• Applied Biological Chemistry
• /
• v.17 no.2
• /
• pp.125-137
• /
• 1974

The chemical structure of glycolipid of Selenomonas ruminantium cell wall was to be elucidated. The bacterial cells were treated in hot TCA and the glycolipid fractions were extracted by the solvent $CHCl_3\;:\;CH_3OH$ (1 : 3). The extracted glycolipids fraction was further separated by acetone extraction. The acetone soluble fraction was named as the spot A-compound. The acetone insoluble but ether soluble fraction was named as the spot B-compound. These two compounds were examined for elucidation of their chemical structure. The results were as follows: 1. The IR spectral analysis showed that O-acyl and N-acyl fatty acids were linked to glucosamine moiety in the spot A-compound. However in the spot B-compound in addition to O and N-acyl acids phosphorus was shown to be attached to glucosamine. 2. It was recognized by gas liquid chromatography that spot A compound contained beta-OH $C_{13:0}$ fatty acid in predominance in addition to the fatty acid with beta-OH $C_{9:0}$, whereas the spot B compound was composed of the predominant fatty acid of beta-OH $C_{13:0}$ with small amount of beta-OH $C_{9:0}$. 3. According to the paper chromatographic analysis of hydrazinolysis products of the spot A compound, a compound of a similar Rf value as the chitobiose was recognized, which indicated a structure of two molecules glucosamine condensed. The low Rf value of the hydrazinolysis product of the spot B-compound confirmed the presence of phosphorus attached to glucosamine. 4. The appearance of arabinose resulting from. ninhydrin decomposition of the acid hydrolyzate of the spot A compound indicated that the amino group is attached to $C_2$ of glucosamine. 5. The amount of glucosamine in the N-acetylated spot A compound decreased in half of the original content by the treatment. with $NaBH_4$, indicating that there are two molecules of glucosamines in the spot A compound. The presence of 1, 6-linkage between two molecules of glucosamine was suggested by the Morgan-Elson reaction and confirmed by the periodate decomposition test. 6. By the action of ${\beta}-N-acetyl$ glucosaminidase the N-acetylated spot A compound was completely decomposed into N-acetyl glucosamine, whereas the spot B compound was not. This indicated the spot A compound has a beta-linkage. 7. When phosphodiesterase or phosphomonoesterase acted on $^{32}P-labeled$ spot B compound, $^{32}P$ was not released by phosphodiesterase, but completely released by phosphomonoesterase. This indicated that one phosphorus is linked to glucosamine moiety. 8. The spot A compound is assumed to have the following chemical structure: That is glucosaminyl, ${\beta}-1$, 6-glucosamine to which O-acyl and N-acyl fatty acids are linked, of which the predominant fatty acid is beta-OH $C_{13:0}$ fatty acid in addition to beta-OH $C_{9:0}$ fatty acid 9. The spot B compound is likely to have the linkage of $glucosaminyl-{\beta}-1$, 6-glucosamine to which phosphorus is linked in monoester linkage. Furthermore both O-acyl and N-acyl fatty acids contained beta-OH $C_{13:0}$ fatty acid predominantly in addition to beta-OH $C_{9:0}$ fatty acid.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.49 no.4
• /
• pp.352-359
• /
• 2013

To estimate the mesh selectivity of gillnet for ocellate spot skate (Okamejei kenojei), the field tests were carried out 12 times with six different mesh sizes (121.2mm, 137.7mm, 151.5mm, 168.3mm, 178.2mm, 189.4mm) in the coastal waters of Taean, Chungcheongnamdo of Korea, 2010~2011. In the field tests, the total number of species was 31, and that of catch was 1,410 and the total weight was 618,006g. The number and weight of ocellate spot skate which is main target in this study were 1,004 and 434,592g, respectively. The catch in number of ocellate spot skate occupied about 71.2% in total catch. The others of catch species were marbled sole (8.4%), sea raven (4.4%), japanese swimming crab (4.2%) and flatfish (4.1%) and so on. The range of body disk width (DW) of ocellate spot skates which were caught in this study was 15.2~35cm and the mode was 27~29cm. The estimation equation of mesh selectivity using the extended Kitahara's method was expressed as s $(R)=s(DW/m)={\exp}\{(-0.56R^3-1.80R^2+12.96R-9.99)-4.26\}$. The optimum value of DW/m for 1.0 of retention probability in this estimation equation was estimated 1.899 and DW/m was estimated to be 1.194, 1.314, 1.395, 1.461 and 1.520 when the retention probability were 0.1, 0.2, 0.3, 0.4 and 0.5, respectively. When applied to the retention probability of 0.5, the optimum mesh size was estimated to be 177.0mm on first maturity disk width 26.9cm of ocellate spot skate.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.3
• /
• pp.387-392
• /
• 2003

The mechanical behavior of two rectangular spot-welded plates under bending is investigated in detail. The equivalent thickness of spot-welded plates is introduced in this study and used in explaining the results. The focus of the analysis is to evaluate the effect of spot-welding from the view point of equivalent thickness. The investigation of deflection has been performed as comparing the result from finite element analysis with the measured data of the spot-welded plates for various parameters, such as aspect ratio, area ratio, and distance ratio of spot-welding points. The effect of spot-welding is as large as 62%(at r=1.0) when the area ratio of spot-welding point is just 4.52%.

• Restorative Dentistry and Endodontics
• /
• v.37 no.4
• /
• pp.236-239
• /
• 2012

Although several methods including composite resin restoration and microabrasion have been used for management of white spot lesion, tooth jewelry can be considered as another noninvasive option. This case report describes the management of white spot lesions by using tooth jewelry. This report also highlights the patients' preference for tooth jewelry as an esthetic concern.

• Journal of Welding and Joining
• /
• v.12 no.4
• /
• pp.127-140
• /
• 1994

Resistance spot welding has been widely used in the sheet metal joining processes because of its high productivity and convenience. In the resistance spot welding processes the size of molten nugget is a criterion to assess weld quality. Many research have founded on measuring weld nugget size at the same time monitoring welding process parameters such as dynamic resistance and electrode movement. With increasing demand of energy saving, many efforts were made to employ aluminum alloys that are lighter than steel and have relatively equivalent strength to steel in the automobile industry. In this paper, spot weldability of aluminum alloys for various welding conditions were examined by series of experiments. One of the 6000 series (Mg-Si) aluminum alloy, 6383-T4 was chosen, which is currently considered as a substitute for the galvanized steel. Dynamic resistance, electrode movement and corresponding nugget size were observed and compared to the case of steel. Finally, resistance spot welding of dissimilar material (galvanized steel-aluminum alloy) was attempted.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.156-162
• /
• 2013

This paper measures the hot spot temperatures in a single-phase, 154 kV, 15/20 MVA power transformer filled with natural ester fluid using optical fiber sensors and compares them with those calculated by conventional heat run tests. A total of 14 optical fiber sensors were installed on the high-voltage and low-voltage windings to measure the hot spot temperatures. In addition, three thermocouples were installed in the transformer to measure the temperature distribution during the heat run tests. In the low-voltage winding, the hot spot temperature was $108.4^{\circ}C$, calculated by the conventional heat run test. However, the hot spot temperature measured using the optical fiber sensor was $129.4^{\circ}C$ between turns 2 and 3 on the upper side of the low-voltage winding. Therefore, the hot spot temperature of the low-voltage winding measured using the optical fiber sensor was $21.0^{\circ}C$ higher than that calculated by the conventional heat run test.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.223-229
• /
• 2011

In this study, two types of LED spot light with the development of the current broadcast studio-light is installed in the space being used in many products, companies in the UK Arri-650W, 1000W Fresnel spot light and illumination, color temperature and color rendering comparison of data measured compared with the target of the shooting and the color rendition on images was measured by comparing the color. In the future, broadcast - shooting LED spot light replacing whether the available studies on the performance evaluation were analyzed. Experimental evaluation of a replacement for halogen lights in LED Spot light is potential was confirmed.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.24 no.2
• /
• pp.153-158
• /
• 2006

A new High Resolution Geometry or HRG imaging instrument is developed by CNES to be carried on-board SPOT 5. The HRG instrument offers a higher ground resolution than that of the HRV/HRVIR on SPOT 1 - 4 satellites. The field width of HRG is 60 km, same as SPOT constellation. With two HRG instruments, a maximum swath of 120 km at 5 m resolution can be achieved. The generation of Digital Elevation Models (DEMs) from satellite stereo images scores over conventional methods of DEM generation using topographic maps and aerial photographs. This global availability of satellite images allows for quicker data processing for an equivalent area. In this study, a HRG stereo images of SPOT 5 over JECHEON has been used with Leica Photogrammetry Suite OrthoBASE Pro tool for the creation of a digital elevation model (DEM). The extracted DEM was compared to the reference DEM obtained from the contours of digital topographic map.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.9 no.1
• /
• pp.16-24
• /
• 1996

In order to satisfy the demand of good treatment of Oriental medicine, I investigated many books mentioned about Liver spot. The results were as follows: 1. They have called the Liver spot many other terms in the oriental medicine. 2.. The Liver spot is facial disease, so it is deeply related with yang-myong kyong(陽明經) 3. As the external cause of the Liver spot, wind and fire evil have been emphasized. 4. Intoxication of bud of banha(半夏) poison and alcohol absorption can be one of the causes. 5. As the internal cause of the Liver spot, each other vapour asthenia fever from constipation seven modes of emotion, asthenia of the spleen and stomach and insufficiency of kidney-yin(腎陰) 6. Nowadays, the deficiency of kidney-yang(腎陽) is also included as the cause of the Liver spot. 7. Many oriental doctors have talked about the relationship between the Liver spot and women, but I can't find any concrete talking about the relationship between menstration and the Liver spot, pregnancy and the Liver spot. 8. They have administrated many other herb medicines for the treatment the Liver spot.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.551-554
• /
• 2004

LED는 소비전력이 적고, 수명이 길어 LCD Backlight 용 광원으로 주목받고 있다. 현재 휴대전화기용 LCD에 많이 사용되고 있는 소형 LED Backlight의 경우 입광부에 LED의 개수가 육안으로 확인 가능할 정도의 Hot Spot이 존재한다. 이에 본 논문에서는 Reflector를 사용하여 광의 손실을 줄이고 도광판의 입광부에 산란 패턴을 설계하여 적용함으로써 도광판 입광부에서 122.7%의 휘도 상승효과와 73.4%의 휘도 균일도를 얻을 수 있었으며 이로 인해 Hot Spot을 감소시킬 수 있었다.