• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.9-14
• /
• 2002

A surface plasmon sensor has been fabricated for detection of concentration and refractive-index of a mixed solution. Based on the Kretschmann-Raether attenuated-total-reflection configuration, the sensor consists of 54 nm-thick Ag metal layer under a prism and a cell containing the mixed solution. We have observed a nonlinear refractive-index change as the ethanol-water concentration increased. The experimental results show us that the detection limit of the SPR sensor is 3$\times$10$^{-2}$ % in ethanol mass ratio. The concentration-to-index curve shows a linear increase in the range of ethanol concentration from 0% to 50%, but a nonlinearity is observed beyond 50%. We have modeled the nonlinearity and compared it with the experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.76-76
• /
• 2008

The resonance properties due to the surface plasmon(SP) excitation of metal nanoparticles make the nanocomposite films promising for various applications such as optical switching devices. In spite of the well-known ultra-sensitive operation of optical switches based on a guided wave, the application of nanocomposite film(NC) has inherent limitation originating from the excessive optical loss related with the surface plasmon resonance(SPR). In this study, we addressed this problem and present the experimental and theoretical analysis on the pump-probe optical switching in prism-coupled Au(1 vol.%):$SiO_2$ nanocomposite waveguide film. The guided mode was successfully generated using a near infrared probe beam of 1550 nm and modulated with an external pump beam of 532 nm close to the SPR wavelength. We extend our approach to ultra-fast operation using a pulsed laser with 5 ns pulse width. To improve the switching speed through the reduction in thermal loading effect accompanied by the resonant absorption of pump beam light, we adopted a metallic film as a coupling layer instead of low-index dielectric layer between the high-index SF10 prism and NC slab waveguide. We observed great enhancement in switching speed for the case of using metallic coupling layer, and founded a distinct difference in origin of optical nonlinearities induced during switching operation using cw and ns laser.

• 전기의세계
• /
• v.28 no.7
• /
• pp.60-66
• /
• 1979

In this paper we deal with a hardware redundency, using the replications of an original module to enhance the reliability of the system in view of static and dynamic redundancy. As results of the study the following facts have been proved that (1) if the mission time is small (T .neq. 0.5), the effect of spare modules cannot be expected significantly, (2) for the small mission time (0.1 .neq. T .neq. 0.3) the SPR system is more reliable than the other redundant systems. In addition to above facts, it is also proved that for the large mission time (T=1), the dynamic redundant system is more reliable than the static redundant system, and that the SR system is more reliable than the HR system in the dynamic redundant system.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.2
• /
• pp.258-264
• /
• 2015

To evaluate the influence of 3A zeolite on the flame retardant properties of poplar plywood. Ammonium polyphosphate (APP) and 3A zeolite were used as flame retardants to prepare plywood samples. The combustion properties, such as heat release rate (HRR), total heat release (THR), mean CO and $CO_2$ yield, smoke production rate (SPR), and total smoke production (TSP), were characterized by a cone calorimeter. A synergistic effect was observed between 3A zeolite and APP on reducing the HRR and mean CO yield. The probable flame retardation mechanism was proposed.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.49 no.1
• /
• pp.75-85
• /
• 2023

This study was conducted to assess the effect of heptapeptide, composed of seven amino acids, on the activation of human hair cells isolated from human hair follicles. We have confirmed that the heptapeptide could bind to Lgr5 from the results of surface plasmon resonance (SPR) analysis. Heptapeptide enhanced the proliferation of human hair follicle dermal papilla cells (HHFDPCs) in a dose dependent manner. It induced the protein level of nuclear β-catenin, and the expressions of β-catenin downstream target genes, including LEF1, Cyc-D1 and c-Myc, in HHFDPCs. Heptapeptide significantly induced the phosphorylation of Akt and ERK, and the mRNA expressions of growth factors, including hepatocyte growth factor (HGF), keratinocyte growth factor (KGF) and vascular endothelial growth factor (VEGF), in HHFDPCs. In addition, heptapeptide significantly increased mRNA expression levels of differentiation-related transcription factors of human hair germinal matrix cells (HHGMCs) and differentiation markers of human hair outer root sheath cells (HHORSCs). Additionally, we investigated the effect of heptapeptide on human hair follicle stem cells (HHFSCs) differentiation and found that the heptapeptide reduced the mRNA and protein levels of stem cell markers, while it increased those levels of differentiation markers. These results have indicated that the heptapeptide promotes proliferation or differentiation of various types of hair follicle constituent cells through the induction of Wnt/β-catenin signaling. From the results, we have suggested that the heptapeptide in this study could be applied as a new functional material for the improvement of hair growth and alopecia.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.112-117
• /
• 2017

This study demonstrated the emission of combustion gases of medium density fibreboard (MDF)s coated with piperazinomethyl-bis-phosphonic acid (PIPEABP), methylpiperazinomethyl-bis-phosphonic acid (MPIPEABP), N,N-dimethylethylenediaminomethyl-bis-phosphonic acid (MDEDAP), or bis-(dimethylaminomethyl) phosphinic acid (DMDAP). Each MDFs were coated in three times with a brush with 15 wt% aqueous solution of the phosphorus-nitrogen acid additives. After the specimens were dried at room temperature, the emission of combustion gases was tested using a cone calorimeter (ISO 5660-1, 2). The peak smoke production rate ($SPR_{peak}$) of the specimens coated with phosphorus-nitrogen acids was 18.5 to 41.5%, which is lower than that of using the virgin plate. However, the production of peak carbon monoxide ($CO_{peak}$) was 6.7 to 24.2% higher than that of using the virgin plate. Also, the peak carbon dioxide ($CO_{2peak}$) was 4.2 to 24.4% lower than that of using virgin plate. While the peak oxygen depletion rate was much higher than the level of 15%, which can be fatal to humans and the resulting risk could thus be eliminated. Overall, the combustibility of coated specimens was partially suppressed, but showed a negative effect on the reduction of carbon monoxide.

• Ceramist
• /
• v.22 no.3
• /
• pp.281-300
• /
• 2019

Surface enhanced Raman scattering (SERS) was first discovered in 1974 by an unexpected Raman signal increase from Pyridine adsorbed on rough Ag electrode surfaces by the M. Fleishmann group. M. Moskovits group suggested that this phenomenon could be caused by surface plasmon resonance (SPR), which is a collective oscillation of free electrons at the surface of metal nanostructures by an external light source. After about 40 years, the SERS study has attracted great attention as a biomolecule analysis technology, and more than 2500 new papers and 500 review papers related to SERS topic have been published each year in recently. The advantages of biomaterials analysis using SERS are as follows; ① Molecular level analysis is possible based on unique fingerprint information of biomolecule, ② There is no photo-bleaching effect of the Raman reporters, allowing long-term monitoring of biomaterials compared to fluorescence microscopy, ③ SERS peak bandwidth is approximately 10 to 100 times narrower than fluorescence emission from organic phosphor or quantum dot, resulting in higher analysis accuracy, ④ Single excitation wavelength allows analysis of various biomaterials, ⑤ By utilizing near-infrared (NIR) SERS-activated nanostructures and NIR excitation lasers, auto-fluorescence noise in the visible wavelength range can be avoided from in vivo experiment and light damage in living cells can be minimized compared to visible lasers, ⑥ The weak Raman signal of the water molecule makes it easy to analyze biomaterials in aqueous solutions. For this reason, SERS is attracting attention as a next-generation non-invasive medical diagnostic device as well as substance analysis. In this review, the principles of SERS and various biomaterial analysis principles using SERS analysis will be introduced through recent research papers.

• Journal of Sensor Science and Technology
• /
• v.19 no.4
• /
• pp.306-312
• /
• 2010

We have detected deoxynivalenol(DON) using a metal-oxide-semiconductor field-effect-transistor(MOSFET)-based biosensor. The MOSFET-based biosensor is fabricated by a standard complementary metal-oxide-semiconductor(CMOS) process, and the biosensor's electrical characteristics were investigated. The output of the sensor was stabilized by employing a reference electrode that applies a fixed bias to the gate. Au which has a chemical affinity for thiol was used as the gate metal to immobilize a self-assembled monolayer(SAM) made of 16-mercaptohexadecanoic acid(MHDA). The SAM was used to immobilize anti-deoxynivalenol antibody. The carboxyl group of the SAM was bound to the anti- deoxynivalenol antibody. Anti-deoxynivalenol antibody and deoxynivalenol were bound by an antigen-antibody reaction. In this study, it is confirmed that the MOSFET-based biosensor can detect deoxynivalenol at concentrations as low as 0.1 ${\mu}g$/ml. The measurements were performed in phosphate buffered saline(PBS; pH 7.4) solution. To verify the interaction among the SAM, antibody, and antigen, surface plasmon resonance(SPR) measurements were performed.

• Journal of Korean Society on Water Environment
• /
• v.27 no.6
• /
• pp.848-854
• /
• 2011

The objective of this research was to experimentally test the effect of rice straw mats on the reduction of runoff, sediment and discharge under a laboratory scale with different rainfall intensity and slopes. We used the small runoff plots of $1m{\times}1m{\times}0.65m$ ($L{\times}W{\times}H$) in size were filled with loamy sand. Experimental treatments were bare (control), rice straw mats + PAM(SP), rice straw mats + PAM + sawdust(SPS) and rice straw mats + PAM + rice husks(SPR); slope of 10% or 20%; and rainfall intensity of 30 or 60 mm/hr. Runoff volume and coefficient from covered plots were significantly lower than those from control plots. Under the 30 mm/hr and 10% simulations, average runoff coefficient of covered plots decreased more than 92%. Under 60 mm/hr and 20% simulations, the ratios were between 39.8~58.1%. Under the condition of 30 mm/hr rainfall and 10% slope, sediment discharge from covered plots was practically zero. And at 20% plots, sediment reduction ratio was more than 95%. Under the condition of 60 mm/hr rainfall, sediment reduction ratio of 10 and 20% plots ranged between 86.3~95.3% and between 79.8~86.5%, respectively. The differences in initial runoff time, runoff and sediment discharge among different cover materials were not significant. Rainfall intensity showed higher impact on initial runoff time, runoff, and sediment discharge than slope. It was also shown that even if runoff reduction by surface cover were low, sediment discharge reduction could be very significant and contribute to improve the water quality of streams in sloping agricultural regions. It was concluded that the use of straw mat and PAM on sloping agricultural fields could reduce soil erosion and muddy runoff significantly and help improve the water quality and aquatic ecosystem in receiving waters.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.3
• /
• pp.147-154
• /
• 2022

This study was conducted by directly sowing Asemi in late April at 30 × 10 cm intervals to determine the optimal irrigation method and irrigation amount to maximize the use of limited agricultural water and to increase the yield when growing rice in a desert climate. Conventional irrigation (Conv.), surface drip irrigation (Sur), subsurface drip irrigation (Sub.), and sprinkler irrigation (Spr.) methods were used. The following amounts of irrigation were tested based on field capacity (0.33 bar): 80% (V/V, FC80), 100% (FC100), and 120% (FC120), and data for 2 years were averaged. The total amount of irrigation by irrigation method was the lowest, at 627 ton/10 a, for Sub. irrigation with the FC80 treatment, which was 60.4% less than the amount of irrigation with the FC120 treatment (1,584 ton/10a). Sub. irrigation with the FC120 treatment gave the greatest amount of rice, at 665 kg/10 a, and this condition obtained a yield of 88.1% (754 kg/10 a) of the yield obtained with the conventional treatment. Therefore, when planting rice in a desert climate, subsurface drip irrigation at 120% of field capacity is considered advantageous to increase water use efficiency and crop yield.