• Journal of Digital Convergence
• /
• v.11 no.12
• /
• pp.821-828
• /
• 2013

This paper proposed CHELS-App that Smart-phone APP optimized cultural heritage experiential learning is configured can learning and sightseeing at the same time with experience the cultural heritage and enjoying the mission through quests to take advantage of the Smart-phone. CHELS-App is provide a guide maps by using the location-based service and cultural commentary(commentary, photos, quizzes, games, cartoon) with capability of event push about the Jongmyo Shrine as world heritage, and configured with capability of experience diary create and foot stamp through these experiences.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.247-247
• /
• 2012

Plasmon subwavelength nanostructures enable the structurally modulated color due to the resonance conditions for the specific wavelength range of light with the nanoscale hole arrays on a metal layer. While the unique properties offered from a single layer of metal may open up the potential applications of integrated devices to displays and sensors, fabrication requirements in nanoscale, typically on the order of or smaller than the wavelength of light in a corresponding medium can limit the cost-effective implementation of the plasmonic nanostructures. Simpler nanoscale replication technologies based on the soft lithography or roll-to-roll nanoimprinting can introduce economically feasible manufacturing process for these devices. Such replication requires an optimal design of a master template to produce a stamp that can be applied for a roll-to-roll nanoimprinting. In this paper, a master mold with subwavelength nanostructures is fabricated and optimized using focused ion beam for the applications to nanoimprinting process. Au thin film layer is deposited by sputtering on a glass that serves as a dielectric substrate. Focused ion beam milling (FIB, JEOL JIB-4601F) is used to fabricate surface plasmon subwavelength nanostructures made of periodic hole arrays. The light spectrum of the fabricated nanostructures is characterized by using UV-Vis-NIR spectrophotometer (Agilent, Cary 5000) and the surface morphology is measured by using atomic force microscope (AFM, Park System XE-100) and scanning electron microscope (SEM, JEOL JSM-7100F). Relationship between the parameters of the hole arrays and the corresponding spectral characteristics and their potential applications are also discussed.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.831-833
• /
• 2004

In this paper, an obstacle avoidance algorithm is proposed for a network-based robot considering network delay by distribution. The proposed algorithm is based on the VFH(Vector Field Histogram) algorithm, and for the network-based robot system, in which it is assumed robot localization information is transmitted through network communication. In this paper, target vector for the VFH algorithm is estimated through the robot localization information and the measurement of its delay by distribution. The delay measurement is performed by time-stamp method. To synchronize all local clocks of the nodes distributed on the network, a global clock synchronization method is adopted. With the delay measurement, the robot localization estimation is performed by calculating the kinematics of the robot. The validation of the proposed algorithm is performed through the performance comparison of the obstacle avoidance between the proposed algorithm and the existing VFH algorithm on the network-based autonomous mobile robot.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.2
• /
• pp.232-239
• /
• 2015

In this paper, we study the dry transfer technology utilizing PDMS (Polydimethylsiloxane) stamp of a large single-layer graphene grown on Cu-foil as catalytic metal by using Chemical Vapor Deposition (CVD). By changing the surface property of the target substrate through $UV/O_3$ treatment, we can transfer the graphene on the target substrate while minimizing mechanical damages of graphene layer. Multi-layer (1~4 layers) graphene was stacked on $SiO_2/Si$ wafer successfully by repeating thetransfer method/process and then optical transmittance and sheet resistance of graphene layers have been measured as a quality assessment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.233-233
• /
• 2015

We report on a simple method for inducing physical and chemical property-gradient on nanoimprinted patterns by intensity-regulated plasma treatment under caved sample stage. As for the size gradient, a line pattern having a linewidth of 294.9 nm was etched to have gradually varying width from 277.4 nm to 147.9 nm. Modified pattern was proven to be adaptable to replica stamp for reversal patterning. To investigate the wettability gradient, imprinted nanopatterns were coated with fluoroalkylsilane to increase the hydrophobicity, and the surface was modified to have gradually varying wettability from hydrophobic to hydrophilic (contact angle was ${\sim}160^{\circ}$ to ${\sim}5^{\circ}$ on a single chip). This method is expected to be applicable to the selective adsorption of biological entities and hydrodynamic manipulation of liquid droplets for the pumpless microfluidics.

• Journal of Ubiquitous Convergence Technology
• /
• v.2 no.2
• /
• pp.88-96
• /
• 2008

IPTV Content delivery systems over wired networks confront scalability problems due to their high network bandwidth requirement for real-time services. Especially, VoD service provides Trick Mode features such as pause, fast forward and similar operations. However, Trick Mode services are delivered by the method of unicast only for controlling of the stream. With a point of views, this paper propose a new real-time multimedia streaming architecture over IP Networks, which tries to achieve bandwidth efficiency and supporting for mass clients better than traditional unicast services. The proposed methods divide the Transport Stream into a series of segments. After that, this divided partial Transport Stream makes multicast streaming periodically. Meanwhile Set-top Box of a client makes a rearrangement orderly by using Presentation Time Stamp field from the served Transport Stream packets. While the current Transport Stream segment is playing, it should be guaranteed that the next segment is downloaded on time. Consequently, the original video content can be played out continuously. The detail introduction of a new real-time multimedia streaming system with analysis and simulation follows as below.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.13-13
• /
• 2009

We have investigated the fabrication and properties of bendable PZT film formed on plastic substrates for the application in flexible memory. These devices used the PZT active layer formed on $SiO_2/Si$ wafer by sol-gel method with optimized device layouts and Pt electrodes. After etching Pt/PZT/Pt layers, patterned by photolithography process. these layers were transferred on PET plastic substrate using elastomeric stamp. The level of performance that can be achieved approaches that of traditional PZT. devices on rigid bulk wafers.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.13 no.1
• /
• pp.50-58
• /
• 2013

Estimating a driver's head pose is an important task in driver-assistance systems because it can provide information about where a driver is looking, thereby giving useful cues about the status of the driver (i.e., paying proper attention, fatigued, etc.). This study proposes a system for estimating the head pose using monocular images, which includes a novel use of backprojection. The system can use a single image to estimate a driver's head pose at a particular time stamp, or an image sequence to support the analysis of a driver's status. Using our proposed system, we compared two previous pose estimation approaches. We introduced an approach for providing ground-truth reference data using a mannequin model. Our experimental results demonstrate that the proposed system provides relatively accurate estimations of the yaw, tilt, and roll angle. The results also show that one of the pose estimation approaches (perspective-n-point, PnP) provided a consistently better estimate compared to the other (pose from orthography and scaling with iterations, POSIT) using our proposed system.

• Journal of the Korean Society of Costume
• /
• v.51 no.4
• /
• pp.81-95
• /
• 2001

The purpose of this study is to categorize the typs of fabrics and to analyze weaving method and pattern design on the silk fabrics from Jang-Gi Jung s tomb. The conclusions of this research are as follows. 1) Among the 32 pieces of excavated clothes, 90% of them were made of silk fabric and 65% used patterned silk. I would assume, therefore, that the tomb was owned by a person of higher society who could afford the best clothes of the time. 2) The weaving methods of silk include tabby, twill damask with different direction (2/1 warp faced ground, 1/3$\cdot$1/4 weft faced pathern), self-patterned satin damask (4/1 warp faces ground, 1/4 weft faced pattern), and brocaded satin damask. 3) The arrangement of the motifs and the kinds of patterns on these silk fabric can be divided into two categories: first group is allover arrangement of peony or lotus and second group is the scattered arrangement of omen of luck. 4) Two pieces of fabric was stamped and the letters of the stamp make me to think about the possibility that the fabrics are from China. But to make this paint clear more relics of this kind should be excavated so that further research can be done.

• Journal of Information Technology Services
• /
• v.10 no.4
• /
• pp.243-258
• /
• 2011

With increasing interest in ubiquitous computing technology, an infrastructure for the short-distance wireless communication has been extended socially, bringing spotlight to the security system using the image or location. In case of existing security system, there have been issues such as the occurrences of blind spots, difficulty in recognizing multiple objects and storing of the unspecified objects. In order to solve this issue, zone-based location-estimation search system for the image have been suggested as an alternative based on the real-time location determination technology combined with image. This paper intends to suggest the search service for the image zone-based location-estimation. For this, it proposed the location determination algorism using IEEE 802.15.4/ZigBee's RSSI and for real-time image service, the RTP/RTCP protocol was applied. In order to combine the location and image, at the event of the entry of the specified target, the record of the time for image and the time of occurrence of the event on a global time standard, it has devised a time stamp, applying XML based meta data formation method based on the media's feature data based in connection with the location based data for the events of the object. Using the proposed meta data, the service mode which can search for the image from the point in time when the entry of the specified target was proposed.