• Journal of radiological science and technology
• /
• v.33 no.2
• /
• pp.97-107
• /
• 2010

The objectives of this study is to figure out the unknown image processing methods of commercial CR system. We have implemented the processing curve of each Look up table(LUT) in REGIUS 150 CR system by using virtual digital test pattern method. The characteristic of Dry Imager was measured also. First of all, we have generated the virtual digital test pattern file with binary file editor. This file was used as an input data of CR system (REGIUS 150 CR system, KONICA MINOLTA). The DICOM files which were automatically generated output files by the CR system, were used to figure out the processing curves of each LUT modes (THX, ST, STM, LUM, BONE, LIN). The gradation curves of Dry Imager were also measured to figure out the characteristics of hard copy image. According to the results of each parameters, we identified the characteristics of image processing parameter in CR system. The processing curves which were measured by this proposed method showed the characteristics of CR system. And we found the linearity of Dry Imager in the middle area of processing curves. With these results, we found that the relationships between the curves and each parameters. The G value is related to the slope and the S value is related to the shift in x-axis of processing curves. In conclusion, the image processing method of the each commercial CR systems are different, and they are concealed. This proposed method which uses virtual digital test pattern can measure the characteristics of parameters for the image processing patterns in the CR system. We expect that the proposed method is useful to analogize the image processing means not only for this CR system, but also for the other commercial CR systems.

• The KIPS Transactions:PartC
• /
• v.13C no.1 s.104
• /
• pp.83-94
• /
• 2006

This paper describes ATM cell encipherment method using Rijndael Algorithm adopted as an AES(Advanced Encryption Standard) by NIST in 2001. ISO 9160 describes the requirement of physical layer data processing in encryption/decryption. For the description of ATM cell encipherment method, we implemented ATM data encipherment equipment which satisfies the requirements of ISO 9160, and verified the encipherment/decipherment processing at ATM STM-1 rate(155.52Mbps). The DES algorithm can process data in the block size of 64 bits and its key length is 64 bits, but the Rijndael algorithm can process data in the block size of 128 bits and the key length of 128, 192, or 256 bits selectively. So it is more flexible in high bit rate data processing and stronger in encription strength than DES. For tile real time encryption of high bit rate data stream. Rijndael algorithm was implemented in FPGA in this experiment. The boundary of serial UNI cell was detected by the CRC method, and in the case of user data cell the payload of 48 octets (384 bits) is converted in parallel and transferred to 3 Rijndael encipherment module in the block size of 128 bits individually. After completion of encryption, the header stored in buffer is attached to the enciphered payload and retransmitted in the format of cell. At the receiving end, the boundary of ceil is detected by the CRC method and the payload type is decided. n the payload type is the user data cell, the payload of the cell is transferred to the 3-Rijndael decryption module in the block sire of 128 bits for decryption of data. And in the case of maintenance cell, the payload is extracted without decryption processing.

• Journal of Plant Biotechnology
• /
• v.41 no.4
• /
• pp.180-193
• /
• 2014

In plants, a shoot apex has a small region known as the shoot apical meristem (SAM) having a group of dividing (initiating) cells. The SAM gives rise to all the groundabove structures of plants throughout their lifetime, and thus it plays important role in growth and development of plants. This review describes theories to explain the SAM organization and function developed over the last 250 years. Since in 1759 German botanist C. F. Wolff has described firstly the SAM, in 1858 Swiss botanist C. N${\ddot{a}}$geli proposed the apical cell theory from the observation of a large single apical cell in the SAM of seedless vascular plants: however, this view was recognized to be unsuitable to seed plants. In 1868, German botanist J. Hanstein suggested the histogen theory: this concept subdividing the SAM into dermatogen, periblem, and plerome was unable to generally apply to seed plants. In 1924, German botanist A. Schmidt proposed the tunica-corpus theory from the examination of angiosperm SAM in which two parts show different planes of cell division: this theory was proved to be not suitable to gymnosperm SAM, not have stable surface tunica layer. In 1938, American botanist A. Foster described zones in gymnosperm SAM based on the cytohistologic differentiation and thus called it a cytohistological zonation theory. With works by E. Gifford, in 1954, this zonation pattern was demonstrated to be also applicable to angiosperm SAM. As another theory, in 1952 French botanist R. Buvat proposed the m${\acute{e}}$rist${\grave{e}}$me d'attente (waiting meristem) theory: however, this concept was confuted because of its negation of function during vegetative growth phase to central initial cells. Rescent studies with Arabidopsis thaliana have found that formation and maintenance of the SAM are under the control of selected genes: SHOOTMERISTEMLESS (STM) gene forms the SAM, and WUSCHEL (WUS) and CLAVATA (CLV) genes function in maintaining the SAM; signaling between WUS and CLV genes act through a negative feedback loop.

• Journal of the Korean Vacuum Society
• /
• v.15 no.2
• /
• pp.152-161
• /
• 2006

In order to test the capacity of Si(5 5 12) as a potential template for nanowire fabrication, Bi/Si(5 5 12) system has been studied by STM. With Bi deposition, Si(5 5 12) has been transformed to Si(3 3 7) terrace. Initially Bi atoms selectively replace Si-dimers and Si-adatoms with Bi-dimers and Bi-adatoms, respectively. With extended Bi adsorption, Bi-dimers adsorb on the pre-adsorbed Bi-dimers and Bi-atoms. These dimers in the second layer form Bi-dimer pairs having relatively stable $p^3$ bonding, Finally, the Bi-dimer adsorbs on the Bi-dimers in the second layer and saturates. It can be deduced that both surface transformation to (3 3 7) and site-selective Bi adsorption are possible due to substrate-strain relaxation through inserting Bi atoms into subsurface of Si substrate.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.37-44
• /
• 2006

The homoepitaxy of Si(5 5 12) at $495^{\circ}C$ has been studied by Scanning Tunneling Microscopy under ultrahigh vacuum. A Si-dimer is the basic building-block and preferentially adsorbs on a unique site, that is, the Si-dimer/adatom site at the (337) and the (225) subsections within the Si(5 5 12) unit cell. The Si(5 5 12) unit cell is faceted to $3\times(337)$ subsections filled with Si-addimers and $1\times(113)$ subsection. In this step the tetramer at the other (337) section within the unit cell is transformed to a dimer/adatom site which can accept Si-dimers. Each (337) section is faceted to $1\times(112)\;and\;1\times(113)$, and then finally the unit cell of Si(5 5 12) is faceted to $3\tiems(112)\;and\;4\times(113)$ and forms the facet of effective height, $2.34{\AA}$. In this step, mutual transformation between the honeycomb chain and the dimer/adatom occurs. Finally, the valley between (112) and (113) facets is filled. If once the last step is completed, the uniform and planar Si(5 5 12) terrace is recovered. From the present study, therefore, it can be concluded that the homoepitaxy on Si(5 5 12) is periodically achieved and such growth mode is quite unique since faceting of the substrate-unit-cell plays a critical role for controlling uniformity of the overlayer.

• Reproductive and Developmental Biology
• /
• v.35 no.1
• /
• pp.55-60
• /
• 2011

The objective of this study was carried out to evaluate the efficiency of sperm collection methods on the post-thaw viability of cat semen. The cat semen was collected by artificial virginal (AV) and electronic ejaculate (EE) methods. The composition of semen extender was consisted of Tris-buffer supplemented with 20% egg yolk and 1% P/S antibiotics in Ext I, and more added 8% glycerol, 1.0% Equex STM paste of total volume in Ext II. The collected semen was adjusted the concentration and then diluted in Ext I for optimal concentration. The diluted semen was cooling to $5^{\circ}C$ temperature in refrigerator for at least 2 hrs and then diluted stepwise with Ext II for at least 1 hrs. After an equilibration for 1 hrs, the cooled semen was packaged in 0.5 ml straw and then freezing on the $LN_2$ vapor over 5 cm above from $LN_2$ and then immersed directly in $LN_2$ for cryopreservation. The frozen semen was thawed in $38^{\circ}C$ water for 15 sec and then evaluated the motility, viability, and morphology. Post-thaw semen were calculated the motility by SMI (sperm motility index). The live-dead sperm was evaluated by Eosin-B and morphological evaluation was by Diff-quik kit staining. The post-thaw concentration ($89{\times}10^6$ /ml vs. $128{\times}10^6$ /ml), viability ($22.6{\pm}10.6%$ vs. $37.1{\pm}26.1%$), morphological normality ($27.0{\pm}50.2%$ vs. $45.6{\pm}123.0%$) of EE and AV groups were not significant different, but the post-thaw motility was significant lower in EE than that in AV group ($53.1{\pm}3.6$ vs. $73.6{\pm}5.7$) (p<0.05). In conclusion, semen collection methods did not significant different between EE and AV groups except of post-thaw motility and so both semen collection methods could be applied in feline semen collection methods.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.1
• /
• pp.9-13
• /
• 2011

The purpose of this study was to investigate the effects of the secondary tasks such as sending text message (STM) and searching navigation (SN) on skin conductance level (SCL) and deviation of vehicle speed during driving. The participants included 30 healthy adults; 14 males aged $25.2{\pm}0.9$ with $1.9{\pm}1.8$ years of driving experiences and 16 females aged $22.6{\pm}1.9$ with $1.2{\pm}0.8$ years of driving experiences. All subjects were instructed to keep a constant speed (80km/h or 100km/h). SCL and deviation of vehicle speed were measured during driving only and driving with secondary tasks. SCL and deviation of vehicle speed were more increased during the driving with secondary tasks than driving only. Secondary tasks increased an activation of sympathetic nerve system and decreased driving performance. However, there were no significant differences in the SCL and deviation of vehicle speed according to gender and speed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.2
• /
• pp.9-15
• /
• 2012

The purpose of this study was to investigate the effects of the secondary tasks such as sending text message (STM) and searching navigation (SN) on skin conductance level (SCL) and driving performance of relatively aged and high-experienced drivers. The subjects included 26 taxi drivers; 12 males aged $56.3{\pm}4.4$ with $28.4{\pm}6.4$ years of driving experiences and 14 females aged $55.5{\pm}3.5$ with $19.4{\pm}5.0$ years of driving experiences. All subjects were instructed to keep a constant following distance (30m) from the car ahead and a given vehicle speed (80km/h or 100km/h) in a driving simulator. The relative change of SCL, vehicle velocity deviations, and average following distances were measured during driving only and driving with secondary tasks. The relative change of SCL, average following distance, and vehicle velocity deviation were more increased during the driving with secondary tasks than driving only. The relative change of SCL, vehicle velocity deviation, and average following distance were more affected by driving with 100km/hr than 80km/hr of a given vehicle speed. Secondary tasks increased a work load of drivers in term of SCL change, and decreased driving performance in terms of the vehicle velocity deviation and average following distance.

• Proceedings of the Korean Society of Embryo Transfer Conference
• /
• 2002.11a
• /
• pp.90-90
• /
• 2002

The purpose of this study was to investigate the effect of kind and combination of sugars on the viability and acrosome damage of post-thaw spermatozoa in canine. The extender used was Tris-citric acid extender (Tris-buffer) supplemented with 20% Egg-yolk, 8% glycerol, 1% Equex STM paste, and 70 mM sugars such as monosaccharide (fructose and xylose) and disaccharide(trehalose). To evaluate of sugar combination, the sugars supplemented in Tris-buffer were combined such as single (fructose, xylose, trehalose), two combinations (Fruc+Tre, Fruc+xyl, Tre+xyl) and three combinations (Fruc+Tre+Xyl). The concentration of sperm collected were adjusted of 50${\times}$10$\^$6/ per straw for freezing. The frozen spermatozoa were thawed at 37$^{\circ}C$ for 1 min and then analysis for CASA program in Livestock Improvement Main Center, NACF. The motility of post-thaw spermatozoa in Fruc+Tre was higher than those in fructose, trehalose, xylose, Fru+xyl, Tre+xyl and Fru+Tre+Xyl (79％ vs. 63, 66, 70, 71, 74 and 75%). The progressive motility after CASA analysis in Fuc+Tre group was also higher than those in fructose, trehalose, xylose, Fru+xyl, Tre+xyl and Fru+Tre+Xyl (67% vs. 53, 57, 60, 61, 62 and 64%). The acrosome damage of post-thaw spermatozoa stained was not significantly different among treatment groups such as fructose, trehalose, xylose, Fru+Tre, Fru+xyl, Tre+xyl and Freu+tre+xyl (17.7, 18.3, 28.0, 17.0, 19.7, 20.0 and 19.0%). The results indicated that the motility and progressive motility of post-thaw spermatozoa in Fru+Tre group was better, and acrosome normality was not different among all groups. The use of Tris-buffer supplemented with Fru+Tre as sugar for frezing of canine spermatosoa could be better and apply to semen banking and artificial insemination.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.187-187
• /
• 1999

fcc(110) 표면이나 bcc(110) 표면과 같이 2-fold 대칭성을 갖는 표면 위에 초미세 박막을 성장시킬 경우 토대표면의 두 방향에 대한 비 대칭성으로 흡착물이 비대칭적인 cluster 형태로 성장되는 것이 보고되고 있다. 최근 STM에 의한 Ps(110) 표면 위에나 Si(100) 또는 W(110) 표면 위에 성장 실험은 흡착물이 길게 늘어선 한 줄 형태의 성장 또는 가로 세로가 비대칭적인 cluster 형태로 성장되는 것을 보고하고 있고, 이러한 특정 형태의 성장의 원인으로 흡착 원자의 방향에 따른 분산 속도의 비대칭성, 인접 원자와의 비대칭적인 상호작용, 또는 cluster 경계 방향의 분산 속도 등을 들고 있다. 그러나 아직 대부분의 물질계에 비해 흡착원자의 분산속도 또는 분산 장벽에 대해서는 잘 알려져 있지 않다. 원하는 원자 단위 구조물 제작을 위해서는 흡착물의 분산속도에 대한 이해가 필수적이며, 본 연구는 KMC 시뮬레이션과 실험 결과를 비교하는 방법을 통하여 위치와 조건에 따른 각각의 분산 속도를 구하고자 하는 시도이다. 특히 비대칭적 토대 위에서의 나타나는 다양한 형태의 미시적 성장구조에 관심을 가지며, 연구 방법으로는 KMC 시뮬레이션을 이용한다. 미시적 성장 양식은 분산 장벽 형태에 의해 크게 결정된다. 분산장벽 중에서 성장에 비교적 큰 영향을 미치는 것으로는 테라스 위의 원자가 이동할 때의 분산장벽인 Ed, 계단 끝에 부착된 원자가 분리될 때의 장벽인 Ep, 그리고 위 테라스에서 계단 아래로 떨어져 내려갈 때 만나는 Schwoebel 장벽들이 있다. 먼저 대칭적인 fcc(100) 표면 위에서의 성장 구조를 정리해보면 분산 장벽에 따라 다양한 미시적 성장형태를 볼 수 있었다. 다층 성장의 경우도 그 양식은 sub-ML 성장과 동일한 형태를 가지므로 sub-ML 성장구조로 전체 성장 양식을 예견할 수 있다. 일반적인 경향은 Ep가 커질수록 fractal 성장형태가 되며, Ed가 적을수록 cluster 밀도가 작아지나, 같은 Ed+Ep에 대해서는 동일한 크기의 팔 넓이(수평 수직 방향 cluster 두께)를 가진다. 따라서 실험으로부터 얻은 cluster의 팔 넓이로부터 Ed+Ep 값을 결정할 수 있고, cluster 밀도와 fractal 차원으로부터 각각 Ed와 Ep값을 분리하여 얻을 수 있다. 또한 다층 성장에 대한 거칠기(roughness) 값으로부터 Es값도 구할 수 있다. 양방향 대칭성을 갖지 않은 fcc(110) 표면과 같은 경우, 형태는 다양하지만 동일한 방법으로 추정이 가능하다. (110) 표면의 경우 nearest neighbor 원자가 한 축으로 형성되고 따라서 이 축과 이것과 수직인 축에 대한 상호작용이나 분산 장벽 모두가 비대칭적이다. 따라서 분산 장벽도 x-축, y-축 방향에 따라 분리하여 Edx, E요, Epx, Epy 등과 같이 방향에 따라 다르게 고려해야 한다. 이러한 비대칭적인 분산 장벽을 고려하여 KMC 시뮬레이션을 수행하면 수평축과 수직축의 분산 장벽의 비에 따라 cluster의 두께비가 달라지는 성장을 볼 수 있었고, 한 축 방향으로의 팔 넓이는 fcc(100) 표면의 경우 동일한 Ed+Ep값에 대응하는 팔 넓이와 거의 동일한 결과가 나타나는 것을 볼 수 있다. 따라서 이러한 비대칭적인 모양을 가지는 성장의 경우도 cluster 밀도, cluster 모양, cluster의 양 축 방향 길이 비, 양 축 방향의 평균 팔 넓이로부터 각 축 방향의 분산 장벽을 얻어낼 수 있을 것으로 보인다.