• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.343-345
• /
• 2014

플래시 메모리의 인기가 증가하면서 스토리지 시스템의 변화를 가져왔다. 플래시 메모리 기반의 SSD(Solid State Disk)는 기존의 HDD(Hard Disk Drive)를 대체할 매체로 주목을 받고 있으며 HDD에 비해 훨씬 더 높은 대역폭, 랜덤 접근 성능 및 충격에 강한 장점들을 갖는다. 그러나 플래시 메모리는 HDD와 달리 덮어쓰기(In-Place update)가 불가능 하기 때문에, 데이터를 업데이트 하기 위해서는 해당영역을 지운 후 업데이트를 해야 하는 단점이 있다. 본 논문에서는 캐시 안에서의 거의 접근하지 않을 블락과 캐시로 들어가는 것을 막기 위한 기법을 제시한다. 이것은 캐시의 오염을 막고 더 오랜 기간 동안 캐시 안에서 인기 있는 블락 들을 유지하고 높은 히트율로 연결될 것이다. 또한 캐시 교체의 수를 줄임으로써 SSD의 쓰기를 감소할 것이고 그 결과 성능 뿐만 아니라 SSD의 수명도 연장 에도 도움이 될 것이다.

• Journal of KIISE:Computing Practices and Letters
• /
• v.15 no.9
• /
• pp.685-689
• /
• 2009

Flash memory has several features such as low~power consumption and fast access so that there has been various research on using flash memory as new storage. Especially the Solid State Disk which is composed of flash memory chips has recently replaced the hard disk. At present, SSD adopts the multi-channel and multi-way architecture to exploit advantages of parallel access. In this architecture, data are written on SSD in a unit of a superblock which is composed of multiple blocks in which some blocks are put together. This paper proposes two schemes of selecting, segmenting and re-composing victim superblocks to optimize concurrent processing when a buffer flush occurs. The experimental results show that 35% of superblock- based write operations is reduced by selecting victims and additional 9% by composition of superblock.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.462-465
• /
• 2011

낸드 플래시 메모리를 이용한 SSD(Solid-State Disk)는 빠른 속도와 저전력, 휴대성, 내구성 등의 특성을 가져 전통적인 저장 장치인 하드 디스크(HDD:Hard Disk Drive)를 대체할 차세대 저장 장치로 주목받고 있다. 그러나 저장 장치 성능 측정 도구는 기존의 하드 디스크의 특성을 기반으로 한 것들이 대부분으로 이를 통해 SSD의 성능을 측정하기엔 적합하지 않다. 특히 SSD는 하드 디스크에 비해 단위 공간 당비용이 수십 배 가량 높아 저장 공간의 효율적인 관리를 위해 컨트롤러(Controller)가 데이터 압축 기법을 사용하기도 하는데 이 압축 기법을 사용하는 컨트롤러에 따라 SSD는 다른 성능을 보인다. 또, 여러 가지 명령들이 한꺼번에 존재할 때 컨트롤러에 따라 이를 적절히 효율적으로 처리해주는 기능을 가지고 있는데 이 역시 SSD의 성능에 차이를 가져온다. 그러나 기존 저장 장치 성능 측정 도구는 압축 기법 유무를 판별할 수 있으면서 여러 명령들이 한꺼번에 존재할 때 SSD 성능의 차이를 파악할 수 있는 통합된 성능 측정 도구는 없다. 본 논문에서는 다양한 패턴에 따라 SSD의 특성을 측정할 수 있는 도구인 uFlip 성능 측정 도구를 기반으로, 압축 기법의 사용 유무를 판별할 수 있는 기능과 명령 큐 깊이(Command Queue Depth)에 따라 성능의 차이를 판별할 수 있는 기능을 추가하였고, uFlip 기반 수정된 성능 측정 도구로 몇 가지 상용 SSD의 성능을 평가하여 비교함으로써 추가된 기능들의 유무에 따라 SSD별로 다른 성능을 보이는 것을 확인할 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.57-64
• /
• 2008

In this paper, we propose a system-level simulator for the performance analysis of a Solid-State Disk (SSD) in PC environment by using TLM (Transaction Level Modeling) method. Our method provides quantitative analysis for a variety of architectural choices of PC system as well as SSD. Also, it drastically reduces the analysis time compared to the conventional RTL (Register Transfer Level) modeling method. To show the effectiveness of the proposed simulator, we performed several explorations of PC architecture as well as SSD. More specifically, we measured the performance impact of the hit rate of a cache buffer which temporarily stores the data from PC. Also, we analyzed the performance variation of SSD for various NAND Flash memories which show different response time with our simulator. These experimental results show that our simulator can be effectively utilized for the architecture exploration of SSD as well as PC.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.07a
• /
• pp.223-226
• /
• 2014

클라우드 컴퓨팅 및 모바일 통신 서비스의 사용량이 급격히 증가함에 따라 데이터가 기하급수적으로 증가하고 있다. 이러한 데이터를 저장하는 스토리지 장치로서 소비 전력이 작으며 우수한 데이터 접근 성능을 보이는 SSD(Solid State Disk)가 각광받고 있다. SSD는 다수의 NAND 플래시 메모리를 부착하고 호스트에서 요구하는 명령을 받아 수행하는 대용량 장치이다. 이러한 SSD는 비휘발성, 빠른 성능, 내구성, 저전력 등의 장점으로 인해 시장에서 널리 사용되고 있다. 그러나 이러한 SSD의 장점들에도 불구하고 읽기, 쓰기, 삭제 연산 수행 시간의 비대칭성과 불균등한 기본단위, 덮어쓰기 연산의 불가, 한정된 블록 당 삭제횟수 등의 NAND 플래시 메모리의 내재적 단점들이 존재한다. 그 중 NAND 플래시 메모리의 블록 당 한정된 삭제 횟수는 SSD의 수명에 영향을 끼치며 일정한 삭제 횟수를 초과하게 되면 안정성이 크게 떨어지게 되고 더 이상 사용이 불가능하게 된다. 따라서 본 논문에서는 클라우드 환경에서의 SSD에서 NAND 플래시 블록의 한정된 삭제 횟수에 따른 성능의 효율성을 향상시키기 위하여 중복 제거 기법을 적용한 SSD기반의 회복 효율성 최적화 시스템을 설계하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.8
• /
• pp.45-52
• /
• 2011

Flash memory is becoming widely prevalent in various area due to high performance, non-volatile features, low power, and robust durability. As price-per-bit is decreased, NAND flash based SSDs (Solid State Disk) have been attracting attention as the next generation storage device, which can replace HDDs (Hard Disk Drive) which have mechanical properties. Especially for the single package SSD, if channel number or FIFO buffer size per channel increases to improve performance, the size of a controller and I/O pin count will increase linearly with channel numbers and form factor will be affected. We propose a novel technique which can minimize form factor by optimizing the number of NAND flash channels and the size of interface FIFO buffer in the SSD. For SSD with 10 channel and double buffer, the experimental results show that buffer block size can be reduced about 73% without performance degradation and total size of a controller can be reduced about 40% because control block per channel and I/O pin count decrease according to decrease channel number.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.5
• /
• pp.41-47
• /
• 2010

This paper has proposed parallel BCH, one of error correction coding methods which has been used to NAND flash memory for SSD(solid state disk). To alter error correction capability, the proposed design improved reliability on data block has higher error rate as used frequency increasingly. Decoding parallel process bit width is as two times as encoding parallel process bit width, that could reduce decoding processing time, accordingly resulting in one half reduction over conventional ECC.

• The KIPS Transactions:PartA
• /
• v.19A no.1
• /
• pp.35-44
• /
• 2012

Traditional technologies that are used to improve the performance of hard disk drives show many negative cases if they are applied to solid state drives (SSD). Access time and block sequence in hard disk drives that consist of mechanical components are very important performance factors. Meanwhile, SSD provides superior random read performance that is not affected by block address sequence due to the characteristics of flash memory. Practically, it is recommended to disable prefetching if a SSD is installed in a personal computer. However, this paper presents a combinational method of a prefetching scheme and a memory management that consider the internal structure of SSD and the characteristics of NAND flash memory. It is important that SSD must concurrently operate multiple flash memory chips. The I/O unit size of NAND flash memory tends to increase and it exceeded the block size of operating systems. Hence, the proposed prefetching scheme performs in an operating unit of SSD. To complement a weak point of the prefetching scheme, the proposed memory management scheme adaptively evicts uselessly prefetched data to maximize the sum of cache hit rate and prefetch hit rate. We implemented the proposed schemes as a Linux kernel module and evaluated them using a commercial SSD. The schemes improved the I/O performance up to 26% in a given experiment.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.1
• /
• pp.15-22
• /
• 2017

Although there are many efficient techniques to minimize the speed gap between processor and the memory, it remains a bottleneck for various commercial implementations. Since secondary memory technologies are much slower than main memory, it is challenging to match memory speed to the processor. Usually, hard disk drives include semiconductor caches to improve their performance. A hit in the disk cache eliminates the mechanical seek time and rotational latency. To further improve performance a divided disk cache, subdivided between metadata and data, has been proposed previously. We propose a new algorithm to apply the SSD that is flash memory-based solid state drive by applying FTL. First, this paper evaluates the performance of such a disk cache via simulations using DiskSim. Then, we perform an experiment to evaluate the performance of the proposed algorithm.

• Smart Media Journal
• /
• v.4 no.2
• /
• pp.62-67
• /
• 2015

During several decades, hard disk drive(HDD) has been used in most computer systems as secondary storage and, however, the performance enhancement of HDD is limited by its mechanical properties. On the other hand, although the flash memory based solid state drive (SSD) has more advantages over HDD such as high performance and low noise, SSD is still too expensive for common usage and expected to take several years to replace HDD completely. Therefore, SSD caching mechanism using the SSD as a cache of high capacity HDD has been highlighted lately. The representatives of SSD caching mechanisms are typically bcache, dm-cache, Flashcache, and EnhanceIO. Each of them has its own internal mechanism and implementation, and this makes them to show their own pros. and cons. In this paper, we analyze the characteristics of each SSD caching mechanisms and compare the performance of them under various workloads. We expect that our contribution will be useful to enhance the performance of SSD caching mechanisms.