• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.279-290
• /
• 2016

The performance of upflow anaerobic bioelectrochemical reactor (UABE), equipped with electrodes (anode and cathode) inside the upflow anaerobic reactor, was compared to that of upflow anaerobic sludge blanket (UASB) reactor for the treatment of acidic distillery wastewater. The UASB was stable in pH, alkalinity and VFAs until the organic loading rate (OLR) of 4.0 g COD/L.d, but it became unstable over 4.0 g COD/L.d. As a response to the abrupt doubling in OLR, the perturbation in the state variables for the UABE was smaller, compared to the UASB, and quickly recovered. The UABE stability was better than the UASB at higher OLR of 4.0-8.0 g COD/L.d, and the UABE showed better performance in specific methane production rate (2,076mL $CH_4/L.d$), methane content in biogas (66.8%), and COD removal efficiency (82.3%) at 8.0 g COD/L.d than the UASB. The maximum methane yield in UABE was about 407mL/g $COD_r$ at 4.0 g COD/L.d, which was considerably higher than about $282mL/g\;COD_r$ in UASB. The rate limiting step for the bioelectrochemical reaction in UABE was the oxidation of organic matter on the anode surface, and the electrode reactions were considerably affected by the pH at 8.0 g COD/L.d of high OLR. The maximum energy efficiency of UABE was 99.5%, at 4.0 g COD/L.d of OLR. The UABE can be an advanced high rate anaerobic process for the treatment of acidic distillery wastewater.

• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.165-173
• /
• 2013

To establishment of PT Program for Indoor air quality field that manufacture of confidential development PTMs (proficiency testing materials) and examined of proficiency testing evaluation included sampling process whether or not that is valid. Confirmation of homogeneity and stability of PTMs prepared. PTMs were confirmed to be homogeneous enough to be used as proficiency testing materials since withinbottle homogeneities of the RMs were lower than 0.3 times of targeted standard deviation of proficiency testing. The result of this study showed that the Robust RSD of proficiency testing for VOCs (volatile organic compounds) appeared 23~43% in concentration of 50~320 ${\mu}g/m^3$ for Method A(Distribution by adsorption in Tenax-tube of VOCs), but less 13~42% in concentration of 200~1200 ${\mu}g/m^3$, 16~31% in concentration of 100~450 ${\mu}g/m^3$ for Method B (distribution by VOCs of gas phase in 10L Tedalr bag), C (directly sampling of cylinder with high pressure) respectively. The result of this study showed that method C with sampling is most adequate to the proficiency testing for VOCs in indoor air.

• The Journal of Korean Society for Radiation Therapy
• /
• v.16 no.2
• /
• pp.19-24
• /
• 2004

Introduction : The Vaginal, the urethra, the vulva and anal cancer avoid the many dose to femur head and the additional treatment is necessary in inguinal LN. The partial transmission block to use inguinal LN addition there is to a method which it treats and produce partial transmission block a method and the MLC which to it analyzes. Material & Methode : The Inguinal the LN treatment patient partial transmission it used block and the MLC in the object and with solid water phantom with the patient it reappeared the same depth. In order to analyze the error of the junction the EDR2 (Extended dose range, the Kodak and the U.S) it used the Film and it got film scanner it got the beam profile. The partial transmission block and the MLC bias characteristic, accuracy and stability of production for, it shared at hour and comparison it analyzed. Result : The partial the transmission block compares in the MLC and the block production is difficult and production hour also above 1 hours. The custom the block the place where it revises the error of the junction is a difficult problem. If use of the MLC the fabrication will be break and only the periodical calibration of the MLC it will do and it will be able to use easily. Conclusion : The Inguinal there is to LN treatment and partial transmission block and the MLC there is efficiency of each one but there is a place where the junction of block for partial transmission block the production hour is caught long and it fixes and a point where the control of the block is difficult. like this problem it transfers with the MLC and if it treats, it means the effective treatment will be possible.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.1
• /
• pp.31-36
• /
• 2002

Purpose : ACL (anterior cruciate ligament) reconstruction using achilles allograft was done for whom ACL injured person in recreational sports activity. The purpose of this study was to evaluate the clinical results and return to their sports activity in these patients. Materials and Methods : ACL injured 56 amateur athletes who had experienced sports 3 times a week more than 5 years, reconstructed with Achilles allograft, and it was analyzed subjective and objective parameter, Tegner scoring, Telos stress arthrometer, Lysholm Knee Scoring System and modified Feagin scoring system. The average age was 25 years old (range: 18$\~$49), the average follow up period was 15 months (range: 12$\~$19). Morbid sports were football (29 cases), basket ball (14 cases), badminton (5 cases), tennis (3 cases), squash (2 cases) and otherwise (3 cases). Result : The mean Lysholm Knee Scoring System was improved to 88.2 from 60. Telos arthrometer in anterior stress test revealed 2.3 mm improved from 7.1 mm. The modified Feagin scoring system showed 50 cases (89$\%$) with excellent and good results. We had obtained 12 cases (21$\%$) of Tegner score VI, 32 cases (57$\%$) of score V, 20 cases (35%$\%$ of score IV, 3 (5.3$\%$) cases of score III. Conclusions : Reconstruction of anterior cruciate ligaments can restore stability sufficient to allow sports activity in ACL injured patients, but it’s difficult to achieve 'normal' sports activity. So we will have to solve the reasons of this dissatisfaction at furthermore.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.1
• /
• pp.21-25
• /
• 2002

Purpose: To evaluate the clinical results after anterior cruciate ligament (ACL) reconstruction with hamstring tendon and Ligament Anchor (LA) screw, which is newly designed for fixation of graft into femur. Materials and Methods: Fifty eight patients who were followed up at least more than 2 years after ACL reconstruction with four strands of Hamstring tendon and LA screw were included in this study. The graft was fixed with LA screw at femoral tunnel and with only bioabsorbable interference screw at tibial tunnel. The mean follow-up period was 28 months. The clinical results were evaluated by physical examination and Lysholm knee score. Widening of bony tunnel and anterior laxity difference compared with normal side by instrumented anterior laxity test with Telos(R) (Telos stress device; Austin & Associates, Inc., Polston, US) were evaluated. Results: The Lysholm knee score improved from 60.0 points preoperatively to 94.0 points at last follow up. On the Lachman test, there were mild (+) instability in 16 cases, moderate (++) in 24,severe (+++) in 18 preoperatively. 50 cases were converted to negative and 8 to mild instability at postoperative follow up. On instrumented anterior laxity test with Telos(R), difference between normal and affected knee on 20 lb was 12.9 mm in average preoperatively, and was decreased to 3.1mm at last follow-up. The femoral tunnel was widened from 10.6 mm postoperatively to 12.7 mm (21.1$\%$) at follow up on antero-posterior plane and from 10.7 mm to 12.4 mm (16.5$\%$) on lateral plane. Tibial tunnels was also widened from 9.8mm to 11.8mm (20.7$\%$) on antero-posterior plane and from 9.9mm to 11.7 mm ($18.9\%$) on lateral plane. Complications were: anterior knee crepitus in 17 case, quadriceps muscle atrophy(>3 cm) in 6, penetration of screw over the lateral femoral cortex in 5, saphenous nerve paresthesia in 2.Conclusions: ACL reconstruction with hamstring tendon and LA screw was one of the choice of grafts and fixation devices in restoring knee stability and in improving clinical results with little complications such as excessive widening of bony tunnel and anterior knee pain

• Applied Biological Chemistry
• /
• v.22 no.3
• /
• pp.181-189
• /
• 1979

In order to establish fertilizing technique for the increase of grain yield and its stability, the total absorbed amount of nutrients and nutritional status of rice plants at different growth stages were studied with respect to the nutrient contents and its relation to grain yield and yield components. This experiment was carried at three different level of nitrogen fertilization; two different seeding and transplanting times, and eight cultivars including both Japonica-and Tongil-type. The results of a part of these experiments are summarized as fallows: 1. The culm length tended to Increase with increasing fertilizer amount, but no significant difference between ordinary and heavy fertilization was observed in Tongil-type cultivars. 2. The panicle length was some what longer in ordinary and heavy fertilization than non-fertilization. 3. As the N-fertilizer level increases, the number of panicles per plant increased with higher response in Japonica-type cultivars than in Tongil-type cultivars. 4. The number of grains per panicle increased significantly in ordinary and heavy fertilization, compared to non-fertilization, but the difference in grain number per panicle among fertilizer treatment was smaller in Japonica-type cultivars than Tongil-type. 5. The 1,000 grains weight showed no significant difference among fertilization levels in ordinary transplanting, but indicated gradual decreasing tendency as the transplanting delayed. 6. In percentage of ripeness, there was no significant difference in ordinary transplanting, but hightly significant in late transplanting among N-fertilization levels and cultivars. 7. In yield, highly significant difference was shown among N-fertilizer levels and cultivars In Tongil-type variety, higher yield was obtained in ordinary fertilization than heavy fertilization. 8. The straw weight showed the tendency to increase in higher nitrogen level, but no significant difference between ordinaly and heavy fertilization was observed in Tonsil-type cultivars.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.195-202
• /
• 2016

The government has run and managed various forms of direct payment systems, such as the paddy and field direct payment, to ease the instability of farm incomes with respect to market opening, and preserve farm income. Direct payments to the agricultural sector is a center in the key policy instrument that plays an important role in income stabilization. Despite the large amount of spending in the farm unit, the status of direct payment, and policy effects the analysis of direct payments, such as stability of income contribution, are insufficient. This paper, using the farm unit DB in 2014 and 2015, performed farm level analysis of direct payment, and derived the implications of the performance evaluation system. As a result, the distribution of direct payment showed considerable bias to the left side compared to the normal distribution curve. Approximately half of the farms (49.3%) in 2014 DB should receive below 100,000 won per year by a direct payment. A larger-scale farm showed a significantly increased income effect and income stabilizing effect because direct payments make higher contributions to farm income in proportional to the area. In the more elderly farmers, a high contribution by direct payment to farm income was found to be an advantage; however, in small-scale farms of less than 0.5ha, direct payment contribution on farm household income was only 3%. In large-scale farms, 10ha or more, the contribution to farm income were found to be 29.4%. The income of large farms was 10 times larger than small farmers, and the direct payment entitlements that were received were 110 times larger. Through this policy, direct payments are required for future improvements and modifications.

• Journal of Intelligence and Information Systems
• /
• v.19 no.2
• /
• pp.39-54
• /
• 2013

Recent explosive increase of electronic commerce provides many advantageous purchase opportunities to customers. In this situation, customers who do not have enough knowledge about their purchases, may accept product recommendations. Product recommender systems automatically reflect user's preference and provide recommendation list to the users. Thus, product recommender system in online shopping store has been known as one of the most popular tools for one-to-one marketing. However, recommender systems which do not properly reflect user's preference cause user's disappointment and waste of time. In this study, we propose a novel recommender system which uses data mining and multi-model ensemble techniques to enhance the recommendation performance through reflecting the precise user's preference. The research data is collected from the real-world online shopping store, which deals products from famous art galleries and museums in Korea. The data initially contain 5759 transaction data, but finally remain 3167 transaction data after deletion of null data. In this study, we transform the categorical variables into dummy variables and exclude outlier data. The proposed model consists of two steps. The first step predicts customers who have high likelihood to purchase products in the online shopping store. In this step, we first use logistic regression, decision trees, and artificial neural networks to predict customers who have high likelihood to purchase products in each product group. We perform above data mining techniques using SAS E-Miner software. In this study, we partition datasets into two sets as modeling and validation sets for the logistic regression and decision trees. We also partition datasets into three sets as training, test, and validation sets for the artificial neural network model. The validation dataset is equal for the all experiments. Then we composite the results of each predictor using the multi-model ensemble techniques such as bagging and bumping. Bagging is the abbreviation of "Bootstrap Aggregation" and it composite outputs from several machine learning techniques for raising the performance and stability of prediction or classification. This technique is special form of the averaging method. Bumping is the abbreviation of "Bootstrap Umbrella of Model Parameter," and it only considers the model which has the lowest error value. The results show that bumping outperforms bagging and the other predictors except for "Poster" product group. For the "Poster" product group, artificial neural network model performs better than the other models. In the second step, we use the market basket analysis to extract association rules for co-purchased products. We can extract thirty one association rules according to values of Lift, Support, and Confidence measure. We set the minimum transaction frequency to support associations as 5%, maximum number of items in an association as 4, and minimum confidence for rule generation as 10%. This study also excludes the extracted association rules below 1 of lift value. We finally get fifteen association rules by excluding duplicate rules. Among the fifteen association rules, eleven rules contain association between products in "Office Supplies" product group, one rules include the association between "Office Supplies" and "Fashion" product groups, and other three rules contain association between "Office Supplies" and "Home Decoration" product groups. Finally, the proposed product recommender systems provides list of recommendations to the proper customers. We test the usability of the proposed system by using prototype and real-world transaction and profile data. For this end, we construct the prototype system by using the ASP, Java Script and Microsoft Access. In addition, we survey about user satisfaction for the recommended product list from the proposed system and the randomly selected product lists. The participants for the survey are 173 persons who use MSN Messenger, Daum Caf$\acute{e}$, and P2P services. We evaluate the user satisfaction using five-scale Likert measure. This study also performs "Paired Sample T-test" for the results of the survey. The results show that the proposed model outperforms the random selection model with 1% statistical significance level. It means that the users satisfied the recommended product list significantly. The results also show that the proposed system may be useful in real-world online shopping store.

• Proceedings of the Korean Sanitation Conference
• /
• 2005.12a
• /
• pp.76-97
• /
• 2005

As the recent change of multiformity and taste in clination in eating habit culture is yearly in creasing foods used oil and fats. Because the frying food is especially important snack , it's safty is very essential. In order to know the safty and harmfulness of frying oil and fats. The 20 kinds samples were purchased chicken fried food shops around the north of seoul and kyunggi. The acid value, iodine value, peroxide value, TBA value, fatty acid, carbonyl value, and smoke point of deep fat fried oils were analyzed. Results of analyzed, A company of deep fat frying oil showed stability state and C company and B company of deep fat frying oil is acidification to turned. But D company of deep fat frying oil showed quite a bit acidification progressived of used hydrogenated oil.

• Korean Security Journal
• /
• no.42
• /
• pp.7-36
• /
• 2015

This study aims at analyzing difference of social Security network, Community unity and local government trust according to socio-demographical features, exploring the relation of social Security network, Community unity and local government trust according to socio-demographical features, presenting results between each variable as a model and verifying the property of mutual ones. This study sampled general citizens in Gwangju for about 15 days Aug. 15 through Aug. 30, 2014, distributed total 450 copies using cluster random sampling, gathered 438 persons, 412 persons of whom were used for analysis. This study verified the validity and credibility of the questionnaire through an experts' meeting, preliminary test, factor analysis and credibility analysis. The credibility of questionnaire was ${\alpha}=.809{\sim}{\alpha}=.890$. The inout data were analyzed by study purpose using SPSSWIN 18.0, as statistical techniques, factor analysis, credibility analysis, correlation analysis, independent sample t verification, ANOVA, multi-regression analysis, path analysis etc. were used. the findings obtained through the above study methods are as follows. First, building a social Security network has an effect on Community institution. That is, the more activated a, the higher awareness on institution. the more activated street CCTV facilities, anti-crime design, local government Security education, the higher the stability. Second, building a social Security network has an effect on trust of local government. That is, the activated local autonomous anti-crime activity, anti-crime design. local government's Security education, police public oder service, the more increased trust of policy, service management, busines performance. Third, Community unity has an effect on trust of local government. That is, the better Community institution is achieved, the higher trust of policy. Also the stabler Community institution, the higher trust of business performance. Fourth, building a social Security network has a direct or indirect effect on Community unity and local government trust. That is, social Security network has a direct effect on trust of local government, but it has a higher effect through Community unity of parameter. Such results showed that Community unity in Gwangju Region is an important factor, which means it is an important variable mediating building a social Security network and trust of local government. To win trust of local residents, we need to prepare for various cultural events and active communication space and build a social Security network for uniting them.