• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.6
• /
• pp.382-390
• /
• 2015

To simulate a complicated hydrodynamic phenomena in the surf zone, the SWASH model is used in Haeundae Beach. The SWASH model is well known as a model competing with the Boussinesq-type model in terms of near shore waves and wave-induced currents modelling. This study is aimed to the detailed analysis of seasonal waves and wave-induced current simulation in Haeundae Beach, where the representative seasonal wave conditions was obtained from hourly measured wave data in 2014 by Korea Hydrographic and Oceanographic Administration( KHOA). Incident wave conditions were given as irregular waves by JONSWAP spectrum. The calculated seasonal wave-induced current patterns were compared with the field observation data. In summer season, a dominant longshore current toward the east of the beach appears due to the effect of incident waves from the South and the bottom bathymetry, then some rip currents occurs at the central part of the beach. In the winter season, ESE incident waves generates a strong westward longshore currents. However, a weak eastward longshore currents appears at the restricted east side areas of the beach.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.4
• /
• pp.305-312
• /
• 1995

In general, the radiation stresses based on the linear wave theory are overestimated which result in the discrepancy between the computed results and laboratory data of mean water level in the surf zone. Oh (1995) estimated the mean water level by using Svendsen's radiation stress model (1984) and compared with the experimental data. In this study. the computed results showed good agreements with the experimental data in the case of small wave steepness. while the results were overestimated in the case of large wave steepness. In this paper. the dimensionless radiation stress proposed by Svendsen (1984) is expressed in terms of relative water depth at breaking point and deep water wave steepness. The computed results are compared with the results calculated by d linear wave theory, Stive's model (1984). Sawaragi et al's model (1984) based on the spectrum of breaking wave components. and published laboratory data. The computed results of the modified Svendsen's model arc favourably compared with the laboratory data.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.217-225
• /
• 2004

Introduction of wave model, considered the effect of shoaling, refraction, diffraction, partial reflection, bottom friction, breaking at the coastal waters of complex bathymetry, is a very important factor for most coastal engineering design and disaster prevention problems. As waves move from deeper waters to shallow coastal waters, the fundamental wave parameters will change and the wave energy is redistributed along wave crests due to the depth variation, the presence of islands, coastal protection structures, irregularities of the enclosing shore boundaries, and other geological features. Moreover, waves undergo severe change inside the surf zone where wave breaking occurs and in the regions where reflected waves from coastline and structural boundaries interact with the incident waves. Therefore, the application of mild-slope equation model in this field would help for understanding of wave transformation mechanism where many other models could not deal with up to now. The purpose of this study is to form a extended mild-slope equation wave model and make comparison and analysis on variation of harbor responses in the vicinities of Ulsan Harbor and Ulsan New Port, etc. due to construction of New Port in Ulsan Bay. This type of trial might be a milestone for port development in macro scale, where the induced impact analysis in the existing port due to the development could be easily neglected.

• Ocean Systems Engineering
• /
• v.8 no.1
• /
• pp.1-20
• /
• 2018

The target area of the proposed study, Mamaia beach, is a narrow stretch of sand barrier island that sits between the Siutghiol Lake and the Black Sea. In the northern part of the bay, is located the Midia Port, where between 1966 and 1971 a long extension of 5 km of the offshore was built. Because of this extension, the natural flow of sediments has been significantly changed. Thus, the southern part of the Mamaia Bay had less sand nourishment which meant that the coast was eroding and to prevent it a protection of six dikes was built. After approximately forty years of coastal erosion, the south of the Mamaia Bay had in 2016 a new protection scheme, which includes first of all the beach nourishment and a new dike structure (groins scheme for protection) to protect it. From this perspective, the objective of the proposed study is to evaluate the effectiveness of the old Master plan against the new one by modeling the outcome of the two scenarios and to perform a comparison with a third one, in which the protection dikes do not exist and only the artificial nourishment has been done. In order to assess the wave processes and the current patterns along the shoreline, a complex computational framework has been applied in the target area. This joins the SWAN spectral phase averaged model with the 1D surf model. Furthermore, new UAV technology was also used to map out, chart and validate the numerical model outputs within the target zone for a better evaluation of the trends expected in the shoreline dynamics.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.91-107
• /
• 1995

In this paper, previously proposed mechanisms of generation and maintenance of rip currents are grouped into three broad categories; (1) prismatic topography models, (2) non-prismatic topography models and (3) structural controls by natural and/or constructed features, such as headlands, piers. groins, jetties. etc. The prismatic models can explain the occurrence of a rip current on a planar beach, while non-prismatic model needs undulatory topography inside the surf zone to generate and maintain a rip current. Yet more detailed and thorough studies need to be conducted to include all relevant variables and to clarify the mechanism(s) governing rip current. Next a simple model is presented to predict mean longshore currents behind a longshore bar (or submerged breakwaters) by considering mass transport over the bar and the bar morphology. This hydrodynamic model could be extended to include the sedimentary feedback mechanism.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.4
• /
• pp.296-308
• /
• 2001

A fully nonlinear Boussinesq equation of Wei et al. is finite differenced by Adams predictor-corrector method. A spatially distributed source function and sponge layers are used to reduce the reflected waves in the domain and wale breaking mechanism is included in the equation. The generated waves are found to be good and the corresponding wale heights are very close to the target values. The shoaling of solitary wave and transformation of regular wave over submerged shelf were simulated successfully. The characteristics of breaking mechanism was identified through the numerical experiment and the results of two dimensional wave propagation test over the spherical shoal showed the importance of nonlinear wave model.

• Advances in Automotive Engineering
• /
• v.1 no.1
• /
• pp.143-152
• /
• 2018

In this study an economical image stitching algorithm for use in automotive industry is developed for retrofittable panoramic image assistance applications. The aim of this project is to develop a driving assistance system known as Panoramic Parking Assistance (PPA) which is cheap, retrofittable and compatible for every type of automobiles. PPA generates bird's eye view image using cameras installed on the automobiles. Image stitching requires to get bird's eye view position of the vehicle. Panoramic images are wide area images that cannot be available by taking one shot, attained by stitching the overlapping areas. To achieve correct stitching many algorithms are used. This study includes some type of these algorithms and presents a simple one that is economical and practical. Firstly, the mathematical model of a wide view of angle camera is provided. Then distorted image correction is performed. Stitching is implemented by using the SIFT and SURF algorithms. It has been seen that using such algorithms requires complex image processing knowledge and implementation of high quality digital processors, which would be impracticle and costly for automobile use. Thus a simpler algorithm has been developed to decrase the complexity. The proposed algorithm uses one matching point for every couple of images and has ease of use and does not need high power processors. To show the efficiency, images coming from four distinct cameras are stitched by using the algorithm developed for the study and usability for automotive application is analyzed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.3
• /
• pp.163-169
• /
• 1991

Sixty seven regular wave tests were performed in a wave-current flume to investigate proper-ties of waves breaking on irregular slope profiles. In these tests, 1/10, 1/20 beach slopes were made using angles and plywoods. A little differences were found in such properties as breaker depth and height indices. runup for plane slopes comparing with other laboratory experiments. however. for smaller deepwater wave steepness, measured breaker height and depth data values were smaller than other formulas. On wave runup agreement was good between experiments and Hunt formula. however. measured data values were influenced by number of breaking. Significant differences were found in breaker depth index for plane and barred slopes. Wave height decay after breaking was found to be smaller than Dally et al.'s formula (1984).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.723-743
• /
• 2016

Indoor positioning is considered an enabler for a variety of applications, the demand for an indoor positioning service has also been accelerated. That is because that people spend most of their time indoor environment. Meanwhile, the smartphone integrated powerful camera is an efficient platform for navigation and positioning. However, for high accuracy indoor positioning by using a smartphone, there are two constraints that includes: (1) limited computational and memory resources of smartphone; (2) users' moving in large buildings. To address those issues, this paper uses the TC-OFDM for calculating the coarse positioning information includes horizontal and altitude information for assisting smartphone camera-based positioning. Moreover, a unified representation model of image features under variety of scenarios whose name is FAST-SURF is established for computing the fine location. Finally, an optimization marginalized particle filter is proposed for fusing the positioning information from TC-OFDM and images. The experimental result shows that the wide location detection accuracy is 0.823 m (1σ) at horizontal and 0.5 m at vertical. Comparing to the WiFi-based and ibeacon-based positioning methods, our method is powerful while being easy to be deployed and optimized.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.12-23
• /
• 1995

Currents driven by irregular waves are modelled using numerical model with various empirical relations improved. Kitaigorodskii's equilibrium equation is refined to account for shoaling effect and used for checking the breaking condition. In order to compute the bottom friction realistically. equivalent roughness blights are estimated considering the ripple shape and bed load transport which may be significant the surf zone. Two sets of equations are employed to evaluate the ripple shape: one is suggested by Nielsen and the other by Madsen and Rogengaus. Both equations give similar shape of ripples. but Madsen et al. give lower value of ripple factor than Swart suggesting that the equivalent roughness becomes relatively small. Optimization technique is used to determine the proper values for the empirical parameters of $\kappa$-ι equations, and the longshore current velocity is computed using the values of empirical parameters determined by the optimization technique.