• Journal of Electrical Engineering and Technology
• /
• v.6 no.2
• /
• pp.280-283
• /
• 2011

In the present work, a new approach is proposed for via interconnects of semiconductor devices, where multi-wall carbon nanotubes (MWCNTs) are used instead of conventional metals. In order to implement a selective growth of carbon nanotubes (CNTs) for via interconnect, the buried catalyst method is selected which is the most compatible with semiconductor processes. The cobalt catalyst for CNT growth is pre-deposited before via hole patterning, and to achieve the via etch stop on the thin catalyst layer (ca. 3nm), a novel 2-step etch scheme is designed; the first step is a conventional oxide etch while the second step chemically etches the silicon nitride layer to lower the damage of the catalyst layer. The results show that the 2-step etch scheme is a feasible candidate for the realization of CNT interconnects in conventional semiconductor devices.

• Journal of radiological science and technology
• /
• v.14 no.1
• /
• pp.45-48
• /
• 1991

Recently developed new step wedge has a small size as $10{\times}10\;cm^2$. It can use central beam, and is affected little by scattered rays emmitted from the neighboring step wedges. It's characteristics are same as the intensity scale method, and are excellent compared with conventional boot strap methods. Moreover, the method using new step wedge is simple in operation, and the characteristics are excellent. Now, the above method using new step wedge can supercede the distance method.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.132-140
• /
• 2006

In this paper, a new fault detection method for the extended Kalman filter, which uses a N-step predictor, is proposed. The N-step predictor performs the only time propagations for N-step intervals without measurement updates and its output is used as a monitoring signal for the fault detection. A consistency between the extended Kalman filter and the N-step predictor is tested to detect a fault. A test statistic is defined by the difference between the extended Kalman filter and the N-step predictor. The proposed method is applied to strapdown inertial navigation system (SDINS). By computer simulation, it is shown that the proposed method detects a fault effectively.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.258-260
• /
• 1995

This paper deals with the voltage unbalance of DC link voltage in series connected two 6-step inverters with double chopper preregulator. Each output of the 6-step inverter is connected to each transformer. The secondary windings of one of the transformers is zig-zag connected and the other star connected. The secondary terminals of the two transformers are series connected which makes 12-step output voltage waveform. In this case, the characteristics of the two transformers are rather different each other. The difference results in the voltage unbalance of the two 6-step inverter input capacitor voltages which make the DC link voltage. The degree of the voltage unbalance is analysied with the variations of load power, load power factor and % impedance of the transformer.

• Transactions of Materials Processing
• /
• v.16 no.4 s.94
• /
• pp.239-243
• /
• 2007

Superplastic forming/diffusion bonding(SPF/DB) has been widely used in the automotive and aerospace industry since it has great advantages to produce very light and strong components. Finite element method(FEM) is used to model the SPF/DB process of 3-sheet sandwich panel to predict the pressure-time curve and to analyze the process parameters. In order to eliminate defects of the part, a new pressurization scheme is proposed. Contrary to the conventional one-step pressurization, which causes the folding at the DB joint, two-step pressurization can eliminate the folding. Effect of pressurization cycle was investigated by using FE analysis and proper pressurization cycle is proposed.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.6
• /
• pp.412-420
• /
• 2005

The integration of CAD and CAM is critical for computer aided process planning. Recently, STEP has been emerged and utilized as a product data exchange standard format in CAD/CAM areas. The assembly information consists of assembly component relations, assembly features, assembly directions and mating conditions. The purpose of this study is to develop an efficient algorithm to extract assembly information directly from the STEP based files and to generate automatically assembly process plan from the extracted assembly features. The developed algorithms will generate assembly information codes for STEP(AICS). The results from this study can be a reasonable link between design and manufacturing for developing better CAAPP(Computer-Aided Assembly Process Planning) systems.

• Development and Reproduction
• /
• v.11 no.1
• /
• pp.31-41
• /
• 2007

The spermiogenesis of Crocidura shantungensis were studied by electron microscope. All process of spermiogenesis was divided into 11 phases 15 steps, based on the morphological features of the nucleus and cell organelles in cytoplasm of spermatids. The spermatids in Golgi and cap phases were a spherical shape. On the other hand, at the early acrosomal phase they changed into an oval shape, and the tail was created in this phase. In maturation phase, the shapes of spermatid head were thin and longish. Until step 7 the direction of spermatids head turned toward the lumen of the seminiferous tubule. From step 8 to step 15 their heads turned toward the basal lamina. In step 12, the nucleus and acrosome shown maximal elongation. From Step 13 the nucleus of spermatids became flat, simultaneously with flat expansion of the acrosome expanded, and the visible whole lengths of spermatids were tend to be shorten. Spermatid heading which arrived to step 14 was taken the final shape. The nucleus was doing the wedge shape, and the nuclear chromatins condensed completely and homogenized. In the spermiation phase, the spermatids were gradually disconnected from the cytoplasm of the Sertoli cell. In this phase, the acrosome of the spermatids were fully shorten and flat, and the spermatozoa completed the process of heading and the tailing. Considering all the results, the spermiogenesis may be useful information to analyze the differentiation of spermatogenic cells.

• Journal of Korea Water Resources Association
• /
• v.53 no.1
• /
• pp.29-43
• /
• 2020

The purpose of this study is to propose the design criteria and detailed design model by reviewing the issues related to geometry, formation process, destruction process, hydraulic function, restoration and ecological function of the step-pool from the existing research results, to apply the step-pool sequences to river restoration. Based on the analysis and review results, the design criteria for the structure and size of the step-pool are presented as ratio of the step spacing and the channel width, ratio of the unit step slope and channel slope, and ratio of step height and the particle size. To ensure structural stability of the step, stability analysis method of overturning based on the keystone theory was proposed as a design criterion. As a detailed design concept, a layout model was proposed by applying the imbricating structure of keystones and arch stones to the planar, longitudinal and transverse configurations of the step-pool.

• Structural Engineering and Mechanics
• /
• v.53 no.3
• /
• pp.537-573
• /
• 2015

Multiple-step beams carrying intermediate lumped masses with/without rotary inertias are widely used in engineering applications, but in the literature for free vibration analysis of such structural systems; Bernoulli-Euler Beam Theory (BEBT) without axial force effect is used. The literature regarding the free vibration analysis of Bernoulli-Euler single-span beams carrying a number of spring-mass systems, Bernoulli-Euler multiple-step and multi-span beams carrying multiple spring-mass systems and multiple point masses are plenty, but that of Timoshenko multiple-step beams carrying intermediate lumped masses and/or rotary inertias with axial force effect is fewer. The purpose of this paper is to utilize Numerical Assembly Technique (NAT) and Differential Transform Method (DTM) to determine the exact natural frequencies and mode shapes of the axial-loaded Timoshenko multiple-step beam carrying a number of intermediate lumped masses and/or rotary inertias. The model allows analyzing the influence of the shear and axial force effects, intermediate lumped masses and rotary inertias on the free vibration analysis of the multiple-step beams by using Timoshenko Beam Theory (TBT). At first, the coefficient matrices for the intermediate lumped mass with rotary inertia, the step change in cross-section, left-end support and right-end support of the multiple-step Timoshenko beam are derived from the analytical solution. After the derivation of the coefficient matrices, NAT is used to establish the overall coefficient matrix for the whole vibrating system. Finally, equating the overall coefficient matrix to zero one determines the natural frequencies of the vibrating system and substituting the corresponding values of integration constants into the related eigenfunctions one determines the associated mode shapes. After the analytical solution, an efficient and easy mathematical technique called DTM is used to solve the differential equations of the motion. The calculated natural frequencies of Timoshenko multiple-step beam carrying intermediate lumped masses and/or rotary inertias for the different values of axial force are given in tables. The first five mode shapes are presented in graphs. The effects of axial force, intermediate lumped masses and rotary inertias on the free vibration analysis of Timoshenko multiple-step beam are investigated.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.4
• /
• pp.31-38
• /
• 2006

The purpose of this study was to investigate the effect of changing the steps height on the joint moment of lower extremity in stair-descent activity of elderly persons. Data were collected by 3-D cinematography and force platform. 9 male elderly subjects in the 60s and 70s participated in this study. All subjects performed a stair-descent in four different heights of stairs (10, 14, 18, 22cm) having 5 step staircase. The results were as follows. 1. For the step height of 22cm the maximum. plantarflexion moment was the smallest and the largest for the step height of 14cm. 2. There was not a statistical difference shown for the extension moment of the knee joint for the different height of steps. 3. There was not a statistical difference shown for the flexion moment of the hip joint for the varying height of steps but on average for the 18cm step this increased rapidly. 4. The smallest maximum. value for inversion moment was revealed for the step height of 10cm and this increased significantly for the step height of 22cm. 5. The smallest maximum. value for abduction moment of the hip joint was revealed for the step height of 10cm and this increased significantly for the step height of 22cm. 6. There was no significant difference shown for the maximum. abduction moment for the hip joint. The main conclusion is that there is a huge difference in the moment of the lower extremities for the elderly while walking down a stairs with a step height above 18 cm and that this moment increased or decreased rapidly under a condition of step height being 22cm. With the results from this research and related research of elderly walking upstairs it can be shown that the step height has a large role in the safety for the elderly.