• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.655-656
• /
• 2007

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.437-438
• /
• 2010

• 한국정밀공학회지
• /
• 제24권1호
• /
• pp.71-78
• /
• 2007

Abrasive jet machining (AJM) has been traditionally used for removing rusts or paints. Nowadays, this is promising technology for micro bulk machining where brittle substrate materials are used. In order to get accurate details, masks such as metal, polymer or elastomer is inevitable. Among them, photo polymer which is sensitive to the light has been attractive for it's high accuracy using photolithography. In this research, SU-8 as a photo polymer is used since it is adequate for making thick mask. So, this paper describes how to make AJM masks using SU-8 with a photolithography process, and investigates the characteristics of SU-8 masks during AJM process. Also, an example of fabrication using AJM was shown.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.43-44
• /
• 2005

SU-8 is a epoxy based photoresist designed for MEMS applications, where a thick, chemically and thermally stable image is desired. But SU-8 has proven to be very sensitive to variation in processing variables and hence difficult to use in the fabrication of useful structures. In this paper, negative SU-8 photoresist processed has been characterized in terms of delamination. Based on a full factorial designed experiment. Employing the design of experiment (DOE), a process parameter is established, and analyzing of full factional design is generated to investigate degree of delamination associated with three process parameters: post exposure bake (PEB) temperature, PEB time, and exposure energy. These results identify acceptable ranges of the three process variables to avoid delamination of SU-8 film, which in turn might lead to potential defects in MEMS device fabrication.

• Journal of information and communication convergence engineering
• /
• 제3권4호
• /
• pp.191-194
• /
• 2005

SU-8 is a epoxy based photoresist designed for MEMS applications, where a thick, chemically and thermally stable image are desired. However SU-8 has proven to be very sensitive to variation in processing variables and hence difficult to use in the fabrication of useful structures. In this paper, negative SU-8 photoresist processed has been characterized in terms of delamination, based on a full factorial designed experiment. Employing the design of experiment (DOE), a process parameter is established, and analyzing of full factorial design is generated to investigate degree of delamination associated with three process parameters: post exposure bake (PEB) temperature, PEB time, and exposure energy. These results identify acceptable ranges of the three process variables to avoid delamination of SU-8 film, which in turn might lead to potential defects in MEMS device fabrication.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1613-1616
• /
• 2007

A microgripper using thermal actuator and SU-8 polymer was designed and fabricated to manipulate cells and microparts. A chip size of a microgripper was 3 mm ${\times}$ 5 mm. The thermally actuated microgripper consisted of two couples of hot and cold arm actuators. The high thermal expansion coefficient, 52 $ppm/^{\circ}C$, of SU-8 compared to silicon and metals, allows the actuation of the microgripper. Thickness and width of SU-8 as an end-effector were 26 ${\mu}m$ and 80 ${\mu}m$, respectively. Initial gap between left jaw and right jaw was 120 ${\mu}m$. The ANSYS program as FEM tool was introduced to analyze the thermal distribution and displacement induced by thermal actuators. $XeF_2$ gas was used for isotropic silicon dry etching process to release SU-8 end-effector. Mechanical displacements of the fabricated microgripper were measured by optical microscopy in the range of input voltage from 0 V to 2.5 V. The maximum displacement between two jaws of a microgripper Type OG 1_1 was 22.4 ${\mu}m$ at 2.5 V.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2006년도 동계학술발표회 논문집
• /
• pp.329-330
• /
• 2006

• 대한전자공학회논문지SD
• /
• 제45권2호
• /
• pp.13-20
• /
• 2008

본 논문에서는 CMOS 이미지 센서의 웨이퍼 레벨 어셈블리를 위한 스페이스 제작 방법을 설명하였다. 스페이스 제작을 위해서 SU-8, PDMS, Si-interposer를 이용하는 세 가지 방법을 제안하였다. SU-8 스페이스에서는 균일한 두께 특성을 위해서 웨이퍼 회전 장치를 고안했으며, PDMS 스페이스에서는 glass/PDMS/glass 구조의 정렬 접합을 위해서 새로운 접합 방법을 제안하였다. Si-interposer를 이용한 스페이스 제작에서는 DRF을 이용한 접합 조건을 확립하였다. 세 가지의 실험 결과 Si-interposer를 이용한 스페이스 제작 시 glass/스페이스/glass 구조의 접합력이 가장 뛰어났으며, 접합력의 크기는 32.3MPa의 전단응력을 나타내었다.

• 한국정밀공학회지
• /
• 제25권1호
• /
• pp.130-137
• /
• 2008

Two-photon stereolithography (TPS) is recognized as a useful process for the fabrication of three-dimensional microstructures. Recently, the need for a two-photon curable resin with high strength increases as 3-D moicrostructures of high aspect ratio or large scale of several hundreds micrometers are required for applications of nano/micro devices in IT/BT. In this work, process parameters of TPS employing the SU-8 which is a representative two-photon curable resin with high strength have been studied for the precise fabrication of 3-D microstructures with high strength. The pre-baking and post-baking processes are studied and the parameter study of the SU-8 in TPS is conducted. Through this work, very small roughness of 12 nm and the minimum aspect ratio of ${\sim}1$ which provides a precise accumulation of layers could be obtained. Using the conditions studied in this work, some 3-D examples are fabricated.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 추계학술대회 논문집
• /
• pp.503-504
• /
• 2006