancing density, thickness, material composition, cost, and other factors. Carbon treatment rooms require a high radiation shielding requirement, as the neutron yield from carbon therapy is much higher than the neutron yield of protons. In this case study, the maximum carbon energy is 430 MeV/u and the maximum current is 0.27 nA from a hybrid particle therapy system. Hospital or facility construction should consider this requirement to design a special heavy concrete. In this work, magnetite is adopted as the major aggregate. Density is determined mainly by the major aggregate content of magnetite, and a heavy concrete test block was constructed for structural tests. The compressive strength is 35.7 MPa. The density ranges from 3.65 g/cm³ to 4.14 g/cm³, and the iron mass content ranges from 53.78% to 60.38% from the 12 cored sample measurements. It was found that there is a linear relationship between density and iron content, and mixing impurities should be the major reason leading to the nonuniform element and density distribution. The effect of this nonuniformity on radiation shielding properties for a carbon treatment room is investigated by three groups of Monte Carlo simulations. Higher density dominates to reduce shielding thickness. However, a higher content of high-Z elements will weaken the shielding strength, especially at a lower dose rate threshold and vice versa. The weakened side effect of a high iron content on the shielding property is obvious at 2.5 µSv=h. Therefore, we should not blindly pursue high Z content in engineering. If the thickness is constrained to 2 m, then the density can be reduced to 3.3 g/cm³, which will save cost by reducing the magnetite composition with 50.44% iron content. If a higher density of 3.9 g/cm³ with 57.65% iron content is selected for construction, then the thickness of the wall can be reduced to 174.2 cm, which will save space for equipment installation.