• Title/Summary/Keyword: STEP LENGTH

Search Result 1,041, Processing Time 0.027 seconds

Flexural Behavior of Segmental U-Girder and Composite U-Girder Using Ultra High Performance Concrete (초고강도 섬유보강 콘크리트를 사용한 분절형 U거더 및 합성 U거더의 휨거동)

  • Lee, Seung-Jae;Makhbal, Tsas-Orgilmaa;Kim, Sung-Tae;Han, Sang-Mook
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.5 no.3
    • /
    • pp.290-297
    • /
    • 2017
  • The flexural behavior tests of UHPC segmental U-girder and composite U-girder which has 160MPa compressive strength and 15.4m length were carried out. The test variables are volume fraction of steel fibers and slab over the U-girder. Each U-girder has longitudinal re-bars in web and lower flange. PS tendons which has 2 of 15.2mm diameter in upper flange and PS tendons which has 7 of 15.2mm diameter in lower flange were arranged and prestressed at onetime in U-girder connection stage. Enough strong prestressing force which applied to U-girder due to ultra high performance concrete strength can withstand the self weight and dead load in U-girder stage. By comparison with the brittle behavior of U-girder, composite U-girder showed the stable and ductile behavior. After the construction of slab over U-girder, flexural load capacity of composite U-girder can bear the design load in final construction stage with only one time prestressing operation which already carried out in U-girder stage. This simple prestressing method due to the ultra high strength concrete have the advantage in construction step and cost. The shear key which has narrow space has the strong composite connection between ultra high strength concrete U-girder and high strength concrete slab didn't show any slip and opening right before failure load.

High-$T_c$ 2nd-order SQUID Gradiometer for Use in Unshielded Environments (비차폐 환경에서의 고온초전도 SQUID 2차 미분기의 특성연구)

  • 박승문;강찬석;이순걸;유권규;김인선;박용기
    • Progress in Superconductivity
    • /
    • v.5 no.1
    • /
    • pp.50-54
    • /
    • 2003
  • We have fabricated $∂^2$$B_{z}$ /$∂x^2$ type planar gradiometers and studied their properties in operation under various field conditions. $YBa_2$$Cu_3$$O_{7}$ film was deposited on $SrTiO_3$ (100) substrate by a pulsed laser deposition (PLD) system and patterned into a device by the photolithography with ion milling technique. The device consists of 3 pickup loops designed symmetrically Inner dimension and the width of the square side loops are 3.6 mm and 1.2 mm, respectively, and the corresponding dimensions of the center loop are 2.0 mm and 1.13 mm. The length of baseline gradiometer is 5.8 mm. Step-edge junction width is 3.0 $\mu\textrm{m}$ and the hole size of the SQUID loop is 3 $\mu\textrm{m}$ ${\times}$ 52 $\mu\textrm{m}$. The SQUID inductance is estimated to be 35 pH. The device was formed on a 20 mm ${\times}$ 10 mm substrate. We have tested the behavior of the device in various field conditions. The unshielded gradiometer was stable under extremely hostile conditions on a laboratory bench. Noise level 0.45 pT/$\textrm{cm}^2$/(equation omitted)Hz and 0.84 pT/$\textrm{cm}^2$/(equation omitted)Hz at 1 Hz for the shielded and the unshielded cases, which correspond to equivalent field noises of 150 fT/(equation omitted)Hz and 280 fT/(equation omitted)Hz, respectively. In spite of the short baseline of 5.8 mm, the high common-mode-rejection-ratio of the gradiometer, $10^3$, allowed us to successfully record magnetocardiogram of a human subject, which demonstrates the feasibility of the design in biomagnetic studies.

  • PDF

Association between muscular strengths and gait characteristics of elderly people aged 65 to 74 and 75 and above (전·후기 노인의 근력과 보행 특성의 관계)

  • Back, Chang-Yei;Joo, Ji-Yong;Kim, Young-Kwan
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.2
    • /
    • pp.415-422
    • /
    • 2020
  • This study investigates the relationship between muscular strengths and gait characteristics of the elderly. Totally, 107 subjects, aged 65 to 85 years, participated in this study. Researchers measured muscle strengths (grip force, toe grip force, gluteus medius, and gluteus maximus forces) and walking characteristics (walking speed, cadence, step length, single leg support, and double legs support). Dynamometers and inertial measurement unit-based shoe systems were used for measuring muscular strength and gait characteristics, respectively. No significant difference was observed in strengths and walking characteristics between the young elders (YE, 65-74 years) and the old elders (OE, 75-85 years). For each age, muscular strength significantly correlated with some gait parameters. Forces of gluteus medius and gluteus maximus muscles showed better significant correlations between some gait parameters for all age groups, as compared to grip force and toe grip force. Regression coefficients between walking speed and grip force did not vary with age. We conclude that muscular strengths in OE better explained the gait characteristics than in YE subjects. Even though grip strength is an easily measured variable for senior fitness test, forces of gluteus medius and gluteus maximus muscles are more meaningful for understanding the walking characteristics of elderly people.

Characterization of TRAF4 mRNA and Functions related to tight junction in pig (돼지에서 TRAF4 유전자 특성 및 Tight junction 관련 기능 분석)

  • Yun, Jeong-hee;Hwang, In-Sul;Hwang, Seongsoo;Park, Mi-Ryung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.21 no.5
    • /
    • pp.216-222
    • /
    • 2020
  • Tumor necrosis factor receptor associated factor 4 (TRAF4) is found to be overexpressed in human breast cancer. It plays a role in cancer metastasis, production of reactive oxygen species, and cell polarity at membranes. The characteristics and functions of TRAF4 in pigs have not yet been identified. As the first step of research, the mRNA sequence of TRAF4 in porcine cells has been determined. To obtain the full-length sequence, rapid amplification of cDNA ends (RACE) has been carried out. Upon cloning, 2,030 bp of nucleotides were found to encode 470 amino acids, and 8 and 12 amino acids were different from those of the human and mouse TRAF4, respectively. The coding region of porcine TRAF4 was shown to be 93% and 90% homologous to human and mouse TRAF4, respectively. qPCR was conducted to determine the relative expression level of TRAF4. TRAF4 expression in pK15 was enhanced by cell-cell contacts. The mRNA levels of CLDN4, OCLN, and TJP1 at 60% and 80% confluency were significantly higher than at 40% confluency. Further, TRAF4 and tight junction-related genes were down-regulated upon treatment with TRAF4 siRNA. Thus, TRAF4 may affect the function of tight junctions in pig.

A Study on the Nursing Needs and Service Satisfactory of Users in the Post-Partum Care Center (산후조리원을 이용한 산모의 간호요구 및 만족도)

  • Jung, Hyun
    • Women's Health Nursing
    • /
    • v.5 no.2
    • /
    • pp.222-229
    • /
    • 1999
  • These days, as the society has been in the trends of highly industrialized and the family has been downsized, there is remarkably increasing number of women who follow occupation. These changes have made it more difficult for the family to help post-partum mother, which had been performed in side of house. By the help of social believe that during at least 1 month after childbirth professional nursing program is indispensable for both maternity protection and physical-mental recuperation, now many post-partum care centers for post-partum mother have been in operation. Although these post-partum care center have in use for a long time, no study was performed before this study on the same subject. Data were analyzed using by SAS. The results of study are as follow : 1. The general features of the user of the post-partum care center. The predominant band of user's age is extended from 26 to 30. The users are mainly housewives and they are in higher level of incomes and educations. As for the feature of delivery methods, they performed the normal spontaneous vaginal delivery method by 58.0% and the Caesarean operation method by 42.0%. As for the sexuality for babies, 59.3% of infants are male, and 40.7% are female. The highest delivery order of users is first and admission after 1-3days delivery is highest. 2. The results for the investigation into the actual condition of the post-partum care center are as follow : About the main reason for entrance of the post-partum care center was found to be the needs for the better nursing programs for recuperation after childbirth. This demands are also supported by their husbands. The average length of stay in the post-partum care center is 17.6 days and the besides promised expense ; powdered milk, milk-suckers, disposable dippers, skin cares, body shape cares, entrophics, injections. The post-partum have private rooms for mother and infants. Over the half of average expense is 229 million won. They are paying accessory fees the post-partum care center have similar step organization : the nurses, the skin carers, the cleaners. Mostly both ways of feeding powdered milk and breast feeding are in use, and mother's milk is preserved in the night time to be given to infant by nurse in charge. 3. The results of the investigation on users' nursing demand to the post-partum care center and satisfaction are as follow : The ranking order of nursing demand of mothers who used the is that ; infant care demands, environmental demands, emotional and mental care demands, education and training demands. As much as 70% of the respondents have dissatisfaction in nursing program, The ranking order of service satisfaction of mothers who used appears to be higher following order ; satisfaction in infant care demand, satisfaction in physical nursing demand, satisfaction in emotional and mental nursing demand, satisfaction in education and training demand, satisfaction in environment nursing demand. The results of pearson correlation. between nursing demand and service satisfaction of mothers who used are found to be relative noticeable in the level of 0.05. only infant care. The 61.7% of the women who used the post-partum care center. are responding that they will reuse the same post-partum care center again.

  • PDF

Purification, and Biochemical and Biophysical Characterization of Cellobiohydrolase I from Trichoderma harzianum IOC 3844

  • Colussi, Francieli;Serpa, Viviane;Da Silva Delabona, Priscila;Manzine, Livia Regina;Voltatodio, Maria Luiza;Alves, Renata;Mello, Bruno Luan;Nei, Pereira Jr.;Farinas, Cristiane Sanches;Golubev, Alexander M.;Santos, Maria Auxiliadora Morim;Polikarpov, Igor
    • Journal of Microbiology and Biotechnology
    • /
    • v.21 no.8
    • /
    • pp.808-817
    • /
    • 2011
  • Because of its elevated cellulolytic activity, the filamentous fungus Trichoderma harzianum has a considerable potential in biomass hydrolysis applications. Trichoderma harzianum cellobiohydrolase I (ThCBHI), an exoglucanase, is an important enzyme in the process of cellulose degradation. Here, we report an easy single-step ion-exchange chromatographic method for purification of ThCBHI and its initial biophysical and biochemical characterization. The ThCBHI produced by induction with microcrystalline cellulose under submerged fermentation was purified on DEAE-Sephadex A-50 media and its identity was confirmed by mass spectrometry. The ThCBHI biochemical characterization showed that the protein has a molecular mass of 66 kDa and pI of 5.23. As confirmed by smallangle X-ray scattering (SAXS), both full-length ThCBHI and its catalytic core domain (CCD) obtained by digestion with papain are monomeric in solution. Secondary structure analysis of ThCBHI by circular dichroism revealed ${\alpha}$- helices and ${\beta}$-strands contents in the 28% and 38% range, respectively. The intrinsic fluorescence emission maximum of 337 nm was accounted for as different degrees of exposure of ThCBHI tryptophan residues to water. Moreover, ThCBHI displayed maximum activity at pH 5.0 and temperature of $50^{\circ}C$ with specific activities against Avicel and p-nitrophenyl-${\beta}$-D-cellobioside of 1.25 U/mg and 1.53 U/mg, respectively.

Cubic zirconia single crystal growth using shell by skull melting method (스컬용융법에 의한 패각을 이용한 큐빅지르코니아 단결정 성장)

  • Jung, Jin-Hwa;Yon, Seog-Joo;Seok, Jeong-Won
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.23 no.3
    • /
    • pp.124-128
    • /
    • 2013
  • In this research, cubic zirconia is synthesized with a refined CaO from shells as a stabilizer through Skull melting method. The proper process time and concentration are defined by Hydration reaction to produce the refined CaO after two different treatments using 0.1 mol% of HCl respectively with Cockle shell. The highest purity of CaO is reached when the shell is immersed in 1 mol% HCl. In Hydration reaction step, the pure $Ca(OH)_2$ is produced at $45^{\circ}C$ for 24 hours. The highest purity of CaO is measured when the $Ca(OH)_2$ is treated by heat at $1200^{\circ}C$ for 5 hours. The single crystals are grown through Skull melting method by adding the different contents of the refined CaO from 10 mol% to 30 mol% into $ZrO_2$. The frequency of High-frequency oscillator used for Skull melting method is 3.4 MHz. The descending speed of the single crystal is 3 mm/hour. The grown length of the single crystal is 4 cm. As a result of this study, 15 mol% of CaO has the best crystallinity.

A3V 10b 33 MHz Low Power CMOS A/D Converter for HDTV Applications (HDTV 응용을 위한 3V 10b 33MHz 저전력 CMOS A/D 변환기)

  • Lee, Kang-Jin;Lee, Seung-Hoon
    • Journal of IKEEE
    • /
    • v.2 no.2 s.3
    • /
    • pp.278-284
    • /
    • 1998
  • This paper describes a l0b CMOS A/D converter (ADC) for HDTV applications. The proposed ADC adopts a typical multi-step pipelined architecture. The proposed circuit design techniques are as fo1lows: A selective channel-length adjustment technique for a bias circuit minimizes the mismatch of the bias current due to the short channel effect by supply voltage variations. A power reduction technique for a high-speed two-stage operational amplifier decreases the power consumption of amplifiers with wide bandwidths by turning on and off bias currents in the suggested sequence. A typical capacitor scaling technique optimizes the chip area and power dissipation of the ADC. The proposed ADC is designed and fabricated in s 0.8 um double-poly double-metal n-well CMOS technology. The measured differential and integral nonlinearities of the prototype ADC show less than ${\pm}0.6LSB\;and\;{\pm}2.0LSB$, respectively. The typical ADC power consumption is 119 mW at 3 V with a 40 MHz sampling rate, and 320 mW at 5 V with a 50 MHz sampling rate.

  • PDF

Clinical Study of the Floating-Sinking Pulse Quantification Analysis on Ages, Left/Right, and Palpation Positions (20/60대 여성을 중심으로 살펴본 좌우 촌관척 부/침맥 정량화 임상연구)

  • Kim, Jae-Uk;Kim, Sung-Hun;Jeon, Young-Ju;Ryu, Hyun-Hee;Lee, Yu-Jung;Lee, Hae-Jung;Kim, Jong-Yoel
    • Journal of Physiology & Pathology in Korean Medicine
    • /
    • v.23 no.5
    • /
    • pp.1193-1198
    • /
    • 2009
  • Pulse diagnosis is a central diagnosis method used in traditional Oriental medicine. To standardize and modernize the pulse diagnosis method, it is essential to develop an instrument-based reinterpretation of the clinically used pulse images in terms of the physical quantities such as the strength, period, width, length, and depth of the pulse. As a step towards such standardization, we conducted a clinical study on the floating/sinking pulses based on an automated palpation instrument (3D-MAC, Daeyo Medi, Korea) for 213 female subjects in their 20s and 174 female subjects in their 60s. The floating/sinking pulses are the two representative pulse images depending only on the depth of the pulse, and can be conveniently scaled by the coefficient of the floating-sinking pulse ($C_{fs}{\in}(0,1)$), which represents how strong one should apply the hold-down pressure to obtain the maximal pulse strength. As a result, primarily we found that it tends to appear more floating-like pulse ($C_{fs}{\rightarrow}0$) at Gwan and more sinking-like pulse ($C_{fs}{\rightarrow}1$) at Cheek, at both age groups and at both wrists. This result is consistent with a previous study on the geometrical structure of the blood vessel by an ultrasonograph. Second, the pulse tends to be more sinking-like in the age group of 60s than 20s. Finally, the pulses at the right palpation positions were found to be more sinking-like than the left, at both age groups.

Characteristics of the media under a self-propelled compost turner in button mushroom cultivation (양송이버섯 재배시 자주식 배지교반기 활용 배지의 특성 및 수량성)

  • Lee, Chan-Jung;Yu, Byeong-Kee;Park, Hye-sung;Lee, Eun-Ji;Min, Gyeong-Jin
    • Journal of Mushroom
    • /
    • v.18 no.3
    • /
    • pp.274-279
    • /
    • 2020
  • This study was conducted to investigate the characteristics of the medium used on the composting step, comparing the excavator agitator with the self-propelled turner. The temperature of the outdoor composting medium tended to increase rapidly after flipping in the turner. The late composting medium temperature was maintained at the excavator treatment area (farm practice), and the late composting effect progressed. During the field composting stage, various microorganisms such as Bacillus spp., Actinomycetes, fluorescent Pseudomonas spp., and filamentous fungi were distributed in the medium, and the density of aerobic bacteria involved in the decomposition of the medium was increased. Under high-temperature composting conditions, blue fungi, and mesophilic actinomycetes were inhibited or killed. Thermophilic actinomycetes, which play an important role in decomposing organic matter, showed higher densities than those observed in farm practices in the self-propelled turner process. The length of rice straw was slightly shorter when the self-propelled turner was used, and the water content did not show any significant difference between treatments. The a and b values tended to increase as the inverter was turned over. The CN ratio of the composting broth was lowered from 23.1 to 16.2 for the 5th turnover in the context of farming practices, and from 23.3 to 16.9 in the context of the self-propelled turner. The yield of each treatment was increased by 20% in 1 period, 28% in 2 periods, and 26% in 3 periods; the overall yield was 23%.