• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.5B
• /
• pp.313-320
• /
• 2012

A hybrid floating structure system combined with pontoon and semi-submersible type modules is proposed. This new system can reduce tensile forces of bottom slabs which could cause fatal damage of concrete floating structures. We performed a parametric study on the dimensions of this new system and investigate the sensitivity of the parameters to the behavior. In order to investigate various cases efficiently, we developed a simple two-step static analysis method for the fluid-structure interaction. An optimum system is derived from the investigation of the analysis results, weights and drafts of the hybrid structure. This study shows that introducing this new system to concrete floating structures is an effective way to reduce the tensile force of the bottm slab of such a floating structure. Also, it was found that when the length of the semi-submersible module is about 15%, the behavior would be optimal in the considered case.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.175-183
• /
• 2004

The most important element is a rise ratio when regarding beauty and economics of arch bridges. Only the effect of dead load has been considered to decide the rise ratio. In this study, when going over the rise ratio of arch bridges, examined the problems, that the determination of the rise ratio by the dead load has, by adding the factor of a determination of optimum rise ratio, which is not only the effect of the dead load that has been currently considered but also the problem with respect to dynamic stability that is now taken seriously. Synthetically, when deciding rise ratio that is investigated in basic step of design, it is necessary to consider the evaluation dynamic stability.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.3
• /
• pp.467-473
• /
• 2010

To improve the expression efficiency of recombinant endo-$\beta$-1,4-glucanase in P. pastoris, the endo-$\beta$-1,4-glucanase (egI) gene from Aspergillus niger was synthesized using optimized codons. Fourteen pairs of oligonucleotides with 15 bp overlap were designed and the full-length syn-egI gene was generated by two-step PCR-based DNA synthesis. In the synthesized endo-$\beta$-1,4-glucanase gene syn-egI, 193 nucleotides were changed, and the G+C content was decreased from 54% to 44.2%. The syn-egI gene was inserted into pPIC9K and transformed into P. pastoris GS115 by electroporation. The enzyme activity of recombinant P. pastoris stain 2-7# reached 20.3 U/ml with 1% barley $\beta$-glucan and 3.3 U/ml with 1% carboxymethylcellulose (CMC) as substrates in shake flasks versus 1,270.3 U/ml and 220.7 U/ml for the same substrates in 50-1 fermentors. The molecular mass of the recombinant protein was approximately 40 kDa as determined by SDS-PAGE analysis, the optimal temperature for recombinant enzyme activity was $70^{\circ}C$, and the optimal pH was 5.0 when CMC was used as the substrate.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.7
• /
• pp.79-88
• /
• 2006

In the present paper, the swirl flow structure and flame characteristics of turbulent premixed combustion in a model gas turbine combustor are investigated using large eddy simulation(LES). A G-equation flamelet model is employed to simulate the unsteady flame behavior. When inlet swirl number is increased, the distinct flow structures, such as the shapes of corner recirculation and center toroidal recirculation zone, are observed and the flame length is shorted gradually. Also, the phenomena of flashback are identified at strong swirl intensity. In order to get the accurate description of unsteady flame behavior, the predictive ability of the acoustic wave in a combustor is primarily evaluated. It is found that the vortex generated near the edge of step plays an important role in the flame fluctuation. Finally it is examined systematically that the flame and heat release fluctuation are coupled strongly to the vortex shedding generated by swirl flow and acoustic wave propagation from the analysis of flame-vortex interaction.

• Journal of Biomedical Engineering Research
• /
• v.41 no.3
• /
• pp.121-127
• /
• 2020

The purpose of this paper is to review the validation on the application of low frequency IMU(Inertial Measurement Unit) sensors by replacing high frequency motion analysis systems. Using an infrared-based 3D motion analysis system and IMU sensors (22 Hz) simultaneously, the gait cycle and knee flexion angle were measured. And the accuracy of each gait parameter was compared according to the statistical analysis method. The Bland-Altman plot analysis method was used to verify whether proper accuracy can be obtained when extracting gait parameters with low frequency sensors. As a result of the study, the use of the new gait assessment system was able to identify adequate accuracy in the measurement of cadence and stance phase. In addition, if the number of gait cycles is increased and the results of body anthropometric measurements are reflected in the gait analysis algorithm, is expected to improve accuracy in step length, walking speed, and range of motion measurements. The suggested gait assessment system is expected to make gait analysis more convenient. Furthermore, it will provide patients more accurate assessment and customized rehabilitation program through the quantitative data driven results.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.4
• /
• pp.1-8
• /
• 2007

The purpose of this study was to investigate the difference in the stride-to-stride variability between two treadmill conditions; traditional treadmill and special treadmill whose speed can be adjusted automatically by subject's walking speed. Eight male subjects (25.1 years, 172.7 cm, 66.6 kg) were participated in treadmill walking experiment. First, preferred walking speed (PWS) of each subject was determined. Second, each subject performed walking experiment with fixed PWS condition and with free PWS condition for 10 minutes. 3D motion capture system (Motion analysis Corp., USA) with 6 cameras was used to collect motion data with sampling frequency of 120Hz. Temporal and spatial variables for stride-to-stride variability were calculated. Coefficient of variance (CV) which quantifies the amount of variability and Detrended Fluctuation Analysis (DFA) which explains the structure (self-similarity) of the variability were used for analysis. Results showed that the amount of variability during free PWS condition was greater than that of fixed PWS condition. DFA results showed that there was a statistical difference between two treadmill conditions for the variables of step length, stance time, and double support time. From these results, it is possible that traditional treadmill study might give incorrect conclusion about gait variability study. Further study is necessary to clarify these matters by considering the number of subjects, experimental time, and gait variables for the study of stride-to-stride variability.

• The Plant Pathology Journal
• /
• v.20 no.1
• /
• pp.46-51
• /
• 2004

Host resistance is usually parasite-specific and is restricted to a particular pathogen races, and commonly is expressed against specific pathogen genotypes. In contrast, resistance shown by an entire plant species to a species of pathogen is known as non-host resistance. Therefore, non-host resistance is the more common and broad form of disease resistance exhibited by plants. As a first step to understand the mechanism of non-host plant defense, expressed sequence tags (EST) were generated from a hot pepper leaf cDNA library constructed from combined leaves collected at different time points after inoculation with non-host soybean pustule pathogen (Xanthomonas axonopodis pv. Glycines; Xag). To increase gene diversity, ESTs were also generated from cDNA libraries constructed from anthers and flower buds. Among a total of 10,061 ESTs, 8,525 were of sufficient quality to analyze further. Clustering analysis revealed that 55 ％ of all ESTs (4685) occurred only once. BLASTX analysis revealed that 74％ of the ESTs had significant sequence similarity to known proteins present in the NCBI nr database. In addition, 1,265 ESTs were tentatively identified as being full-length cDNAs. Functional classification of the ESTs derived from pathogen-infected pepper leaves revealed that about 25％ were disease- or defense-related genes. Furthermore, 323 (7％) ESTs were tentatively identified as being unique to hot pepper. This study represents the first analysis of sequence data from the hot pepper plant species. Although we focused on genes related to the plant defense response, our data will be useful for future comparative studies.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.5
• /
• pp.475-482
• /
• 2014

The precision hydraulic valve is widely used in various industrial field like aircraft, automobile, and general machinery. Servo actuator is the most important device for driving the precise hydraulic valve. The reliable operation of servo actuator effects on the overall hydraulic system. The performance of servo actuator relies on frequency response and step response according to arbitrary input signal. In this paper, we performed the analysis for the components of servo actuator to satisfy the reliable operation and response characteristics through the reliability analysis, and also induced the design parameters to realize the reliable operation and fast response characteristics of servo actuator for hydraulic valve operation through the empirical knowledge of experts and electromagnetic theories. We suggested the design equations to determine the values of design parameters of servo actuator as like bobbin size, length of yoke and plunger and turn number of coil, and verified the achieved design values through FEM analysis and performance tests using some prototypes of servo actuators adapted in hydraulic valve.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5385-5391
• /
• 2013

As on-line purchases is activated, customers' demand increases for the realistic and accurate digital information of a product design. In this paper, we propose a practical method that can generate a realistic 3D model of a real product using a 3D geometry obtained by a 3D scanner and its photographic images. In order to register images to the 3D geometry, the camera focal length, the CCD scanning aspect ratio and the transformation matrix between the camera coordinate and the 3D object coordinate must be determined. To perform this 2D-3D registration with consideration of computational complexity, a three-step method is applied, which consists of camera calibration, determination of a temporary optimum translation vector (TOTV) and nonlinear optimization for three rotational angles. A case study for a metallic coated industrial part, of which the colour appearance is hardly obtained by a 3D colour scanner has performed to demonstrate the effectiveness of the proposed method.

• The Journal of Korean Physical Therapy
• /
• v.16 no.3
• /
• pp.161-175
• /
• 2004

The purpose of this study was to determine the effect of HPAFO(Hinged Plastic Ankle Foot orthosis) and SPAFO(Solid Plastic Ankle Foot Orthosis) on standing balance and step moving in hemiplegia patients. Twenty hemiplegic patients were either inpatient or outpatient at the Rehabilitation medicine, MokPo J General Hospital and JeonJu J Medical Center from July 15, 2002 to September 15, 2002. Patients were able to ambulate independently for at least 10 meters and to stand independently for at least 10 minutes with balance measurement tool. The static balance and dynamic activity measurement was determined by SAKAI active balancer(Japan) with wearing HPAFO and wearing SPAFO. The static balance and dynamic activity analysis was analyzed by independent t-test. The results were as follows: 1. There were no significant difference in body weight bearing percent between wearing HPAFO and wearing SPAFO(p>0.05). 2. There were significant difference in whole path length between wearing HPAFO and wearing SPAFO(p<0.05). 3. There were significant difference in Effective Value Area between wearing HPAFO and wearing SPAFO(p>0.001). 4. There were significant difference in repeated functional time between wearing HPAFO and wearing SPAFO(p>0.001). 5. There were significant difference in cadence between wearing HPAFO and wearing SPAFO(p>0.001). The result of this study showed that wearing HPAFO and wearing SPAFO gave fair amount of improvement to static standing balance and dynamic movement ability of hemiplegic patients. The comparison result showed significant differences in between HPAFO and SPAHFO. The result of this study had a general limitation due to the restricted number of cases. The future study needs more detailed research and comparison with various variance between these two orthoses.