• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2423-2430
• /
• 2014

Nitrogen-doped short tubular carbons (N-STCs) with big inner diameter have been successfully synthesized via carbonization of polydopamine (PDA) wrapped halloysite nanotubes (HNTs). The obtained N-STCs have average length of $0.3{\mu}m$ with big inner diameter (50 nm), thin wall (2-3 nm) and large surface area ($776m^2g^{-1}$), and show excellent electrochemical properties. As an example in electrochemical applications, N-STCs were used to electrochemically detect hydrogen peroxide ($H_2O_2$) and glucose. The results showed that the N-STCs modified glassy carbon (N-STCs/GC) electrode had much better analytical performance (lower detection limit and wider linear range) compared to the acid-treated carbon nanotubes (AO-CNTs) based GC electrode. The unique structure endows N-STCs the enhanced electrochemical performance and promising applications in electrochemical sensing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.87-90
• /
• 2007

In cooperative communication systems, the source terminal transmits signal to the destination terminal with the aid of partner terminals. Therefore, the source terminal obtains extra spatial diversity gain. As a result, its performance is enhanced in term of higher achievable transmission rate, the larger coverage range, and the lower bit-error-rate (BER). Space-time codes (STCs) have been applied to cooperative communication systems in distributed fashion, in which the signal is spatially time exploited to obtain gains analogous to those provided by STCs. In this work, we consider the application of orthogonal Space-time Block Codes (OSTBCs) to the cooperative communication systems to further achieve higher diversity gain. The advances of the proposed approach are verified via computer simulations.

• Steel and Composite Structures
• /
• v.26 no.6
• /
• pp.771-791
• /
• 2018

This paper deals with the low velocity impact response and dynamic stresses of composite sandwich truncated conical shells (STCS) with compressible or incompressible core. Impacts are assumed to occur normally over the top face-sheet and the interaction between the impactor and the structure is simulated using a new equivalent three-degree-of-freedom (TDOF) spring-mass-damper (SMD) model. The displacement fields of core and face sheets are considered by higher order and first order shear deformation theory (FSDT), respectively. Considering continuity boundary conditions between the layers, the motion equations are derived based on Hamilton's principal incorporating the curvature, in-plane stress of the core and the structural damping effects based on Kelvin-Voigt model. In order to obtain the contact force, the displacement histories and the dynamic stresses, the differential quadrature method (DQM) is used. The effects of different parameters such as number of the layers of the face sheets, boundary conditions, semi vertex angle of the cone, impact velocity of impactor, trapezoidal shape and in-plane stresses of the core are examined on the low velocity impact response of STCS. Comparison of the present results with those reported by other researchers, confirms the accuracy of the present method. Numerical results show that increasing the impact velocity of the impactor yields to increases in the maximum contact force and deflection, while the contact duration is decreased. In addition, the normal stresses induced in top layer are higher than bottom layer since the top layer is subjected to impact load. Furthermore, with considering structural damping, the contact force and dynamic deflection decrees.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.302-304
• /
• 2005

무선통신기술의 발달은 Smart열차제어시스템 개발의 동기를 제공하였다. Smart열차제어시스템의 진로제어장치도 무선통신기술을 적용하고 있다. 본 논문에서는 기존연동장치의 특징, 연동논리를 포함한 Smart 진로제어시스템의 개요 등을 검토하여 새로운 연동도표를 제안하고 있다.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.4
• /
• pp.307-313
• /
• 2010

Stanniocalcin 1 (STC1) is a glycoprotein hormone that is important in the maintenance of calcium and phosphate homeostasis in both fish and mammals. STC1 and its paralog STC2 are expressed in multiple tissues in fishes, although the physiological roles of piscine STCs are still unclear compared with those of mammals. In this study, we cloned olive flounder STC1 (ofSTC1) and ofSTC2 cDNAs into pET28a vector and used E. coli Rosetta (DE3) as the host strain for protein expression. Expression experiments were carried out using isopropyl-$\beta$-D-thiogalactoside (IPTG) and nickel affinity chromatography. We could identify the recombinant proteins as single 29.5 kDa (ofSTC1) and 33.2 kDa (ofSTC2) bands in the insoluble fraction on sodium dodecyl sulfate- polyacrylamide gel electrophoresis (SDS-PAGE). These results indicate that ofSTC1 and ofSTC2 were expressed as insoluble proteins in E. coli. Furthermore, the injection of ofSTC1 protein into juvenile tilapia resulted in a decrease of the serum calcium level. These results suggest that the purified fish STC1 and STC2 proteins may be used to elucidate the physiological role of STCs in fishes.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.98-102
• /
• 2005

In the QR Decomposition-based (QRD) decoding class, the system performance is sensitive to the error propagation. Thus, it is critical to correctly decode the previous layers. One approach to desensitize the error propagation is to propose the optimal decoding order of layers. In this work, we propose a new extended-list Sorted QRD-base (SQRD) decoding approach. In the proposed decoding scheme, the solution of the few first layers is extended as the list of promising possible solutions. By doing so, the diversity of the lowest layer is increased. As a result, the system performance is less sensitive to the error propagation than its counterparts. The proposed approach is verified by the computer simulation results.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.5-14
• /
• 2023

In this study, LiDAR-reflective black hollow-structured silica/titania(B-HST) materials are successfully synthesized by employing the NaBH₄ reduction and etching method on silica/titania core/shell(STCS) materials, which also effectively enhance near-infrared(NIR) reflectance. Moreover, core-etched supernatant solutions are collected and recycled for the synthesis of extracted silica(e-SiO₂) process, which successfully applies as filler materials for semiconductor epoxy molding compound(EMC). In detail, B-HST materials, fabricated by the sequential experimental steps of sol-gel, reduction, and sonication-mediated etching method, manifest blackness(L^*) of 13.2 similar to black paint and excellent NIR reflectance(31.1%). Consequently, B-HST materials are successfully prepared as LiDAR-reflective black materials. Additionally, core-etched supernatant solution with silanol precursors are employed for synthesis of homogeneous silica filler materials via sol-gel method. As-synthesized silica fillers are incorporated with epoxy resin and carbon black for the preparation of semiconductor EMC. Experimentally synthesized EMC exhibits comparable mechanical-chemical properties to commercial EMC. Conclusively, this study successfully proposes designing procedure and practical experimental method for simultaneously synthesizing the NIR-reflective black materials for self-driving vehicles and EMC materials for semiconductors, which are materials suitable for the industrial 4.0 era, and presented their applicability in future industries.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.7
• /
• pp.1452-1457
• /
• 2005

In the QR Decomposition-based (QRD) decoding class, the system performance is sensitive to the error propagation. Thus, it is critical to correctly decode the previous layers. One apprach to desensitize the error propagation is to propose the optimal decoding order of layers. In this wort we propose a new extended-list Soled QRD-based (SQRD) decoding approach. In the proposed decoding scheme, the solution of the few first layers is extended as the list of promising possible solutions. By doing so, the diversity of the lowest layer is increased. As a result, the system performance is less sensitive to the error propagation than its counterparts. The proposed approach is verified by the computer simulation results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.5A
• /
• pp.475-483
• /
• 2007

Recently, consumers demand high-quality wireless multimedia services via terrestrial and satellite network. And the interest for new services to sustain its successful commercial deployment grows tremendously. So, the MIMO schemes, such as STCs, MRC, has been used for realizing high reliability. However, MIMO schemes has some limitations. MIMO scheme needs more size, cost, and hardware complexity to employ additional antennas. Moreover, sufficient spaces between antennas are required to guarantee the independence of each channel and the devices which use multiple antennas should be enlarged. A cooperative transmission technique which is detect and forward type applying virtual MIMO with STBC matrix in DVB-RCT(Digital Video Broadcasting with Return Channel via Terrestrial) system based on OFDMA is also proposed.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.6
• /
• pp.439-444
• /
• 2020

An increase in the temperature of photovoltaic (PV) modules causes reduced power output and shorter lifetime. Because of these characteristics, demands for the heat dissipation of PV modules are increasing. In this study, we attached a heat dissipation sheet to the back sheet of a shingled PV module and observed the temperature changes. The PV shingled module was tested under Standard Test Conditions (STCs; irradiance: 1,000 W/㎡, temperature: 25℃, air mass: 1.5) using a solar radiation tester, wherein the temperature of the PV module was measured by irradiating light for a certain duration. As a result, the temperature of the PV module with the heat dissipation sheet decreased by 3℃ compared to that without a heat dissipation sheet. This indicated that the power loss was caused by a temperature increase of the PV module. In addition, it was confirmed that the primary parameter contributing to the reduced PV module output power was the open circuit voltage (Voc).