• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.321-337
• /
• 2000

Dental caries, one of the most frequent dental disease, become larger because it can be thought as a simple disease. Further more, it can progress to unexpected root canal therapy with fabrication of crown that needs reduction of tooth structure. Base is required in a large caries and ZOE, ZPC, glass ionomer are used frequently as base material. They, with restorative material, can affect the longevity of the restoration. In this study, we assume that the mandibular 1st molar has deep class I cavity. So, installing the 3 base material, 3 kinds of fillings were restored over the base as follows; 1) amalgam only, 2) amalgam with ZPC, 3) amalgam with ZOE, 4) amalgam with GI cement, 5) gold inlay with ZPC, 6) gold inlay with GI cement, 7) composite resin only, 8) composite resin with GI cement. After develop the 3-dimensional model for finite element analysis, we observe the distribution of stress and temperature with force of 500N to apical direction at 3 point on occlusal surface and temperature of 55 degree, 15 degree on entire surface. The analyzed results were as follow : 1. Principal stress produced at the interface of base, dentin, cavity wall was smallest in case of using GI cement as base material under the amalgam. 2. Principal stress produced at the interface of base, dentin, cavity wall was smaller in case of using GI cement as a base material than ZPC under gold inlay. 3. Composite resin-filled tooth showed stress distributed over entire tooth structure. In other words, there was little concentration of stress. 4. ZOE was the most effective base material against hot stimuli under the amalgam and GI cement was the next. In case of gold inlay, GI cement was more effective than ZPC. 5. Composite resin has the small coefficient of thermal conductivity. So, composite resin filling is the most effective insulating material.

• BMB Reports
• /
• v.37 no.2
• /
• pp.254-259
• /
• 2004

The wild-type and temperature-sensitive (ts) repressor genes were cloned from the temperate mycobacteriophage L1 and its mutant L1cIts391, respectively. A sequencing analysis revealed that the $131^{st}$ proline residue of the wild-type repressor was changed to leucine in the ts mutant repressor. The 100% identity that was discovered between the two DNA regions of phages L1 and L5, carrying the same sets of genes including their repressor genes, strengthened the speculation that L1 is a minor variant of phage L5 or vice versa. A comparative analysis of the repressor proteins of different mycobacteriophages suggests that the mycobacteriophage-specific repressor proteins constitute a new family of repressors, which were possibly evolved from a common ancestor. Alignment of the mycobacteriophage-specific repressor proteins showed at least 7 blocks (designated I-VII) that carried 3-8 identical amino acid residues. The amino acid residues of blocks V, VI, and some residues downstream to block VI are crucial for the function of the L1 (or L5) repressor. Blocks I and II possibly form the turn and helix 2 regions of the HTH motif of the repressor. Block IV in the L1 repressor is part of the most charged region encompassing amino acid residues 72-92, which flanks the putative N-terminal basic (residues 1-71) and C-terminal acidic (residues 93-183) domains of L1 repressor.

• Journal of Sasang Constitutional Medicine
• /
• v.12 no.2
• /
• pp.8-8
• /
• 2000

1. Background and Purpose : ${\ulcorner}Dong\;Eui\;Sa\;Sang\;Sin\;Pyun{\lrcorner}$is the one of widely used medical books in the Sasang Constitucional Medicine Academy, but there was not enough study of the author. Through the research of the ${\ulcorner}Won\;Ji-Sang{\lrcorner}$, the Author, We highly intent to utilize the book ${\ulcorner}Dong\;Eui\;Sa\;Sang\;Sin\;Pyun{\lrcorner}$. 2. Methods : We arranged Won Ji-Sang's life style with investigation of the Won Yong-Sa(Won Ji-Sang's daughter), Survivors's verbal evidence and related books. 3. Results and Conclusion : 1) Won Ji-Sang's Childhood Name was "Ill Sang", Pseudonym was "Duck Pil", Pen Name was "Sung Am". He was born in "Bong Yang Myune, Je Chon Gune, Chung Buk" at 1885's June 1st of the lunar calendar and moved to "Yeo Ju Gune, Kyung Gi Do" at 1910's, and passed away in "Nae Sa Ree, Whung Chun Myune, Yeo Ju Gune, Kyung Gi Do" at 1962's June 2'nd of the lunar calender, when he was 78s. 2) The outline of philosophy of Won Ji-Sang's was based of "Wha Seo Doctrinal Faction's ideology", which was connected with Kim Pyong-Muk, Yu Jung-Kyo, Lee Gun-Won, Rue Rin-Suk. 3) ${\ulcorner}Dong\;Eui\;Sa\;Sang\;Sin\;Pyun{\lrcorner}$ was published in 1929's when Won Ji-Sang was 45s. However, we couldn't find out how Won Ji-Sang got to know Sasang Constitutional Medicine, and whether or not he had relation with Dong Mu Lee Je-Ma. 4) Won Ji-Sang's medical experience might be started before he was 45, and real medical treatment began when he was 66.

• Journal of Sasang Constitutional Medicine
• /
• v.28 no.2
• /
• pp.147-162
• /
• 2016

Objectives The objective of this study is to develop a taeeumin animal-experimental model induced lung fibrosis with Bleomycin and evaluate the effect on obesity in this animal-experimental model.Methods The subjects were divided into 3 groups : normal group, high fat diet(HFD) control group, and HFD group administered with bleomycin(n=10 per group). To develop taeeumin animal-experimental model with reduced respiratory metabolism, 8-week-old C57BL/6 mice were administered with 0.03ml solution of bleomycin 1U/ml dissolved in distilled water, intratracheal(IT), once. Then, the HFD control group and the experimental group were fed with high fat diet for 6 weeks. Airway hyperresponsiveness(AHR) to methacholine was measured at the 1st and 3rd week after bleomycin was administered. Food intake and body weight were measured at regular time weekly. After the final experiment, blood was gathered by cardiac puncture for bloodchemical examination and organs(liver, fatty tissue) were remoed, weighted, and mRNA was analyzed.Results and Conclusions Through the experiment, it was found that Bleomycin induced Taeeumin animal-experimental models have leptin resistace. In the experimental group administered with Bleomycin, fatty acid synthesizing gene expression increased and energy metabolizing gene expression decreased. As mRNA expression of adiponectin decreased, it was found that Taeeuim animal-experimental model is susceptible to metabolic syndrome and cardiovascular diseases.

• Journal of the Korean Institute of Rural Architecture
• /
• v.14 no.2
• /
• pp.1-10
• /
• 2012

The purpose of this study is to provide the method of saving the construction cost per unit area of the New Hanok using the inner space of a roof as a floor space with a structural modification of it's roof. The proportion of a roof of the Traditional Hanok accounts for about a half of it's elevation, so it is an essential element of it. But, compare to the whole construction cost of the Traditional Hanok, it costs over a half of expenses to build it. Recently, at the traditional building type, it is found that the inner space of a roof of it is used as a floor space with a structural modification of it's roof. It can be divided into two types, the storage type and the living type. The New Hanok at downtown can accommodate various new lifestyle, so the length of it's Yangtong is longer than that of the Traditional Hanok. When we adjust the proportion of the traditional Hanok to the New Hanok, the height of the column and the roof of the New Hanok becomes also higher than those of the traditional Hanok. So, using the upper part of the column and the roof of the New Hanok, we can make the inner space of a roof of the New Hanok as a floor space -like a bed room, tea room, personal work space and a storage- vertically connect with the 1st floor as the main living area. As a result, it is expected to save the unit construction cost of the New Hanok and has an extensity of space when we build the New Hanok at downtown.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.1
• /
• pp.16-19
• /
• 2006

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR characteristic of self-assembled 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto $pre-treatment(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1 mM/1 solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a 0.1 ${\mu}M/l$ solution of 4.4'-di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2,$ and finally blown dry with N_2. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2 V to +2 V with 298 K temperature. The vacuum condition was $6{\time}10^{-8}$ Torr. As a result, we found the NDR voltage of the 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate were $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ V(positive region). respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.11a
• /
• pp.181-184
• /
• 2001

Chemical Mechanical Polishing(CMP) of Shallow Trench Isolation(STI) structure in 0.18 m semiconductor device fabrication is studied. CMP process is applied for the STI structure with and without reverse moat pattern and End Point Detection (EPD) method is tested. To optimize the transistor properties related metal 1 parameters, we studied the correlation between CMP thickness of STI using high selectivity slurry, DOE of gate etch recipe, and 1st metal DC values. Remaining thickness of STI CMP is proportional to the thickness of gate-etch process and this can affect to gate profile. As CMP thickness increased, the N-poly foot is deteriorated, and the P-Poly Noth is getting better. If CD (Critical Dimension) value is fixed at some point, all IDSN/P values are in inverse proportional to CMP thickness by reason of so called Profile Effect. Weve found out this phenomenon in all around DOE conditions of Gate etch process and we also could understand that it would not have any correlation effects between VT and CMP thickness in the range of POE 120 sec conditions. As CMP thickness increased by 100 ${\AA}$, 3.2 u${\AA}$ of IDSN is getting better in base 1 condition. In POE 50% condition, 1.7 u${\AA}$ is improved, and 0.7 u${\AA}$ is improved in step 2 condition. Wed like to set the control target of CD (critical dimension) in gate etch process which can affect Idsat, VT property versus STI topology decided by CMP thickness. We also would like to decide optimized thickness target of STI CMP throughout property comparison between conventional STI CMP with reverse moat process and newly introduced STI CMP using high selectivity slurry. And we studied the process conditions to reduce Gate Profile Skew of which source known as STI topology by evaluation of gate etch recipe versus STI CMP thickness.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1844-1846
• /
• 2005

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR property of self-assembled 4,4- Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto pre-treatment$(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1mM/l solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a $0.1{\mu}M/l$ solution of 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2$, and finally blown dry with $N_2$. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2V to +2V with 299K temperature. The vacuum condition is $6{\times}10^{-8}$ Torr. As a result, we found the NDR voltage of the nitro-benzene is $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ (positive region), respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.639-642
• /
• 2005

HTS Transformer developing is developing a power distribution and transmission class HTS transformer that is one of the 21st century superconducting frontier projects. Therefore, we prepared the model, that is Z continuous winding from Kapton insulated Cu tape for a small simulated the HTS transformer. For the development of electrical insulation design of a HTS transformer with Z continuous winding, we have been discussed insulation composition and investigated breakdown characteristics such as breakdown of liquid $N_2(LN_2)$, polymer and surface flashover on FRP and breakdown-surface combination in $LN_2$. Also we have been designed and manufactured a bobbin that has spiral slot for the Z continuous winding. The Z continuous winding mini-model from Kapton film insulated Cu tape for simulated 22.9kV class HTS transformer has been constructed using 0.1 % breakdown strength obtained by Weibull distribution. The widing model was measured their insulation characteristics such as ac (50kV, 1min) and impulse (154kV, $1.2\times50{\mu}s$ full wave, 3 times) withstand test and its excellent performance was confirmed.

• Korean Journal of Veterinary Research
• /
• v.56 no.1
• /
• pp.9-14
• /
• 2016

The present study evaluated the effects of a mixture of Galla rhois and Cinnamomum cassia extracts (GCE) (1 : 1, w/w) on susceptibility to the colonization of Campylobacter (C.) jejuni in broilers. Eighty two-week-old broilers (n = 20 per group) were used to estimate the efficacy of GCE against C. jejuni infection via drinking water. Antibacterial activity testing revealed that the minimum bactericidal concentration of GCE against C. jejuni was 2.5 mg/mL. Broilers challenged with C. jejuni were administered 0.0 (Non-GCE), 2.5 (GCE-2.5), 5.0 (GCE-5.0) and 10.0 g/L (GCE-10) GCE for 7 days, and the cecal contents were collected from five broilers per group on the 1st, 3rd, 5th, and 7th day post-treatment. On day 3 post-administration, the number of C. jejuni in GCE-5.0 (p < 0.05) and GCE-10 (p < 0.01) was significantly decreased relative to Non-GCE, while on day 7 those in all GCE-treated groups were significantly decreased compared to the Non-GCE group (p < 0.001). Hematological and blood biochemical analysis revealed no significant differences in parameters between the Non-GCE and GCE-treated groups. Based on the results of the present study, GCE was identified as a safe and alternative candidate to suppress C. jejuni colonization in broilers.