• 한국컴퓨터정보학회논문지
• /
• 제28권12호
• /
• pp.105-114
• /
• 2023

본 논문은 모바일 IAB를 향한 UxNB 네트워크 배포 및 운영 방안을 제안한다. SDN(Software Defined Network) 기반으로 UxNB 네트워크를 운영하여, 이동 통신 서비스를 원하는 지역에 UxNB를 배포한다. 서비스 지역에 UxNB를 배포한 후, IAB를 설정하여 이동 통신 서비스를 수행할 수 있다. 이를 위해 본 논문에서는 먼저 UAV 컨트롤러(UAV controller)와 SDN 컨트롤러(SDN controller)로 구성되는 UxNB 네트워크 컨트롤러(UxNB NC; UxNB network controller)를 제안하고 필요한 기능들을 기술한다. 다음으로 UxNB 네트워크를 배포하고 운영할 수 있는 시나리오를 단계별로 상세하게 제시한다. 또한 UxNB 네트워크 컨트롤러의 위치, UxNB에 대한 UAV 컨트롤러 제어 명령 전달 방법, UxNB 네트워크를 위한 IAB 적용 방법, UxNB 네트워크의 최적화, UxNB 네트워크의 RLF(radio link failure) 복구 및 UxNB 네트워크의 보안(security)에 대한 향후 연구를 논한다. 제안한 UxNB NC 아키텍처와 UxNB 네트워크 배포 및 운영 방안을 이용하여 모바일 IAB에 UxNB 네트워크를 원활하게 통합할 수 있을 것으로 기대한다.

• 대한조선학회논문집
• /
• 제38권2호
• /
• pp.71-78
• /
• 2001

조선분야에서 CNC, 혹은 CAM이 사용되는 분야는 주로 강재 절단, 프로펠러 제작 자동화와 수조 실험용 모델제작에 관한 것이며 대학에서는 대부분 선형과 구조 설계용 CAD 연구를 수행하고 있고 CAM 분야는 활성화되어 있지 않은 편이다. 본 문에서는 Pro/Engineer CAD 시스템으로 3차원 선체 형상을 모델링 하고 이를 CNC 공작기계로 제작하는 과정을 수행하고 부수적으로 이기종 소프트웨어간 데이터 교환을 위한 중립 데이터 양식에 관한 기초 조사연구도 하였다. CIM 과정에서 소프트웨어간의 형상 정보 교환 시 IGES, STEP을 사용할 수 있으나 본 연구에 적용된 CAM s/w에서 STEP을 인식할 수 없어 IGES를 사용하였고 TRIMC VMC 공작기계의 제작물 크기에 제한이 있어 작은 규모의 선박 모형(prototype) 가공을 수행하였다.

• Coupled systems mechanics
• /
• 제11권3호
• /
• pp.267-284
• /
• 2022

Due to the high usage of ABS in industries, such as aerospace, auto, recreational devices, boat, submarines, etc., the purpose of this project was to find a way to weld this material, which gives advantages, such as affordable, high speed, and good connection quality. In this experimental project, the friction welding method was applied with parameters such as numerical control (NC) machine with two different speeds and three cross-sections, including a flat surface, cone, and step. After the end of the welding process, samples were then applied for both tensile and bending tests of materials, and the results showed that, with increasing the machining velocity Considering of samples, the friction of the surface increased and then caused to increase in the surface temperature. Considering mentioned contents, the melting temperature of composite materials increased. This can give a chance to have a better combination of Nanomaterial to base melted materials. Thus, the result showed that, with increasing the weight percentage (wt %) of Nanomaterials contents, and machining velocity, the mechanical behavior of welded area for all three types of samples were just increased. This enhancement is due to the better melting process on the welded area of different Nano contents; also, the results showed that the shape of the welding area could play a significant role, and by changing the shape, the results also changed drastically.A better shape for the welding process was dedicated to the step surface.

• 한국CDE학회논문집
• /
• 제10권4호
• /
• pp.254-261
• /
• 2005

The purpose of this research is to develop a method for cutting non-circular holes on a bent thick plate. Generally in order to cut the holes on the large plates, a special-purpose 5-axis machine is needed. However, such a machine is unavailable in most of the machine shops. This paper provides a description of such a method that utilizes a general-purpose 5-axis water-jet machine in place of the special-purpose machine: First, the bent piece is transformed into a flat plate, where the shape of the holes is reconstructed by considering deformation during bending. Then, after a 5-axis NC data is generated, the holes on the flat plate are cut using the 5-axis water-jet machine. The final step is to return to its, original shape by bending the plate with its newly-cut holes. The proposed methodology is implemented as a dedicated system by customizing a commercial CAD/CAM system. Some illustrations are provided throughout the paper in order to show the validity of the proposed methods and the developed system.

• 대한기계학회논문집
• /
• 제10권6호
• /
• pp.889-897
• /
• 1986

본 논문에서는 Koren의 알고리즘을 밀링에 적용하는 ACCCNC시스템을 제안 CNC 시스템에 AC 시스템을 적용할 때 생기는 변수예측과 또 스텝 및 테이퍼의 두 가지 형 상모델에 대한 변수들의 거동 및 그 때의 생산성을 알아보고 또 이 시스템을 밀링에 적용할 때의 이들 시스템의 적용 가능성을 AC-unit 제어실험(control test)을 통하여 그 타당성을 검토하여 실제 CNC 시스템에 AC 시스템을 적용할 수 있도록 하는 ACC-CNC 시스템의 설계기준을 설정하여 시스템의 최적설계의 기초적인 자료를 얻고자 한다.

• 산업공학
• /
• 제22권1호
• /
• pp.95-103
• /
• 2009

During the past few years, design of experiments (DOE) has been gaining acceptance in the telecommunications research community as a mean for designing and analyzing experiments economically and efficiently. In addition, the need for introducing a systematic robust design methodology (i.e., one of the most popular DOE methodologies) to network simulations has been increasing. In this paper, we present an architecture of voice over IP (VoIP) application and the E-Model for calculating the perceived quality of service (QoS). Then, we apply the Taguchi robust design methodology to optimize the perceived QoS of VoIP application, and describe the detailed step-by-step procedures. We have used ns-2 simulator to collect experimental data in which the SN ratio, a robustness measure, is analyzed to determine an optimal design condition. The analysis shows that "initial delay time in playout buffer" is a major control factor for ensuring robust behaviors of the perceived QoS of VoIP. Finally, we verify the proposed optimal design condition using a confirmation experiment.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.133-140
• /
• 2009

Presented in this paper is a method to generate round-endmill toolpaths for sculptured surfaces represented as a triangular mesh model. The proposed method is applicable in toolpath generation for ball-endmills and flat-endmills because the round-endmill is a generalized tool in three-axis NC (numerical control) milling. The method uses a wireframe model as the offset model that represents a cutter location surface. Since wireframe models are relatively simple and fast to calculate, the proposed method can process large models and keep high precision. Intersection points with the wireframe offset model and a tool guide plane are calculated, and intersection curves are constructed by tracing the intersection points. The final step of the method is extracting regular curves from the intersection curves including degenerate and self-intersected segments. The proposed method is implemented and tested, and a practical example is presented.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.117-126
• /
• 1994

This paper describes an application step of a $R^{-{\theta}}$ method which measures circular movements in machining centers. The detection of composite errors of circular movements and a high precision cutting method in machining centers were investigated by the analysis of data measured by $R^{\theta }$method which can detect the rotating angle and is applicable to variable measuring radius. When the error by squareness error and unbalance of position-loop-gain were mixed, the detection method of each error was proposed. Although the errors by squarenss error and backlash compensation were mixed, the errors by squareness error be detected. If the errors by unbalance of position-loop-gain and backlash compensation were mixed, the errors by unbalance of position-loop-gain could not detected. A high precision cutting mehod, which uses the NC program compensated by using feed-back data from error measured by the $R^{\theta }$method, was proposed.

• 한국CDE학회논문집
• /
• 제10권2호
• /
• pp.97-106
• /
• 2005

W3C has developed the RDF standard for utilizing ontology in Web applications. This paper presents extracting, storing, and applying ontology on product data. The design and tooling information included in STEP-NC files is focused as an example. By analyzing the relationship among the product data, the RDF schema is designed first. Based on the schema ontology if extracted and stored in XML files. As an application of the stored ontology, we can reconfigure the sitemap of product data repositories. In this example, the users can select the view that he or she is interested in (e.g. product, tool, person). With such various views of an product data repository, the users can access the specific data more effectively.

• 한국CDE학회논문집
• /
• 제6권4호
• /
• pp.263-270
• /
• 2001

In stamping-die manufacturing, the first step is to build die patterns for lost wax casting process. A recent industry trend is to manufacture the die pattern using 3-axis NC machining. This study identifies technical considerations of the pattern machining caused by the characteristics of Styrofoam material, and proposes technical methods related to establishing a process plan and generating tool paths for optimizing the pattern machining. In this paper, the process plan includes the fellowing three items: 1) deter-mining a global machining sequence-a sequence of profile, top, bottom machining and two set-ups, 2) extracting machining features from a pattern model and merging them, and 3) determining a machining sequence of machining features. To each machining feature, this study determines the machining start point, generates the approach tool path, and proposes a tool path linking method fur reducing the distance of the cutter rapid motion. Finally, a smooth tool path generation and an automatic feedrate adjustment (AFA) method are introduced far raising the machining efficiency.