• IEMEK Journal of Embedded Systems and Applications
• /
• v.14 no.1
• /
• pp.51-61
• /
• 2019

There are strict evaluation processes before using new processors to satellites. Engineers evaluate processors from various viewpoints including specification, development environment, and cost. From a viewpoint of computation power, manufacturers provide benchmark results with processors, and engineers decide which processors are adequate to their satellites by comparing the benchmark results with requirements of their satellites. However, the benchmark results depends on a test environment of manufacturers, and it is quite difficult to achieve similar performance in a target environment. Therefore, it is necessary to evaluate the processors in the target environment. This paper compares performance of a processor, AT697F/LEON2, in software testbed (STB) with three development boards of XC2V/LEON3, GR712RC/LEON3, and GR740/LEON4. Seven benchmark functions of Dhrystone, Stanford, Coremark, Whetstone, Flops, NBench, and MiBench are selected. Results are analyzed with hardware and software properties: hardware properties of core architecture, number of cores, cache, and memory; and software properties of build options and compilers. Based on the analysis, this paper describes a guideline for choosing processors for next generation satellites.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.370-375
• /
• 2004

Fatigue tests were carried out to find the fatigue characteristics in the super-long life range by using a cantilever type rotational bending fatigue test machine. Three kinds of specimen in bearing steels with the quenched and tempered in air (A and B, B: shot peened after heal treatment) and under vacuum conditions(C:non-shot peened)were tested in this study. S-N curves obtained from fatigue tests of C specimen tend to come dawn again in the super-long life range due to fish-eye type cracking, while most of A and B specimens fractured by surface defects such as scratches and slip lines. This duplex S-N behavior for the high strength steels have to be reviewed by the change of fracture modes.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.694-702
• /
• 2007

The SSWM(Software Switching Mechanism) of I-processor concept using non-real time in-house software simulation program is an effective method in order to develop the flight control law in desktop or HQS environment. And, this system has some advantages compare to HSWM(Hardware Switching Mechanism) such as remove the time delay effectiveness and reduce the costs of development. But, if this system loading to the OFP(Operational Flight Program), the OFP guarantee the enough throughput in order to calculate the two control law at once. Therefore, the HSWM(Hardware Switching Mechanism) of 2-processor concept is necessary. This paper addresses the concept of HSWM of the HQS-PC interface using TCP/IP(Transmission Control Protocol/Internet Protocol) communication based on flight control law of advanced supersonic trainer. And, the fader logic of TFS(Transient Free Switch) and stand-by mode of reset '0' type are designed in order to reduce the abrupt transient response and minimize the integrator effect in pitch axis. The result of the analysis based on HQS pilot simulation using HSWM reveals that the flight control systems are switching between two computers without any problem.

• Aerospace Engineering and Technology
• /
• v.6 no.2
• /
• pp.45-51
• /
• 2007

The various levels of test are performed to verify the correctness, completeness, and quality of the developed flight software. The three main test levels are unit test, integration test and verification test. The flight software unit test is performed on the individual PC environment using target simulator. And integration and verification test is mainly performed on STB(S/W Test Bed) which provides test and debugging environments for flight software on the target board This document is to present the test environment for the next generation low earth orbit satellite flight software development.

• Journal of KIISE:Information Networking
• /
• v.36 no.5
• /
• pp.376-382
• /
• 2009

The recent growth of cable broadcast technology such as Tru2Way enables the cable service operator to provide more enhanced experiences to cable TV audience. As a result, various applications have been produced and user can easily access cable network to receive multimedia content as well as interactive application in cable environment. In order for current cable technology to be accepted as a web extended technology, a process of web based applications having a web document and multimedia resources, proper web service definition and middleware architecture for existing cable environment should be established. In this paper, we define a web application for cable environment and propose a middIeware architecture which can process web application based on Tru2Way technology

• Korean Journal of Agricultural Science
• /
• v.41 no.2
• /
• pp.135-139
• /
• 2014

Pathogenic E. coli associated post-weaning diarrhea (PWD) and edema disease are common diseases in commercially-housed weanling pigs. An enterotoxigenic E. coli (ETEC) oral challenge model has been used to mimic the physiological responses observed in commercial conditions. However, an oral challenge procedure has two major limitations: (1) the ETEC cell density is unknown at the point of oral inoculation, and (2) blending ETEC with traditional TSB (trypticase soy broth) is not palatable and hence decreases acceptability by piglets. Therefore, the purposes of this study were to (1) establish a regression equation that can be used for estimation of ETEC concentration in dilution media using the spectrophotometric measurement of cell density; and (2) examine survival of ETEC after blending either with TSB, sweetener or dextrose. A strain of ETEC (serogroup beta-hemolytic E. coli O149; K91; F4; toxins LT, STa, STb) was grown in TSB for 3.5 hours, centrifuged, the supernatant was discarded, and the ETEC pellet was then blended either with TSB (100 mL), sweetener (60 mL TSB + 40 mL fruit flavored concentrate), or dextrose (50 mL TSB + 50 mL dextrose; 0.5g/mL dextrose). Cell density was measured using the colorimetric method and also plated on a 5% sheep blood agar for counting of ETEC colony forming units at 0, 5, 35, 65 and 125 min after blending. The optical density at 600 nm explained 83% of ETEC colony forming units, indicating that the established linear equation (y= 6E+08x - 4E+07, P<0.004) can be used for robust quantification of ETEC cell density in TSB, sweetener and dextrose media. When ETEC was blended with sweetener and dextrose, survival of ETEC was decreased by 45% and 72% within 5 min post-blending. Therefore, further research is required to find out the suitable medium that has potential to improve palatability without compromising survival of ETEC.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.271-278
• /
• 2020

Enterotoxigenic Escherichia coli is one of the major causative infectious agents of diarrhea in newborn and post-weaning pigs and leads to a large economic loss worldwide. However, there is limited information on the distribution and characterization of virulence genes in E. coli isolated from diarrheic piglets, which also applies to the current status of pig farms in Korea. To investigate the prevalence and characterization of virulence genes in E. coli related to diarrhea in piglets, the rectal swab samples of diarrheic piglets (aged 2 d to 6 w) were collected from 163 farms between 2013 and 2016. Five to 10 individual swab samples from the same farm were pooled and cultured on MacConkey agar plates, and E. coli were identified using the API 32E system. Three sets of multiplex PCRs were used to detect 13 E. coli virulence genes. As a result, a total of 172 E. coli isolates encoding one or more of the virulence genes were identified. Among them, the prevalence of individual virulence gene was as follows, (1) fimbrial adhesins (43.0%): F4 (16.9%), F5 (4.1%), F6 (1.7%), F18 (21.5%), and F41 (3.5%); (2) toxins (90.1%): LT (19.2%), STa (20.9%), STb (25.6%), Stx2e (15.1%), EAST1 (48.3%); and (3) non-fimbrial adhesin (19.6%): EAE (14.0%), AIDA-1 (11.6%) and PAA (8.7%), respectively. Taken together, various pathotypes and virotypes of E. coli were identified in diarrheic piglets. These results suggest a broad array of virulence genes is associated with coliform diarrhea in piglets in Korea.

• Journal of Satellite, Information and Communications
• /
• v.9 no.1
• /
• pp.79-84
• /
• 2014

Increasing demand for realistic media and improvement of transmission and device techniques accelerate ultra-high definition(UHD) service realization. In Korea, the cable TV broadcasting companies are planning to commercialize in Apr. 2014. For the terrestrial TV broadcasting service, technical issues are considered for the specification of UHD broadcasting system. However, the frequency bands and the system bandwidth for the terrestrial UHD broadcasting system have not been decided. In this paper, we propose required spectrum bandwidth for the next-generation terrestrial broadcasting service considering source coding, error correcting codes and modulation techniques. Also, we propose frequency management plan for terrestrial UHD broadcasting system in which we divide all parts of the country into 9 frequency zones and allocate 4 frequency band to each frequency zone considering single frequency network (SFN).

• Convergence Security Journal
• /
• v.15 no.2
• /
• pp.3-9
• /
• 2015

The development of the digital compression technology and the broadcasting receiver's processing power make it possible to apply a multi-view function to the broadcasting services. The multi-view function is usually utilized to provide simultaneously several programs to viewers or to implement a multi-angle service of a sports program that allows a viewer to choose a video of his/her prefer viewpoint. The paper proposes an integrated method for utilizing a multi-view function in the digital broadcasting environment in which more than 100 programs are on air and there may be various data services which want to use multi-view video clips. For the purpose, a method of composing and transmitting multi-view videos and related information has been devised and a Java API to utilize the rapid editing function of a decoding chip-set has been implemented to clip, resize, and display parts of the multi-view videos.

• The Korean Journal of Mycology
• /
• v.35 no.1
• /
• pp.37-42
• /
• 2007

The mushroom Lentinus lepideus was used to produce mycelial as well as soluble polysaccharides in bioreactor cultures. To determine optimal submerged culture conditions, both growth characteristics and water soluble polysaccharides production were compared among four different types of bioreactor and culture conditions. For the production of mycelial biomass, the following bioreactors were proven to be effective in decreasing order: an external-loop type air-lift bioreactor (ETAB; 7g/l), a balloon type air bubble bioreactor (BTBB; 6.2g/l), a stirrer type bioreactor (STB; 6g/l), and a column type air bubble bioreactor (CTBB; 5g/l). Maxiaml production of water soluble exopolysaccharides (EPS; 0.62g/l) and endopolysaccharides (PPS; 7.7%) could also be obtained from BTBB. The mycelial biomass increased with increase in glucose concentration from 15g/l to 75g/l in the media. In contrast, PPS contents in the cells decreased with increase in glucose concentration in the media, showing the highest PPS content (7%) at 15g/l. Among different medium feeding types, fed-batch culture based on concentration control in media (10g/l) produced higher mycelia than fed-batch culture based on volume control of media (5.8g/l) or batch culture (3.4g/l). EPS production was also higher in fed-batch culture based on medium concentration control than that in other feeding types.