• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.6
• /
• pp.720-726
• /
• 2007

This study was performed to investigate effects of raw sea tangle products on idiopathic constipation. A total of thirty-eight women participated voluntarily in this study. They were placed into one of four groups by their total colonic transit time (TCTT) to make the four groups have the same TCTT. In the first trial, the subjects in Control group were fed 3 times of 150 mL of mineral water per day for 2 weeks, those in +Control group were fed a kind of stool softener as well as the same mineral water for 3 times, those in STT group were fed 3 times of 150 mL of sea tangle tea and those in STB group were fed 3 times of 150 mL of sea tangle beverage. After 6 weeks, a second trial was performed for another 2 weeks. Although the TCTT of the group exposed to of KolomarkTM was not significantly reduced, the subjects in STT group answered that their evacuation activities were significantly improved; evacuation frequency was increased, stool hardness was reduced, evacuation straining was lessened, stool amount was increased, incomplete sense of evacuation was lessened, and major evacuation time was improved like those in +Control group. The results imply that it is worthy to develop some products of raw sea tangle such as STT, which are effective in treating or preventing constipation.

• Journal of the Korean Magnetics Society
• /
• v.17 no.4
• /
• pp.166-171
• /
• 2007

We report the magneto-transport properties of an individual single crystalline Bi nanowire grown by a spontaneous growth method. We have successfully fabricated a four-terminal device based on an individual 400-nm-diameter nanowire using plasma etching technique to remove an oxide layer forming on the outer surface of the nanowire. The transverse MR (2496% at 110 K) and longitudinal MR ratios (38% at 2 K) for the Bi nanowire were found to be the largest known values in Bi nanowires. This result demonstrates that the Bi nanowires grown by the spontaneous growth method are the highest-quality single crystalline in the literatures ever reported. We find that temperature dependence of Fermi energy ($E_F$) and band overlap (${\triangle}_0$) leads to the imbalance between electron concentration ($n_e$) and hole concentration ($n_h$) in the Bi nanowire, which is good agreement with the calculated $n_e\;and\;n_h$ from the respective density of states, N(E), for electrons and holes. We also find that the imbalance of $n_e\;and\;n_h$ plays a crucial role in determining magnetoresistance (MR) at T<75 K for $R_T$ and at T<205 K for $R_L$, while mean-free path is responsible for MR at T>75 K for $R_T$ and T>205 K for $R_L$.

• The Korean Journal of Mycology
• /
• v.34 no.1
• /
• pp.1-6
• /
• 2006

In order to select a suitable bioreactor type for the submerged cultivation of Ganoderma applanatum, both growth characteristics and polysaccharides production were compared among four different types of bioreactor. These include an external-loop type air-lift bioreactor (ETAB), a balloon type air bubble bioreactor (BTBB), a column type air bubble bioreactor (CTBB) and a stirrer type bioreactor (STB). The mycelial biomass produced from the reactors were in decreasing order: ETAB ($7\;g/{\ell}$) > BTBB ($6.2\;g/{\ell}$) > STB ($6\;g/{\ell}$) > CTBB ($5\;g/{\ell}$). Maximal soluble exopolysaccharides ($1\;g/{\ell}$) and endopolysaccharides (2.7%) were also obtained from ETAB. Thus, the ETAB was most suitable for submerged culture of G applanatum mycelium. Based on the results, ETAB was chosen for further detailed study. The most effective aeration rate for the mycelial growth in ETAB ranged from 0.05 to 0.1 vvm. For the maximal production, the mycelium at the initial growth stage needed low aeration rate to reduce cell damages by fluid flow. However, as the mycelia grew, the culture became viscous and thus needed higher aeration. The molecular weight of exopolysaccharides obtained from the culture grown in ETAB was higher than that from the culture grown in other bioreactors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1105-1108
• /
• 2001

In these days, according s the increase of technological development the part demension goes up for ultra-precision. It is grinding behavior that is important processing which directly influences by machining accuracy at product quality with the net shape manufacturing. In this study, by using CBN wheel an analysis carried out for workpiece's profiles and its characteristics by measuring grinding force and surface roughness. Workpiece materials were used STD11, SUS304 and STB2 varing condition of feedrate and depth of cut.

• Journal of Power System Engineering
• /
• v.6 no.1
• /
• pp.50-54
• /
• 2002

The surface roughness is one of important parameters to obtain the high quality of products in grinding process. In precision components, it's level must be limited to a certain range. This study evaluated experimentally grinding characteristics of workpieces in the surface grinding process. The grinding forces were obtained to compare with the grindability of workpieces such as STD11, STS304 and STB2. The surface roughnesses on various workpieces were measured according to increasing the feed and the depth of cut. In addition, the wear amount of wheels according to the number of grinding were obtained. Also the grinding wheel and the ground surface were observed with a microscopic instrument.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.406-413
• /
• 2000

The friction and wear behaviors of Magnetron Sputtered MoS$_2$films were investigated by using a pin on disk type tester which was designed and manufactured for this experiment. The experiment was conducted by using silicon nitride (Si$_3$N$_4$) as a pin material and Magnetron Sputtered MoS$_2$on bearing steel (STB2) as a disk material, under operating conditions that include different surface roughness (Polishing specimen, Grinding specimen)(2types), linear sliding velocities in the range of 22, 44, 66mm/sec (3types), normal loads vary from 9.8N, 19.6N, 29.4N(3types), corresponding to contact pressures of 1.9∼2.7GPa and atmospheric conditions of high vacuum( 1.3${\times}$10$\^$-4/Pa), medium vacuum( 1.3${\times}$10$\^$-l/Pa), ambient air(10$\^$5/Pa)(3types). We investigated fracture mechanism in magnetron sputtered MoS$_2$films with Magnetron Sputtering method in each experiment.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.17-27
• /
• 2022

In this study, we evaluated the antioxidant and antidiabetic effects of buckwheat. The diabetic animal models were divided into four groups: normal mice group (NOR), streptozotocin-induced diabetic mice group (STZ), group treated with seeds of common or tartary buckwheat (SCB or STB), and the group treated with whole plants of common or tartary buckwheat (PCB or PTB). Rutin content was 44-48 times higher in STB or PTB than in SCB. Oral glucose tolerance and insulin resistance were significantly reduced by treatment with STB, PCB, and PTB. Treatment with PTB also decreased the serum glucose level significantly and the serum insulin levels slightly compared with the STZ group. These results suggest that rutin content and antioxidant activity are closely related to the antidiabetic effect of the treatment. Our results demonstrate that the seeds of tartary buckwheat and whole plants of either common or tartary buckwheat have antidiabetic effects-attenuating blood glucose in an animal model of type II diabetes.

• Journal of the Korean Society of Visualization
• /
• v.16 no.2
• /
• pp.23-30
• /
• 2018

The present study compares flow fields reconstructed by data assimilation method with different combinations of parameters. As a data assimilation method, Vortex-in-Cell-sharp (VIC#), which supplements additional constraints and multigrid approximation to Vortex-in-Cell-plus (VIC+), is used to reconstruct flow fields from scattered particle tracks. Two parameters, standard deviation of Gaussian radial basis function (RBF) and grid spacing, are mainly tested using artificial data sets which contain few particle tracks. Consequent flow fields are analyzed in terms of flow structure sizes. It is demonstrated that sizes of the flow structures are proportional to an actual scale of the standard deviation of RBF. It implies that a combination of larger grid spacing and smaller standard deviation which preserves the actual standard deviation is able to save computational resources in case of a low track density. In addition, a simple comparison using an experimental data filled with dense particle tracks is conducted.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.3
• /
• pp.169-176
• /
• 1996

Effect of retained austenite on rolling contact fatigue of nitrocarburized high-carbon chromium bearing steel has been investigated to develop surface-hardened bearing steel with imprved resistance to rolling contact fatigue. Fatigue tests were conducted in elesto-hydrodynamic lubricating conditions at a shaft speed of 5,000rpm, under max, hertzian stress of $492kg/mm^2$. Volume fraction of retained austenite in austenitic nitrocarburized STB2 steel was controlled by tempering at various temperature, $200{\sim}250^{\circ}C$. It was observed using TEM that decomposition of retained austenite during tempering at $250^{\circ}C$ was the highest in quantity, resulted in formation of lower bainite. Rolling contact fatigue life of the specimens with lower bainite, formed by decomposition of retained austenite, was improved in comparison with there of specimens with more amount of retained austenite.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.78-87
• /
• 2001

The friction and wear behaviors of WC/C multilayer coating were investigated by using a pin on disk type tester. The experiment was conducted by using silicon nitride (S $i_{3}$ $N_{4}$) as a pin material and WC/C multilayer coating on bearing steel (STB2) as a disk material, under various environments that are atmospheric conditions of high vacuum( 1,3$\times$10$^{-4}$ Pa), medium vacuum( 1.3$\times$10$^{-l}$Pa). ambient air( 10$^{5}$ pa)(3 types) and relative humidity(2~98%) conditions. The results showed that WC/C coating fracture was suddenly increased with increasing degree of vacuum, because of high adhesion. So, WC/C coating could not be displayed their ability as solid lubricant. WC/C coating could be displayed better abilitv as solid lubricant with increasing relative humidity. because of oxide film, size and shape of wear debris. The friction coefficient and specific wear rate became better about RH 50%.%.