• 한국구조물진단유지관리공학회 논문집
• /
• 제26권4호
• /
• pp.1-10
• /
• 2022

이 연구에서는 강재 스프링을 감쇠 장치로써 사용 가능성을 평가하기 위해서, 강재 스프링의 인장 및 반복하중 실험을 수행하였다. 주요 실험변수는 강재의 종류(SAE9254 및 SS275), 스프링상수(700 N/mm, 1,000 N/mm 및 1,400 N/mm) 및 SAE9254의 열처리 유·무이다. 인장 실험 결과, SAE9254로 제작된 강재 스프링의 설계 스프링상수와 측정 스프링상수의 비는 1.08 ~ 1.13이며, SS275로 제작된 강재 스프링의 설계 스프링상수와 측정 스프링상수의 비는 0.86 ~ 0.97로 측정되었다. 항복 이후 열처리 유·무에 따른 SAE9254로 제작된 스프링의 하중-변위 관계 기울기는 약 240 ~ 251 kN/mm 및 92 N/mm 이었으며, SS275로 제작된 스프링의 하중-변위 관계 기울기는 거의 0이었다. 반복하중 실험 결과에서 모든 실험체는 KDS 41 17 00 (2019)에서 요구하는 변위 의존형 감쇠 장치의 적합 조건인 변위 원점에서의 하중 조건, 최대변위에서 하중 조건 그리고 에너지 소산 능력 조건을 모두 만족하였다. 그리고 열처리 안 된 SAE9254 및 SS275로 제작된 강재 스프링의 등가 감쇠비는 열처리 된 SAE9254로 제작된 스프링에 비해 각각 약 2.8배 및 1.9배 높은 수준이었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1992년도 특별강연 및 추계학술발표 개요집
• /
• pp.125-125
• /
• 1992

• Journal of Welding and Joining
• /
• 제27권5호
• /
• pp.34-41
• /
• 2009

Thermal and mechanical characteristics in dissimilar SS400-STS304 steel weldment have been investigated by 3D thermal elastic-plastic analysis. Moreover, the influence of welding residual stresses on the mechanical behaviour of this welded joint, by applying superimposed external load (tension load) was determined. The residual stresses obtained by numerical simulation were compared with the experimentally measured results. The FE results were in good agreement with the measured values. The mechanical test (hardness, tensile test) and metallurgical analysis was carried out to ensure the weld integrity. Hence, possibility of applying SS400-STS304 dissimilar steels in industries has been established.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1991년도 추계 총회 및 학술발표회
• /
• pp.41-42
• /
• 1991

본 연구는 활성슬러지공법의 침전조를 막으로 대체하여 고액분리를 효과적으로 수행하도록 하는 막분리 활성슬러지 공법에 관한 것이다. 이와같은 방법은 공정자체가 간략화되는 동시에 종래법에서 슬러지 팽화(bulking)등에 의해 침전조에서 SS carry-over, 슬러지 침강성 향상을 위한 고부하처리의 곤란성, 침전조 처리수에의 SS 유출등 고액 분리의 문제점을 해소하므로, 여과, 응집침전, 혹은 활성탄흡착등의 고도처리설비없이 양질이 처리수를 얻을 수 있다고 보고 되고 있다.

• 한국재료학회지
• /
• 제7권2호
• /
• pp.162-170
• /
• 1997

This study has evaluated the dissimialr weldability of Incoloy 825 Ni base alloy with a mild steel(SS41). Further a compatibility study of wrveral Ni base filler metals with the dissimilar joint between the two alloys was also included. The dissimilar weldability of Incoloy 825 with mild steel is strongly dependent upon the type of the filler metal used. Among the filler metals, ENiCrFe which has a chemical comosition similar to that of Incoloy 825 was found to be most compatible to the joint. In addition, a filler metal which showed a good cracing resistance in one dissimiar alloy combination was not necessarily graranteed to other combination. Microstructural examination with SEM, TEM and Auger revealed that the solidification cracking resestance of the dissimilar joint. between Incoloy 835 and SS41 was closely with the Ti+Nb content and with the content of a low melting eutectic phase of Laves relatibve to that of MC type phase.

• 한국해양공학회지
• /
• 제6권1호
• /
• pp.140-147
• /
• 1992

Corrsion fatigue test was performed under rotated bending in 3.5% NaCl aqueous solution having a temperature from 278.deg.K in order to investigate the effects of aqueous solution remperature on the corrosion fatigue fracture of raw material steel(SS41) and dual phase steel that was produced from SS41 by a series of heat treatment. Corrosion fatigue life decreases remarkably with increase in solution temperature or with decrease in stress level. The corrosion fatigue life and the crack propagation rate at 303.deg.K show the similar behaviors with those at 318.deg.K, which is assumed to be caused by concentration polarization phenamena. The number and the lengths of microcracks increase with increase in solution temperature, so they lead to the decrease in corrosion fatigue life.

• 한국생산제조학회지
• /
• 제6권4호
• /
• pp.124-129
• /
• 1997

The experimental investigation is mainly focused to detect tool wear by cutting signal measurements in multi-insert face milling SS 41 and STS 304. This research have investigated the effects on the insert number, which has relationship with mean-cutting force. AE(acoustic emission) signal, tool life and surface roughness in machining SS41 and STS 304. The cutting force and AE signal are monitored to analyse the cutting process, The surface roughness of the specimens machined by TiN coated tool with the various insert numbers measured at various cutting speeds, feed rates and depths of cut, The width of flank wear is also observed.

• 해양환경안전학회지
• /
• 제7권3호
• /
• pp.75-84
• /
• 2001

Ultrasonic vibrator is an equipment which atomizes and homogenizes the oils by breaking the oil particles with ultrasonic vibration cavity, and possibly improves the properties. There are various parameters on the effect of ultrasonic irradiation. Especially, this study intended to investigate the matrix structure of sludge oils and the erosion damages for horn disc SS41 according to the variation of the oil temperature and the immersing depth of horn disc. Sludge oils were irradiated with ultrasonic vibration and then observed the aspects of the change of oil particles. From these, the recycling feasibility of sludge oil for useable oil to be burnt was determined. The erosion damages for horn disc SS41 were examined with weight loss, weight loss rate and the irradiation time to max. erosion rate. These data will be useful to the development of ultrasonic breaking systems to recycle sludge oil and to consider a countermeasure for the prevention of erosion damages.

• 한국초지조사료학회지
• /
• 제20권1호
• /
• pp.41-48
• /
• 2000

This study was conducted to investigate the effects of the application rate of fermented swine manure and additional mineral fertilizer on productivity and nutritive value of corn(Zea mays L.) for silage. Swine manures used in this study were the compost of swine manure fermented with sawdust(SMFWS) and swine sluny(SS). This study was arranged in split-split plot design. Main plots were the types of swine manure, subplots were the application rate of swine manure, such as 100, 200 and 400kgN/ha, and sub-subplots were the application rate of mineral fertilizer, such as 50 and 100kgNiha. Corn DM(dry matter) and TDN(tota1 digestible nutrient) yields increased as application rate of SMFWS and SS increased. DM and TDN yields in SS treatments were higher than those in SMFWS treatments. The effect of fermented swine manure improved positively as application rate of urea increased. Net energy for lactation(NE1) and TDN content in corn decreased as application rate of SMFWS and SS increased, but crude protein(CP) content increased by the application of SMFWS and SS. NE, and TDN contents in SMFWS treatments were lower than those in SS treatments, but CP content in SMFWS was higher than that in SS. The growth and nutritive value of corn were improved by the application of mineral fertilizer. (Key words : Swine manure, Swine sluury, Compost, Zea may, TDN, Net energy)

• 비파괴검사학회지
• /
• 제18권5호
• /
• pp.365-372
• /
• 1998

초음파의 비선형 음향 효과를 계측하는 방법이 재료 열화의 효과적인 평가를 위한 새로운 접근법으로 제시되었다. 비선형 음향 효과란 음파가 전파함에 따라서 2차나 그 이상의 고조파 성분이 발생하는 것으로 설명될 수 있다. 따라서, 먼저 비선형 효과에 의해 고조파 성분이 발생하는 메커니즘을 비선형 탄성론에 기초를 두고 설명하였다. 다음으로, 열화된 재료에서 어느 정도의 고조파 성분이 발생하는지를 계측하기 위하여, 헤테로다인 신호 검출법을 이용하는 초음파 신호 분석 장치를 기초로 계측계를 구성하였으며, 인장하중과 피로하중을 가하여 인공적으로 열화시킨 SS41과 SS45 시편에 대해 실험하였다. 실험 결과 열화의 정도와 비선형 효과가 강한 상관성을 보였으며 이로부터 비선형 음향 효과가 재료 열화 평가를 위한 유용한 수단이 될 수 있음을 확인하였다.