• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.917-922
• /
• 2007

Electromagnetic suspension, the suspension system used for Maglev trains, is now being applied to urban and inter-city transportation systems, offering environmental benefits. This suspension system is actively controlled to stabilize the suspended vehicle as it runs over an elevated guideway, which, for various reasons, may have deviations in its height. For this reason, frequency responses of the suspension to height deviations must be predicted in the system design cycle. The equations of motion of the electromagnetic suspension employing the 5 state feedback control law are derived for frequency analysis. The results of this paper could be used to determine design requirements for the urban Maglev transportation system currently under development in Korea.

• 한국수학사학회지
• /
• 제20권4호
• /
• pp.93-104
• /
• 2007

현수교는 기둥 설치가 용이하지 않은 환경에 적용할 수 있는 혁신적인 교량 건설 방법으로 사람들의 관심을 끌어왔다. 그러나 Tocoma Narrows Bridge의 붕괴이후 안전상의 문제가 제기되었으며, 많은 비용이 지불되는 교량 건설에 시행착오를 줄이고자 현수교 방정식에 대한 연구가 시행되었다. 이 논문에서는 다양한 현수교 방정식의 모델을 정리하여 현수교 방정식의 차후 연구 방향을 제시하고자 한다.

• KSTLE International Journal
• /
• 제3권1호
• /
• pp.23-25
• /
• 2002

The electrorheological (ER) behavior of amino coated chitosan phosphate suspension in silicone oil is investigated. Amino coated chitosan phosphate suspension shows a typical ER response (Bingham flow behavior) upon application of an electric field due to the polarizability of phosphoryl polar group. The shear stress for the suspension exhibits a linear dependence on an electric field power of 1.94. The values of structure factors $A_s$obtains 2 far mine coated chitosan phosphate suspension and it may be due to the formation of multiple chains upon application of the electric field. Throughtout the experimental results, amino coated chitosan phosphate suspension shows good dispersion stability and found to be an anhydrous ER fluid.

• 산업기술연구
• /
• 제19권
• /
• pp.31-42
• /
• 1999

This paper presents a method for evaluating the performance of a leaf spring suspension and an air spring suspension systems for trucks in terms of ride and handling. Leaf springs, which generally have non-linear progressive force-deflection characteristics, are modeled using beam and contact elements. The leaf spring analysis model shows good correlation with experimental results. Each component of an air spring suspension system, which is a single leaf, air spring, height control valve, compressor and linkages, is modeled appropriately. Non-linear characteristics of air spring are accounted for using the measured data, and pressure and volume relations for height control system is also considered. The wheel rate of the air suspension is taken lower but roll stiffness is taken higher than those of leaf springs to improve ride and handling performance, which is verified through driving simulations.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.23.2-23.2
• /
• 2010

Researches on the drying of particle/polymer suspensions receive attentions in technical applications such as manufacturing display and batteries. In this study, the effect of polymers on drying behavior of silica/poly(vinyl alcohol) suspension was investigated in terms of suspension stability and stress development during drying. The effect of polymer adsorption was studied by changing pH. More strongly flocculated suspension with lower pH became more dispersed and close-packed film after drying. Evaluation of potential energy allows us to suggest that the adsorbed polymers which bridge the particles introduce steric repulsion and lead flocculated suspension to dispersed film. When the effect of adsorption kinetics was studied by changing the mixing time, the adsorption amount, characteristic stress and dried film density showed a similar behavior in the form of with a single characteristic time. It implies that the drying process can be determined by simple characteristic equation with a single time constant.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.101-103
• /
• 2001

Suspension effect has been studied by using superconductor of BiPbSrCaCuO ceramics containing $Ag_{2}O$ It has been cleared that $Ag_{2}O$ acts as pinning center which plays an important role to the suspension effect. Magnetic repulsive force which affects a superconductor located in magnetic flux from toroidal magnet has been investigated. It has been concluded that the suspension effect arises from the interaction between the pinning effect and the diamagnetic effect.

• Tribology and Lubricants
• /
• 제25권3호
• /
• pp.176-181
• /
• 2009

Aminated polyacrylonitrile as the new organic disperse phases of the anhydrous ER fluid has been synthesized and ER effect of the suspension composed of aminated polyacrylonitrile in silicone oil investigated. The suspension showed a typical ER response (Bingham flow behavior) upon application of an electric field. The shear stress for the suspension exhibited the dependence with a factor equals to 1.6 power on theelectric field. The current density and the conductivity of the of aminated polyacrylonitrile suspension increase with the electric field intensity and moreover the conductivity of the suspension is about 8 order of magnitude higher than that of the silicone oil. On the basis of the the results, aminated polyacrylonitrile suspension showed the ER flow behavior upon application of the electric field due to the polarizability of the branched amine polar group of the aminated polyacrylonitrile particles.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.337-342
• /
• 2011

This paper presents the performance of a full vehicle MR suspension system at different tire pressure. The pressure of tire is related to tire stiffness, which is significantly affects the performance of suspension system. Therefore, in this research, the effectiveness of tire pressure on full vehicle MR suspension is evaluated. As a first step, the characteristic of tire with respect to pressure is experimentally tested and modeled. After that, the governing equation of MR damper and full vehicle MR suspension system are derived. The skyhook controller is implemented and the vibration control performance of full vehicle MR suspension is evaluated via simulation with respect to the tire pressure.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1994년도 추계학술대회 논문집
• /
• pp.938-944
• /
• 1994

Active damping has been shown to offer increased suspension performance in terms of vehicle isolation, suspension packaging, and road-tire contract force. Many semi-active damping strategies have been introduced to approximate the response of active damping with the modulation of passive damping parameters. This study investigates the characteristics of semi-active suspension control through the simulation of passive, skyhook active, and semi-active damping models. A quarter car model is studied with the conrolled damping replacing both passive and active damping. A new semi-active scheme is suggested to eliminate the abrupt changes in semi-active damping force. It is shown that the new strategy performs almost identically to the so called "force controlled" semi-active law without steep changes in damping force or body acceleration.eleration.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.7-13
• /
• 1998

This paper presents a new concept of a commercial vehicle seat suspension system. The proposed suspension system features an ER(electro-rheological)damper which can produce continuously tunable damping forces by control elecric fields. A dynamic model of the ER damper is first achieved by incorporating Bingham property of the ER fluid, followed by the formulation of governing equations of motion for the suspension system The effectiveness of the proposed ER seat suspension system is evaluated by investigating vibration with respect to sinusoidal inputs.