• 한국환경과학회지
• /
• 제2권4호
• /
• pp.347-356
• /
• 1993

The three natural zeolites collected in Yungil-gun, Kyungsangbuk-do, Korea, were analyzed by means of chemical wet methods and X-ray diffraction. The results indicated that the primary species of those zeolites were clinoptilolite mixed with heulandite, feldspar, montmorillonite, and quartz. These zeolites were chemically treated with NaOH, $\textrm{Ca(OH)}_2$, and HCl solution and their differences were also studied with X-ray diffraction method. The capabilities of removing $Cs^+$ and Sr^{2+}$ ions with chemically untreated zeolites, chemically treated zeolites, and also with synthetic zeolites were compared. The effect of other cations in removing Sr^{2+}$ ions was also studied. The experimental results showed that$Cs^+$ and Sr^{2+}$ ions could be removed up to 98% and 95% respectively out of 5 ppm with chemically untrearted natural zeolites. The treatment of 0.02N-$\textrm{Ca(OH)}_2$ and that of 2N-NaOH were most effective In removing $Cs^+$ and Sr^{2+}$ ions, respectively. It was found that the mountaintop of Sangjung 1-dong natural zeolite treated with 2N-NaOH was most efficient in removing Sr^{2+}$ ions mixed with other cations, compared with any other chemically treated and untreated natural zeolites in this work.

• 한국식품영양과학회지
• /
• 제27권6호
• /
• pp.1267-1272
• /
• 1998

In order to investigate the preventive and therapeutic of royal jelly on diabetes, the levels of blood glucose and serum lipids as well as the number of blood cells were determined in streptozotocin(STZ) diabetic rats. Rats were divided into seven groups. The RJ group was administered royal jelly and the STZ group was treated with streptozotocin to induce diabetes. To determine the preventive effect, diabetes was induced after administration of royal jelly for 2 weeks in group RS1/RS2. In group SR1/SR2 diabetic rats were administered royal jelly for 2 weeks to investigate the therapeutic effect. After 3 weeks, the body weight was reduced in STZ and SR1 groups and food intake was increased in the STZ, RS1 and SR1 groups. The blood glucose level was similar to the control group in the RJ, RS1 and RS2 groups and there was no effect in the other groups. The total lipid and triglyceride level were lower in the SR1 group as compared to STZ, and the total cholesterol level was higher in the STZ group. The index of atherogenesis was lower in the RJ and SR1 groups compared to the normal group. The number of red blood cells and hemoglobin was higher in the RJ and SR1 groups and the number of white blood cells was higher in the RJ and SR2 groups.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 추계학술발표강연 및 논문개요집
• /
• pp.162-162
• /
• 2003

최근에 산화물 인공격자의 우수한 특성으로 인하여 활발한 연구가 진행되고 있다. 본 연구에서는 펄스레이저 증착방법을 이용하여 산소분압 100mTorr, $650^{\circ}C$에서 LSCO/MgO 기판위에 La-50mol% 첨가된 SrTiO$_3$ (SLTO)와 SrTiO$_3$ 를 적층시켜 산화물 인공격자를 만들어 결정구조에 대하여 연구하였다. SrTiO$_3$ (STO)는 상온에서 3.904$\AA$인 cubic perovskite 구조를 가지고 있다. 일반적으로 La$^{3+}$ (1.14$\AA$)은 Sr$^{2+}$(1.12$\AA$)과 이온반경이 거의 유사하기 때문에 ABO 페로브스카이트 구조의 A자리에 치환될 것으로 기대되며 또한 Sr$^{2+}$ 자리에 La$^{3+}$ 가 치환되므로써 발생하는 charge compensation은 Sr 자리에 Vacancy 생성으로 판단된다. 인공격자의 성장확인을 위하여 SLTO와 STO를 10층씩 증착하여 XRD분석을 통하여 평가하여 보았다. 확인된 결과를 바탕으로 산화물 인공격자의 적층 주기를 SLTO layer를 한층으로 고정시키고 STO를 한 층에서 다섯 층까지 다양하게 변화시켰다. 본 연구의 목적은 산화물 인공격자에서 결정결함을 제어하여 소자에 응용할 수 있는 전기적 물성을 평가하기 위함이다. X-ray diffraction 결과 SLTO/STO 인공격자는 (001) 방향으로 우선배향하였으며 적층주기에 따라 격자상수의 변화를 보였다. AES의 depth profile 분석을 통하여 La의 분포를 확인하였으며, HRTEM 분석을 통하여 미세구조분석을 실시하였다.

• 한국세라믹학회지
• /
• 제38권3호
• /
• pp.251-255
• /
• 2001

SrTeO$_3$는 312$^{\circ}C$~485$^{\circ}C$의 제한된 온도범위에서 강유전성이 나타난다고 보고된 바 있다. 본 연구에서는 (Sr$_{1-x}$Pb$_{x}$)TeO$_3$(x=0~0.15) 고용체의 상형성 거동, 미세구조, 유전특성 등을 조사하였다. $700^{\circ}C$에서 하소하였을 때 질소 기체 분위기에서는 SrTeO$_3$상이 합성되었지만 공기 중에서는 더욱 산화된 상인 SrTeO$_4$상이 주된 상으로 존재하였다. (Sr$_{1-x}$Pb$_{x}$)TeO$_3$세라믹스에서 Pb 치환량이 0.15 몰까지 증가함에 따라 최적 소결온도가 80$0^{\circ}C$에서 $650^{\circ}C$로 감소하였고, 입자 크기는 증가하였으며, 유전상수가 13에서 25로 증가하였다. 또한, Pb 치환량이 0.05 이상일 때 강유전상이 안정한 온도 영역이 상온까지 확장되었다.

• 한국항해항만학회지
• /
• 제28권6호
• /
• pp.503-507
• /
• 2004

폐 처리된 스토론튬(Sr) 페라이트를 사용하여 GHz 대역용 전파흡수체를 개발하였다. 도전손실재인 카본의 첨가에 따른 전파흡수능의 변화와 시편 제작시 제작온도 변화에 따른 전파흡수능의 변화를 조사하였다. 이와 같은 실험을 실시하여 스토론튬(Sr) 페라이트 : 실리콘 (slicone)고무 : 카본 (carbon)=80 : 13.6 : 6.4 wt%인 시편을 7$0^{\circ}C$에서 제작하여 두께 2mm인 시편에 대하여 9.4 GHz에서 -24 dB, 두께 3mm인 시편에 대하여 5.5 GHz에서 -23 dB인 우수한 전파흡수체를 개발하였다.

• 센서학회지
• /
• 제17권3호
• /
• pp.203-209
• /
• 2008

Thick film formaldehyde (HCHO) gas sensors were fabricated by using $La_1_{-x}Sr_xMO_3$ (M= Fe, Co, Mn) ceramics. The powders of $La_1_{-x}Sr_xMO_3$ (M=Fe, Co, Mn) were synthesized by conventional solid-state reaction method. By using the $La_1_{-x}Sr_xMO_3$ (M=Fe, Co, Mn) paste, the thick-film formaldehyde sensors were prepared on the alumina substrate by silkscreen printing method. The experimental results revealed that $La_1_{-x}Sr_xMO_3$ (M= Fe, Co, Mn) ceramic powder has a perovskite structure and the thick-film sensor shows excellent gas-sensing characteristics to formaldehyde gas (sensitivity of $La_{0.8}Sr_{0.2}FeO_3$, S= 14.7 at operating temperature of $150^{\circ}C$ in 50 ppm HCHO ambient).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.400-403
• /
• 2004

The dielectric properties of $BaTiO_3/SrTiO_3$ multilayered thick films with printing times were investigated. $BaTiO_3/SrTiO_3$ thick films were deposited by Screen-printing method on alumina substrates. The obtained films were sintered at $1400^{\circ}C$ with bottom electrode(Pt) for 2hours. The structural and the dielectric properties were investigated for various printing times. The BST phase appeared in all of the $BaTiO_3/SrTiO_3$ mutilayered thick films. The $BaTiO_3/SrTiO_3$ multilayered thick film thickness, obtained by one printings, was $50{\mu}m$. The dielectric constant and dielectric loss of the $BaTiO_3/SrTiO_3$ multilayered thick film, obtained by five printings, were about 266, 0.8% at 1Mhz, respectively.

• Korean Journal of Acupuncture
• /
• 제30권4호
• /
• pp.281-288
• /
• 2013

Objectives : This study aimed to evaluate the effects of Stephaniae tetrandrae Radix Herbal-acupuncture(SR-HA) at KI10(Umgok) on nephritis induced by lipopolysaccharide(LPS) in rats. Methods : Male SD rats (n=32) were allocated to four groups; normal, LPS, saline, and SR-HA. The rats in the LPS, saline, and SR-HA groups were injected intra-peritoneally with LPS (2 mg/kg) to induce nephritis. The rats in the saline and SR-HA groups were treated with saline injection and SR-HA respectively at KI10 three times a week. To evaluate the effects of SR-HA at KI10 on nephritis in rats, the authors evaluated the numbers of WBC and neutrophils in blood, and the levels of creatinine, TNF-${\alpha}$, CINC-1 in serum, creatinine, total protein in urine and renal MPO. Results : SR-HA at KI10 significantly inhibited the increase of WBC and neutrophils in blood, TNF-${\alpha}$, CINC-1 in serum, creatine, total protein in urine and MPO in kidney of LPS-stimulated rats. Conclusions : SR-HA at KI10 may have therapeutic effects on nephritis in LPS-stimulated rats.

• 한국재료학회지
• /
• 제17권11호
• /
• pp.612-617
• /
• 2007

Both photoluminescence and thermal characteristics for $SrAl_2O_4:Eu^{+2},\;Dy^{+3}$ phosphors synthesized with various aluminum compounds (${\alpha}-Al_2O_3$, ${\gamma}-Al_2O_3$, amorphous-$Al_2O_3$ and $Al(OH)_3)$ were investigated in this study. The formation temperature of the host $SrAl_2O_4$ crystal is changed by these various aluminum compounds, as a result of the different thermal decomposition temperature of $SrCO_3$ phase. Among these compounds, the amorphous-$Al_2O_3$ phase shows the lowest formation temperature of the host $SrAl_2O_4$ crystal. The PL emission and excitation spectra of $SrAl_2O_4:Eu^{+2},\;Dy^{+3}$ phosphor are not affected by these aluminum compounds. After the removal of the Xenon lamp excitation (360 nm), however, the excellent longphosphorescent property of the phosphor is obtained by the amorphous-$Al_2O_3$ phase, although the decay time for all phosphors decrease exponentially.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.284-287
• /
• 2001

Multi-pole anisotropic Sr-ferrite sintered magnets has been studied by powder injection molding under applied magnetic field. The orientation of anisotropic Sr-ferrite powders higher than 80% during injection molding is achieved at the following conditions; apparent viscosity lower then 2500 poise in 1000 $sec^{-1}$ shear rate and applied magnetic field higher then 4 kOe. For the high fluidity and strength of injection molded compact, and the effective binder removal without defects during solvent extraction and thermal debinding, the optimum multi-binder composition is paraffin wax(PW)/carnauba wax(CW)/HDPE = 50/25/25 wt%. The rate of binder removal is proportional to the mean particle size of Sr-ferrite powders whereas it is inversely proportional to the content of Sr-ferrite powders and the sample thickness. The high magnetic properties of Sr-ferrite sintered magnets are; 3.8 kG of remanent flux density, 3.4 kOe of intrinsic coercivity, and 1.2 kG of surface flux density (l-mm-thick) in the direction of applied magnetic field.