• Journal of Auto-vehicle Safety Association
• /
• v.8 no.2
• /
• pp.11-16
• /
• 2016

The objective of this study was to construct the spring-mass models for the car-to-car offset frontal impact crash. The SISAME software was utilized to extract the spring-mass models using the data from the offset frontal crash test. The spring-mass model of the passenger car could effectively approximate the crash characteristics for the offset frontal barrier impact and the car-to-car offset frontal impact scenarios.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11b
• /
• pp.1025-1028
• /
• 2010

The bacteriological examination of spring water in Seogwipo-city was conducted. A total 11 spring water samples were performed from January to April, 2010. During the study period, the range of temperature was from 0.7 to $15.4^{\circ}C$, and result of the analyses showed that hydrogen ion concentrations (pH) for spring water was 0.33 to 7.8. salinity levels for sample average of 0.5 to 1.04‰, as the result of measuring dissolved oxygen (DO) for spring water showed that water dissolved oxygen were 1.02 to 7.14 mg/${\ell}$. The range of total coliform of spring water sample at 11 stations located in the designated spring water were <1.8~>1,600 MPN/100mL. And the range of geometric mean of total coliform were 1.9~117.1 MPN/100mL, The range of fecal coliform of spring water sample at 11 stations located in the designated spring water were <1.8~>1,600 MPN/100mL. And the range of geometric mean of fecal coliform were 1.8~68.1 MPN/100mL, respectively. Level of microbial contamination was examined in 11 samples for indication of bacterial contamination such as heterophic bacteria, EscherichiacoliO157;H7, salmonella spp., Vibrio parahaemolyticus, Staphylococcus aureus, Shigella spp. Were frequently detected from the spring water. Salmonella spp., S.aureus were detected in the range of $0{\sim}1.0{\times}10^1$, $0{\sim}3.0{\times}10^1$ CFU/ml, respectively. And the Escherichia coli O157;H7, Vibrio parahaemolyticus, Shigella spp. Were not detected from the examined spring water samples.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.7
• /
• pp.165-174
• /
• 2016

This paper examined opportunities and limitations of building an innovation cluster based on large scale research facilities (LSRF). For this purpose, success factors of innovation clusters were drawn from the literature, and categorized into knowledge & technology, transaction cost & agglomeration economies, hardware & software infrastructure, and government policy & strategy. Utilizing the categorization as an analytic framework, case studies of CERN and SPring-8 were performed. The results showed that there were various innovation processes for both cases, creating opportunities for developing innovation clusters in terms of knowledge and technology. On the other hand, in the case of SPring-8, there were disadvantages in the transaction cost and agglomeration economies, being located in a remote area due to the nature of the facility. Software & hardware infrastructure of SPring-8 limited its potential for innovation clusters. Regarding government policy and strategy, CERN, as a multinational institution, did not consider an innovation cluster in a specific region despite some advantages. An innovation cluster around SPring-8 was promoted by government policy despite some disadvantages. In other words, the advantages and disadvantages were enhanced or complemented by software & hardware infrastructure and government policy & strategy. Based on the results, this paper provides the implications for the Korean International Science-Business Belt.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1529-1534
• /
• 2018

We used in-situ synchrotron X-ray scattering to investigate phase transformations of octahedral tilted monoclinic $SrRuO_3$ (MSRO) and tetragonal SRO (TSRO) thin films on $SrTiO_3$ (STO) substrates. The octahedral tilted MSRO thin films were highly crystalline and the monoclinic distortion angle was $0.45^{\circ}$. The phase transition temperature from the MSRO to TSRO phase occurred at approximately $200^{\circ}C$ as a second order transition. Conversely, no phase transformations of the TSRO thin film occurred within the range from RT to $250^{\circ}C$. The octahedral $RuO_6$ rotation was strongly affected by the phase transformation in the SRO thin films.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.8
• /
• pp.659-663
• /
• 2014

Manufacturing processes of industrial tire are composed of mixing, extrusion, curing, trimming and inspecting. Among them curing is the most important process in the production of industrial tire. In this study the newly developed spring vent system was designed in order to solve rubber intrusion problem inside spring vent system in the curing process. After the experiment it is concluded that rubber intrusion was caused by angled stem head part. New spring vent system was manufactured and new design of spring vent system is proper to use for industrial tire curing process.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.6 no.3
• /
• pp.91-96
• /
• 2002

There are many methods for analyzing underground box structures. One is the method of Iterative removal of tensional spring. The other is the method of modeling of ground to 8-node elastic-plastic planar element. In this study, We use inelastic soil spring element for analyzing underground box structures. First, if N-value is over 50, the results of inelastic soil spring method is the same as the method of 8-node planar element in last stage. Second, as N is increasing, element forces in two methods are generally decreasing. Third, as N-value is increasing, element forces in two method are generally decreasing and displacement has decreasing incline. This is the same as the force-displacement curve of general underground structures.

• Journal of KSNVE
• /
• v.8 no.6
• /
• pp.1015-1022
• /
• 1998

This paper addresses the results of an experimental and analytical research of a helical coil spring subjected to dynamic behavior using space curve vector after considering elongation rate. Vibrations in helical coil spring can be divided into 3 modes such as vibrations of coil spring center axis' vertical direction. axis' horizontal direction, direction about center axis. However. these 3 modes are dependent one another and are characterized as coupled. The dependency was proved through both theoretically and experimentally analyzing the results of dynamic characteristics of coil spring center axis' vertical direction vibration by transfer matrix method using the governing equation of static equilibrium. Also this paper shows that pitch angle and active coils in coil spring affect the dynamic spring characteristics of the above 3 modes and are especially sensitive to the mode for vibration of axis' horizontal direction which most affects especially on dynamo stability of helical coil spring.

• Journal of Life Science
• /
• v.22 no.3
• /
• pp.324-331
• /
• 2012

Bacteriological examination of spring water in Jeju City was conducted. A total of 21 spring water samples were collected from January to April, 2010. During the study period, the range of temperature was 0.6 to $15.4^{\circ}C$, and the results of the analyses showed that hydrogen ion concentrations (pH) for spring water were 0.43 to 7.9. Salinity levels for the samples averaged from 3.0 to 1.64%, and levels of water-dissolved oxygen were 1.85 to 6.06 mg/l. The range of total coliforms in spring water samples at 21 stations located in the designated spring water were <1.8->1,600 MPN/100 ml. Furthermore, the range of geometric means of total coliforms was 9.9-151.6 MPN/100 ml, while the range of fecal coliforms in spring water samples at 21 stations located in the designated spring water area was <1.8->1,600 MPN/100 ml. Finally, the range of geometric mean of fecal coliforms was 3.1-151.6 MPN/100 ml. The level of microbial contamination was examined in 21 samples for indications of bacterial contamination such as heterotrophic bacteria, Escherichia coli O157:H7, Salmonella spp., Vibrio parahaemolyticus, Staphylococcus aureus, and Shigella spp. were frequently detected in the spring water. Salmonella spp., Shigella spp., Vibrio parahaemolyticus, and S. aureus were detected in the range of $0-0.5{\times}10^1$, $0-0.1{\times}10^1$, $0-0.1{\times}10^1$, and $0-0.3{\times}10^1$ CFU/ml, respectively, while E. coli O157:H7 was not detected in the examined spring water samples.

• Journal of Environmental Health Sciences
• /
• v.47 no.2
• /
• pp.182-191
• /
• 2021

Objective: This study was performed to detect indicator bacteria in drinking spring water samples in Gwangju City and to identify their genus using the VITEK-II system. Methods: The subjects were ten drinking spring water sites in Gwangju. Samples of spring water were taken every month from September 2019 to August 2020. We analyzed for the indicator bacteria Yersinia and microorganisms isolated from the spring water. Result: According to the research results on indicator bacteria, general bacteria in st1-st7 with sterilization facilities in the spring and summer were investigated in the range of 0-2 CFU/mL and 0-12 CFU/mL. In st9, where a sterilization facility was not installed, the most general bacteria were detected (160 CFU/mL). Total coliform and fecal coliform showed unsatisfied rates of 16.7 and 11.1% in spring and 14.7 and 11.8% in summer, respectively. The unsatisfied rates of total coliform for the designated and non-designated spring water facilities were 3.8 and 47.1%, respectively, and for the fecal coliform group they were 2.5 and 35.3%. The difference was confirmed according to the presence of a sterilization facility. Yersinia spp. was not detected in all drinking spring water. Forty-one strains in 25 species were isolated from ten sites. The results classified as major dominant species are Pseudomonas spp. 14.6%, Pantoea spp. 9.8%, Serratia spp. 9.8%, Acinetobacter spp. 9.8%, Citrobacter spp. 7.3%, Bordetella spp. 7.3%, Delftia spp. 4.9%, and Enterobacter spp. 4.9%. Conclusions: Based on the result that various species derived from fecal pollution and artificial pollutants were detected in the non-specified public spring water facilities that many people use, the facilities need institutional complements such as continuous management or complete shutdowns.

• Journal of the Korean Home Economics Association
• /
• v.30 no.4
• /
• pp.15-26
• /
• 1992

To investigate the seasonal effects on physiological responses of human body, clothing micro-climate, and subjective sensation, selected the cloths the most frequently dressed by men in spring and fall, and completed wearing trials in the climatic chamber. The results are as follows: 1. Rectal temp. ranged 36.8-37.1$^{\circ}C$ in either spring or fall, and no seasonal effect was found. 2. In skin temp., there was no seasonal effect in forehead, abdomen, and forearm. Skin temp. of chest was higher in spring than in fall. On the contrary, reverse was true in high and leg. Average skin temp. ranged 32.2-33.2$^{\circ}C$ in spring and 32.9-34.$0^{\circ}C$ in fall. 3. Average total sweat rate of spring, 79.4g/hr, was smaller than that of fall, 110.9g/hr. 4. Clothing temp. ranged 28.1-32.8$^{\circ}C$ in spring and 27.6-31.$0^{\circ}C$ in fall. Clothing humidity ranged 36.9-48.9% in spring and 38.2-51.1% in fall. Therefore, clothing microclimate was higher during fall than during spring. As results, skin temp. of the body core except chest did not show seasonal variation, but there was obvious seasonal variation in skin temp. of the extremities. Therefore, seasonal variation should be take into consideration in the experiments related to the cloth. In addition, standard for each season and the degree of work performance should be re-established in clothing micro-climate.