• Journal of the KSME
• /
• v.34 no.7
• /
• pp.517-526
• /
• 1994

복합재료가 점차 최근에 항공기에서 이차적인 구조요소에서 일차적으로 힘을 받는 구조물에 사 용됨으로써 두꺼운 복합재료 구조판과 셸의 정확한 동적, 정적거동을 예측하는 것이 중요한 문 제가 되었다. 특히 전산구조역학의 한 분야로서 복합재료 적층판의 문제는 inhomogeneity와 anisotropy 문제를 가지고 있어서 복잡하며 일차구조 (primary structrue)에서는 100장-200장의 적층도 드물지 않게 볼 수 있어서 정확한 계산을 위해서는 방대한 기억용량과 빠른 계산속도를 요구한다. 그러므로 복합재료 적층판의 거동을 정확하고 값싸고 빠르게 계산할 수 있는 이론과 수치방법의 개발이 중요한 문제이다. 이 문제는 E. Reissner, R. K. Kapania & S. Raciti, A. K. Noor & W. S., Burton, L. Librescu & J. N. Reddy, J. N. Reddy 등에 의해서 review가 행하 여졌고 이 분야의 모든 paper들의 비교적 현재까지 연구동향을 잘 묘사하고 있다. 여러 review paper들이 시간흐름상으로 여러 연구들을 잘 정리하고 있으므로 이 글에서는 논문들을 다시 review하는 것이 아니라 지난 20여 년간 이 분야에서 계속되어 온 연구중 주요한 것을 고찰하고 소개하는 것을 그 목적으로 한다.

• Journal of KSNVE
• /
• v.6 no.4
• /
• pp.447-456
• /
• 1996

Dynamic characteristics of the bell-type structure including acoustic effects and transient dynamic problems were analyzed numerically. Natural frequencies, mode shapes and transient dynamic analysis used the finite element method with 3-D general shell element. Mode shapes and stress distributions of transient dynamic analysis were expressed by computer graphics. The method using this study was evaluated by comparision of theoretical results at reference papers(14), (15) and the experimental test using Fast Fourier Transform analyzer. Vibrational modes governing acoustic characteristics of the typical bell-type structure depended on the first flexural mode(4-0 mode) and the second flexural mode(6-0 mode). Asymmetric effects by Dangiwas, acoustic holes gave rise to beat frequencies, and the Dangjwa was found to be most effective. When impact load acted on the bell, stress concentration occured at the rim part of bell. It was found that the bell type structure should be designed thickly at the rim part in order to prevent impact load from stress concentration.

• Proceedings of the KIEE Conference
• /
• 1996.07c
• /
• pp.1508-1511
• /
• 1996

In the fields of the optics, precise machine, semiconducting processing, the micro-positioning actuators are required for the control of position in submicron range. In this study, dielectric properties of 0.5PNN-(0.5-x)PZN-xPZT system ceramics with different PZT mole ratio were investigated. As the amount of PZT incerases, curie temperature was increased. The maximum of dielectric and piezoelectric constant was shown at 0.3 mole ratio of PZT amount. As a results, we have found that the structrue of ceramics with PZT 0.3 mole was morphotropic phase boundary.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.7 s.94
• /
• pp.1813-1822
• /
• 1993

An algorithm of fuzzy variable structrue control is proposed to design a closed loop fuel-injection system for the emission control of automotive gasoline engines. Fuzzy control is combined with sliding control at the switching boundary layer to improve the chattering of the stoichiometric air to fuel ratio. Multi-staged fuzzy rules are introduced to improve the adaptiveness of control system for the various operating conditions of engines, and a simplified technique of fuzzy inference is also adopted to improve the computational efficiency based on nonfuzzy micro-processors. The proposed method provides an effective way of engine controller design due to its hybrid structure satisfying the requirements of robustness and stability. The great potential of the fuzzy variable structure control is shown through a hardware-testing with an Intel 80C186 processor for controller and a typical engine-only model on an AD-100 computer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.9A
• /
• pp.2165-2172
• /
• 1998

Existing premises telecommucation wiring ad been installed for efficient telephone service. But premises wiring is currently ready to be reused as media for wideband digital services and Fiber-to-the-curb architecture. Electrical properties of premises wiring link have not characateized above frequencies for voice service. Accurte measurement of these characteristics are exssential for studies fof wideband ditital transmission system. On the other hand, the transmission qualities of premises wiring have been known to be worst in telecommunications access networks. So the knowledge of premises wiring sturucture as well as electrical properties is needed to improve the performance of premises wiring. In this paper, the structure of premises wiring is described in detail and electrical characteristics (characteristic impedance, SRL, attnuation, NEXT) about premises cables and stelecommucations link of representative apartment complex sare measured and naalyzed ove r16MHz range which is UTP Cat3 bandwidth.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.1
• /
• pp.52-57
• /
• 1987

In this paper, a methodology is developed to remove the reaching phase and the high frequency chattering phenomenon which are the common drawbacks of variable structrue control (VSC) system. A time varying switching surface is proposed to achieve sliding motion during the entire control process and a continuous control law whose terms are continuous functions inside a boundary layer neighbouring the time varying switching surface is developed to remove the high frequency chattering phenomenon of VSC. The methodology developed in this paper is applied to the 2'nd order time varying system and the simulated results are compared with those of typical VSC methodology.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.4
• /
• pp.601-606
• /
• 1994

This paper describes the effect of elongation on electrical properties and molecular structrue of high density polyethylene. Thin polyethylene films films obtained dy roll elongation after extruded at 220$^{\circ}C$ and elongated to draw rations of 16. Crystallinity of polyethylene films was measured by X-Ray diffraction and electrical properties were estimated by conductivity and TSC(Thermal Simulated Current). It was foung that the crystallinity increases and the electrical conductivity decreases as the elongation increases. The elongation dependence of electrical conductivity may be explained by the trap density. Thus, the control of polymer structure and crystallinity makes its properties better and can be applicated in order to get more active properties.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2651-2654
• /
• 2000

In this paper, we re-analyzed the fuzzy controller as conventional PID controller structure, and proposed a self tuning fuzzy PID controller whose input output scaling factors were tuned automatically. At first stage, the tuning parameters of fuzzy controller were determined by Ziegler-Nichols tuning method and then they were adjusted as the delay time and process environment were changed. Proposed controller was simple in its structrue and computational burden was small so that on line adaptation was easy to apply to. The result of computer simulation and practical experiment showed the proposed controller's excellent performance

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2308-2310
• /
• 2000

In adaptive fuzzy control, fuzzy systems are used to approximate the unknown plant nonlinearities. Until now, most of the papers in the field of controller design for nonlinear system using fuzzy systems considers the affine system with fixed grid-rule structure. This paper considers general nonlinear systems and dynamic fuzzy rule structure. Adaptive laws for fuzzy parameters and fuzzy rule structrue are established so that the whole system is stable in the sense of Lyapunov.

• Proceedings of the KIEE Conference
• /
• 1995.07b
• /
• pp.791-794
• /
• 1995

This paper introduces a new approach to adaptive control using a combination of direct, indirect and variable structrure method. A new variable structrue input is derived to counteract the effects of disturbances. Direct input is used to have fast response and indirect input improves the transient behavior of the system. Computer simulation results illustrate the very satisfactory performance of the proposed algorithm.