• Herbal Formula Science
• /
• v.27 no.2
• /
• pp.121-136
• /
• 2019

Objective : To investigate the effect of sihogayonggolmoryeotang (SY) on Single Prolonged Stress(SPS)-induced Post Traumatic Stress Disorder(PTSD). Method : To confirm the effects of SY on SPS-induced PTSD, Changes in body weight, sucrose intake open field test(OFT) and forced swimming test(FST)were observed. After behavioral tests, the plasma corticosterone(CORT) from the abdominal aorta, serotonin(5-HT) from prefrontal cortex, hippocampus, amygdala and striatum, norepinephrine(NE) and dopamine(DA) from hippocampus was measured by ELISA. mRNA expression of brain-derived neurotrophic factor(BDNF) and cAMP response element-binding protein(CREB) in hippocampus was measured by RT-PCR. Result : Weight change and sucrose intakes of rats in 14th day after the administration of SY were significantly increased in the SPS + SY450 group compared to the SPS group (p<0.05). Numbers of crossing in the central zone in the OFT were significantly increased in the SPS + SY450 group (p<0.05) compared with the SPS group. The immobility time of FST was significantly decreased in SPS + SY450 group compared with SPS group (p<0.05). The change of plasma CORT concentration was significantly decreased in SPS + SY450 group compared with that in SPS group (p<0.05). The change of 5-HT concentration was significantly increased in the SPS + SY450 group at hippocampus and amygdala compared with the SPS group (p<0.05). The concentration of DA was significantly increased in the SPS + SY450 group compared with the SPS group (p<0.05). The expression of BDNF and CREB were significantly increased in SPS + SY450 group compared with the SPS group (p<0.05). Conclusion : SY administration lowered the increase of CORT caused by PTSD and increases the 5-HT concentration and reversed the decreased expression of NE and DA and BDNF and CREB by PTSD. It is postulated that SY is effective in treating PTSD by restoring cognitive function, memory impairment, unstable emotional disturbances.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.280-281
• /
• 2011

Special Protection Scheme(SPS) that operates scenarios about faults beyond the normally protective action is wide system protection technology for the purpose of wide areas protection. Therefore, the SPS focuses on the improvement of the power supply capability by protecting the system rather than protecting the system equipments. Since the SPS requires emergency operation, the operation schedule is set up in advance by analyzing various scenarios. Since the SPS's action scheme uses generator tripping and is a classical method it is presently the most powerful one. However, as the setting of SPS is set to the most severe disturbance, the scheme tends to trip more generators than required to prevent fault propagation. It is highly likely that tripping generator units to prevent fault propagation would result in difficulty of system management and possibility of load shedding. Accordingly, it is desirable that generators are connected to the system within the range that ensures system stability and intelligent SPS is currently under development to solve the problem being stated. In this paper, as a part of developing the intelligent SPS, application of the fast-valving and braking resistor scheme to the generators is being proposed and analysed to reduce the number of tripped generators.

• Korean Journal of Materials Research
• /
• v.16 no.6
• /
• pp.341-345
• /
• 2006

[ $Ni_2Si$ ] mixed powders were mechanically alloyed by a ball mill and then processed by hot isostatic pressing (HIP) and spark plasma sintering (SPS). In the powder that was mechanically alloyed for 15minutes(MA 15 min), only Ni and Si were observed but in the powder that was mechanically alloyed for 30minutes(MA 30 min), $Ni_2Si$, Ni and Si were mixed together. Some of the MA 15 min powder and MA 30 min powder were processed by HIP under pressure of 150MPa at the temperature of $1000^{\circ}C$ for two hours and some of them were processed by SPS under pressure of 60 MPa at the temperature of $1000^{\circ}C$ for 60 seconds. Both methods completely compounded the powders to $Ni_2Si$. The maximum density of sintered lumps by HIP method was 99.5% and the maximum density of the sintered lump by SPS method was 99.3%. with the hardness of HRc 66 with the hardness of HRc 63. Therefore, the SPS method that can sinter in short time at low cost is considered to be more economical that the HIP method that requires complicated sintering conditions and high cost and the sintering can produce target materials in desired sizes and shapes to be used for thin film.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.1-7
• /
• 2019

Due to the highly concentrated power plants integrated through the limited transmission lines in Korea, a Special Protection System(SPS) has been applied to stabilize the power systems by instantly tripping the pre-determined generators in a large-scaled power plant when a fault occurs on the drawing transmission lines. Moreover, power outputs of those generators are constrained to avoid any activation of Under Frequency Load Shedding(UFLS) even after those generators are tripped by SPS action. For this, this paper proposes a method for calculating the required capacity of Energy Storage System(ESS) expected to relieve the operating constraints to generators using its fast response for controlling power system frequency. The proposed method uses the generator acceleration energy to derive the stable condition during the SPS action. In addition, its effectiveness is verified by the case studies adopting actual SPS operations in Korean power systems.

• Korean Journal of Materials Research
• /
• v.33 no.6
• /
• pp.242-250
• /
• 2023

Titanium, which has excellent strength and toughness characteristics, is increasingly used in the aerospace field. Among the titanium alloys used for body parts, more than 80 % are Ti-6Al-4V alloys with a tensile strength of 931 MPa. The spark plasma sintering (SPS) method is used for solidification molding of powder manufactured by the mechanical milling (MM) method, by sintering at low temperature for a short time. This sintering method avoids coarsening of the fine crystal grains or dispersed particles of the MM powder. To improve the mechanical properties of pure titanium without adding alloying elements, stearic acid was added to pure titanium powder as a process control agent (PCA), and MM treatment was performed. The properties of the MM powder and SPS material produced by solidifying the powder were investigated by hardness measurement, X-ray diffraction, density measurement and structure observation. The processing deformation of the pure titanium powder depends on the amount of stearic acid added and the MM treatment time. TiN was also generated in powder treated by MM 8 h with 0.50 g of added stearic acid, and the hardness of the powder was higher than that of Ti-6Al-4V alloy when treated with MM for 8 h. When the MM-treated powder was solidified in the SPS equipment, TiC was formed by the solid phase reaction. The SPS material prepared as a powder treated with MM 8 h by adding 0.50 g of stearic acid also formed TiN and exhibited the highest hardness of Hv1253.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.10
• /
• pp.1454-1459
• /
• 2017

In spite of continuous increase of electric power demand and new generation plants, it is very difficult to install new transmission line. Therefore, it comes to be difficult to operate the power system stable, so it is required to find another way to get new transmission capacity. Because HVDC transmission system installation is the one of the best option for us, we have undertake the HVDC project in mainland. Buckdangjin-Goduck HVDC project(500kV, 3GW) is currently under construction and Eastern Power HVDC project(500kV, 8GW) is under the study for technical specification. Both of them have the Run-up SPS function for taking action of 765kV Transmission line fault. The Run-up SPS function increases the active power output of the HVDC rapidly when the transmission line between the power plant and network is tripped, thereby preventing the generator from overspeed and improving the power system stability. In this paper, we propose MEAC(Modified Equal Area Criteria) method based on traditional EAC method to quantitatively evaluate the effect of the HVDC run-up SPS function on the power system stability improvement.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2000.04a
• /
• pp.11-11
• /
• 2000

Large-size ceramic/metal bulk FGMs have been fabricated on a recently developed and the world's largest Spark Plasma Sintering(SPS) systems, As a part of the development program for practical production processes and machines for FGMs by SPS, the processes, mechanical properties, dimensional size and shape effects, and production machine systems were investigated. In the past, $ZrO_{2}$/TiAI, $ZrO_{2}$/Ni, $Al_{2}O_{3}$/Ti, WC/Co, WC/Co/Steel, A1/P, Polymide, Cu/Polymide, nano-composites, porous and other combinations of bulk FGMs have already been processed using SPS. However, most of the specimen sizes were small, in a range of 20 to 30mm in diameter. Recently disk-shape sintered compacts with diameters of 100 and 150 mm, and thickness of approximately 15 and 17 mm, $ZrO_{2}$(3Y)/ stainless steel FGMs were homogenous consolidated in a shorter sintering time, while maintaining high quality and repeatability by utilizing a temperature gradient sintering method. The SPS heating up and holding time totaled less than one hour. Therefore, the SPS process in expected to find increased use in the fabrication of large-size FGMs as a new industrial processing technology. This paper introduces SPS systems, the processing principles, features and the characteristies of ceramic/metal bulk FGM.

• Korean Journal of Construction Engineering and Management
• /
• v.9 no.5
• /
• pp.186-193
• /
• 2008

The SPS, Strut as a Permanent System, method is widely adopted for the main structural member in addition to temporary strut function for the shuttering of excavation work. Although the SPS method has contributed to cost saving, time reduction, enhancement of structural stability, improvement of construction environment and so on at the building construction site, it caused the problems of increase of basement height and additional work for fire protection of steel structure. The increase of basement height caused the increase of shuttering depth and excavation, and the fire protection caused the additional cost as well as the deterioration of construction environment. In order to improve the problems, this paper is to propose a modularized hybrid structural system(HSD). The detail of the system is introduced and the structural performance and constructibility are proved through the experiment and site application.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1340-1352
• /
• 2008

In this study, S-wave velocity range is gauged in every field test method at the total 5 locations in the marine deposits in Incheon area. field test method is accomplished the SPT(Standard Penetration Test), CPT(Cone Penetration Test), SPS(Suspension PS Logger), SCPT (Seismic Cone Penetration Test) and so on. The S-wave velocity of SCPT in the downhole test method is measured lower than SPS logger at the N value > 15 range. But at the N value < 15 range, SPS logger and SCPT result is measured same. In this result, although the soil strength of the downhole test method increased, the rate of S-wave velocity is tend to be slowed. This result shows that the downhole test is difficult to apply at the place that the intensity of soil is more extreme and harder soil. And it shows that the existing Imai(1982) type that is mostly used within the country is not suitable for the marine deposits. Thus, the empirical formula that can show the range of S-wave velocity in each N value for domestic soil is needed.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.22 no.3
• /
• pp.1-10
• /
• 2009

Purpose : The objective of present study is to detect the effect of Sopungsan aqueous extracts (SPS) on the passive cutaneous anaphylaxis (PCA; type I allergic dermatitis) Method : 500, 250 and 125mg/kg of SPS were orally administered 12 hr-interval before antigen challenge (total 4 times administered). PCA reactions were induced using rat anti-ovalbumin (OVA) serum contain IgE (titer 1:32) as sensitization and OVA as antigen challenge. 30 min after antigen challenge, the diameter of blue-dye spots (evans blue) and leaked amount of dye were observed with histology and histomorphometry at the PCA induced sites. In addition, serum total IgE and histamine levels were also observed by ELISA, respectively. The effects of SPS were compared with dexamethasone 1mg/kg treated rats in the present study. Results : As results of PCA reaction, vasodilation related increase of diameter of blue-dye spot and amount of leaked dye were observed with swelling and edematous changes in the dermis of PCA induced sites. However, these changes on PCA reactions were dramatically and dose-dependently decreased by treatment of SPS as compared with vehicle control. In addition, serum elevations of IgE and histamine were also dose-dependently inhibited by treatment of SPS as compared with vehicle control respectively. The effects of SPS 500mg/kg were similar to that of dexamethasone 1mg/kg in the present study. Conclusion : Base on the results of the present study, it is concluded that SPS has favorable effect on the PCA-induced allergic dermatitis, and SPS 500mg/kg showed similar favorable effects as compared with dexamethasone 1mg/kg. The present findings demonstrate that SPS can be effective for the prevention and treatment of allergic dermatitis.