• Journal of Powder Materials
• /
• v.30 no.5
• /
• pp.431-435
• /
• 2023

An irradiation hardening of Inconel 718 produced by selective laser melting (SLM) was studied based on the microstructural observation and mechanical behavior. Ion irradiation for emulating neutron irradiation has been proposed owing to advantages such as low radiation emission and short experimental periods. To prevent softening caused by the dissolution of γ' and γ" precipitates due to irradiation, only solution annealing (SA) was performed. SLM SA Inconel 718 specimen was ion irradiated to demonstrate the difference in microstructure and mechanical properties between the irradiated and non-irradiated specimens. After exposing specimens to Fe³⁺ ions irradiation up to 100 dpa (displacement per atom) at an ambient temperature, the hardness of irradiated specimens was measured by nano-indentation as a function of depth. The depth distribution profile of Fe³⁺ and dpa were calculated by the Monte Carlo SRIM (Stopping and Range of Ions in Matter)-2013 code under the assumption of the displacement threshold energy of 40 eV. A transmission electron microscope was utilized to observe the formation of irradiation defects such as dislocation loops. This study reveals that the Frank partial dislocation loops induce irradiation hardening of SLM SA Inconel 718 specimens.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.28.1-28.1
• /
• 2011

Radiation-induced displacement damage which has caused the increase of the dark current in the focal plane adopted in the Ozone Monitoring Instrument (OMI) was studied in regards of the primary protons and the secondaries generated by the protons in the orbit. By using the Monte Carlo N-Particle Transport Code System (MCNPX) version 2.4.0 along with the Stopping and Range of Ions in Matter version 2010 (SRIM2010), effects of the primary protons as well as secondary particles including neutron, electron, and photon were investigated. After their doses and fluxes that reached onto the charge-coupled device (CCD) were examined, displacement damage induced by major sources was presented.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.445-445
• /
• 2008

The behavior of ion trapping and migration in the yittria-stabilized zirconia pellets following high dose ion beam irradiation have been studied using SEM, EDX, and TGA. The ion beam was irradiated at room and higher temperatures and the differences in their results were interpreted in terms of dynamic annealing effects. The SRIM calculation was also performed to explain the cross sectional SEM image of the electrolytes.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.446-446
• /
• 2008

The effects of proton beam irradiation on the yittria-stabilized zirconia (YSZ) pellets have been investigated using SEM, EDX and TGA. 130 keV proton beam was irradiated on YSZ with high doses and annealed at various temperatures. The ion conductivity was also measured as a function of proton irradiation temperature and annealing temperature and the results were compared with their corresponding SEM images and the results of SRIM calculations.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.11
• /
• pp.143-151
• /
• 1996

Structural reaction injection molding을 이용한 복합재료의 제품 셩형을 위한 모델링 전략을 설명하였다. 사용된 모델은 두 평행한 원판형 mold에 있는 불 균일한 온도조건의 fiber preform을 통과하는 reactive srsin의 방사형 유동을 시뮬레이션 한다. 이러한 모델은 중요한 작동인자와 공정인자(주입온도, mold의 온도, 유량, cavity의 두께와 섬유의 조밀도)등이 유동속도, 변화(monomer, radical, inhibitor) 및 온도분포 등에 미치는 영향을 예견한다. 열전달과 질량전달 및 화학반응을 고려하여 모델을 개발하였다. 중요한 공정인자를 평가하기 위한 효울적인 공정창( process window)을 제공하는데 본 연구의 목적을 두었다. 2차원적인 Lagrangian 방식에 1차원적인 유동과 제한적인 2차원 열전달을 가정하여 모델을 유도하였고, 방정식은 implicit difference scheme에 의해 전개하였다. 이 모델은 Gonzalez-Romero의 실험 결과와 비교함에 의해 확인되었고, 실험결과가 잘 일치함을 보였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.96-120
• /
• 1996

현재 자동차용 복합재료를 생산하는데 유리한 제조방법으로는 압축성형 (Compression Molding), 액상성형(Liquid Molding), 인발성형(Pultrusion), 필라멘트 와인딩성형(Filament Winding)등이 있다. 압축성형은 현재 자동차 외장부품 성형에 널리 알려져 있는 SMC(Sheet Molding Compound)성형, 최근에 많은 연구가 되고 있는 LMPC(Low Pressure Molding Compound)성형, GMT(Glass Mat Reinforced Thermoplastics)성형 등이 있다. 액상성형은 RTM(Resin Transfer Molding)과 VARI (Vacuum Assisted Injection Molding), SRIM(Structure Reaction Injection Molding) 등이 있으며, 자동차 산업뿐만 아니라 일반 산업에서도 최근 많은 각광을 받고 있다. 그러므로 본 소고에서는 자동차용 복합재료의 제조에 널리 사용되는 성형공정에 대하여 간단히 살펴보고, 자동차 부품에 있어서의 복합재료 응용 현장과 최근 환경문제가 대두되면서 관심의 초점이 되고 있는 자동차용 복합재료 재활용 기술에 대하여 고찰하고자 한다.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.915-921
• /
• 2019

Radiation damage due to neutrons has been calculated in Ni-based alloys in Wolsong CANDU reactor environments. Two damage parameters are considered: displacement damage, and transmutation gas production. We used the SPECTER and SRIM computer codes in quantifying radiation damage. In addition, damage caused by Ni two-step reactions was considered. Estimations were made for the annulus spacers in a CANDU reactor that are located axially along a fuel channel and made of Inconel X-750. The calculation results indicate that the transmutation gas production from the Ni two-step reactions is predominant as the effective full power year increases. The displacement damage due to recoil atoms produced from Ni two-step reactions accounts for over 30% out of the total displacement damage.

• Current Optics and Photonics
• /
• v.3 no.2
• /
• pp.172-176
• /
• 2019

The work reports on the fabrication of an optical planar waveguide in the Nd:CNGG crystal by the 0.4-MeV hydrogen ion implantation with a fluence of $8.0{\times}10^{16}ions/cm^2$. The nuclear energy loss of the implanted hydrogen ions was derived by using SRIM 2013 code. The microscope image of the proton-implanted Nd:CNGG crystal cross section was captured by a metallographic microscope. The transmittance spectra were recorded before and after the ion implantation. The light intensity distribution of the planar waveguide at 632.8 nm was experimentally measured to validate its effect on one dimension confinement. The investigation shows that the proton-implanted Nd:CNGG waveguide is a candidate for an optoelectronic integrated device.

• Review of KIISC
• /
• v.33 no.6
• /
• pp.45-49
• /
• 2023

뉴스페이스 시대가 도래하고 양자컴퓨터로 기존 암호체계의 파훼가 수월해진 오늘날 인공위성의 보안모듈은 고성능의 상용 부품을 필요로 한다. 본 연구에서는 PE와 Al의 복합소재를 활용하여 내방사선 능력이 적은 상용 부품을 사용한 인공위성 탑재 보안모듈의 차폐 방안을 제시하였다. 기존의 Al 단일 소재로 제작된 차폐 하우징의 성능과 경제성을 개선하기 위해 PE와 Al의 복합소재를 연구하였다. 이를 위해 OMERE를 통해 저궤도 위성의 임무 환경을 분석하여 PE와 Al 복합소재의 우주방사선 차폐성능과 Al 단일 소재의 우주방사선 차폐성능을 PHITS와 SRIM을 이용하여 비교분석하였다. 연구 결과, PE와 Al의 복합소재를 활용한 차폐 하우징은 가볍고 경제적인 장점을 가지며, 성능도 크게 향상됨을 확인하였다. 이러한 연구 결과는 보안모듈에 한정되지 않고 위성 부품의 차폐에 새로운 가능성을 제시함으로써, 전반적인 우주산업 발전과 위성의 임무 수행 실패율 감소에 기여할 수 있다.

• Journal of the Korean Vacuum Society
• /
• v.14 no.2
• /
• pp.91-96
• /
• 2005

The silicon-on-insulator (SOI) wafer fabrication technique has been developed by using ion-cut process, based on proton implantation and wafer bonding techniques. It has been shown by SRIM simulation that 65keV proton implantation is required for a SOI wafer (200nm SOI, 400nm BOX) fabrication. In order to investigate the optimum proton dose and primary annealing condition for wafer splitting, the surface morphologic change has been observed such as blistering and flaking. As a result, effective dose is found to be in the $6\~9\times10^{16}\;H^+/cm^2$ range, and the annealing at $550^{\circ}C$ for 30 minutes is expected to be optimum for wafer splitting. Direct wafer bonding is performed by joining two wafers together after creating hydrophilic surfaces by a modified RCA cleaning, and IR inspection is followed to ensure a void free bonding. The wafer splitting was accomplished by annealing at the predetermined optimum condition, and high temperature annealing was then performed at $1,100^{\circ}C$ for 60 minutes to stabilize the bonding interface. TEM observation revealed no detectable defect at the SOI structure, and the interface trap charge density at the upper interface of the BOX was measured to be low enough to keep 'thermal' quality.