Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

The Effect of the Area Ratio and the Distance Ratio on Bending Stiffness of Two Rectangular Spot-Welded Plates

면적비와 거리비가 점용접된 두 사각평판의 굽힘강성에 미치는 영향

  • 한근조 (동아대학교 기계산업시스템공학부) ;
  • 안성찬 (동아대학교 대학원 기계공학과) ;
  • 심재준 (동아대학교 대학원 기계공학과) ;
  • 한동섭 (동아대학교 대학원 기계공학과)
  • Published : 2003.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

The mechanical behavior of two rectangular spot-welded plates under bending is investigated in detail. The equivalent thickness of spot-welded plates is introduced in this study and used in explaining the results. The focus of the analysis is to evaluate the effect of spot-welding from the view point of equivalent thickness. The investigation of deflection has been performed as comparing the result from finite element analysis with the measured data of the spot-welded plates for various parameters, such as aspect ratio, area ratio, and distance ratio of spot-welding points. The effect of spot-welding is as large as 62%(at r=1.0) when the area ratio of spot-welding point is just 4.52%.

Keywords

References

  1. Deng. X.. Chen. W. and Shi, G.. 2000. 'Three-Dimensional Finite Element Analysis of the Mechanical Behavior of Spot Welds,' Finite Elements in Analysis and Design, Vol. 35, pp. 17-39 https://doi.org/10.1016/S0168-874X(99)00053-0
  2. Lee, J. K.. Seo, S. I., Jang, S. K. and Cha, B. W., 1996, 'A Study on the Optimum Welding Conditions for Reducing the Depth of Indentation of Surface in Spot Welding,' Jour. of KWS, Vol. 14, No.2, pp. 57-64
  3. Han. G.. Ahn, S .. Shim, J., Lee, H. and lang, H., 2001. 'The Effect of the Area Ratio and Change of Location on the Buckling Stress of Two Rectangular Plates Spot-welded,' Jour. of KSPE. Vol. 18, No. 12, pp. 54-59
  4. Ugural. A. C, 1981. 'Stresses in Plates and Shells,' McGraw-Hill. pp. 153-173
  5. Demeter G. Gertis and Chin T. Lee, 1993, 'Elastic and Inelastic Analysis of Variable Thickness Plates, Using Equivalent System,' Mech. Struct. & Mach.. Vol. 12. No. 2, pp. 201-236

Cited by

  1. The deflection coefficient of a rectangular plate reinforced in the middle vol.10, pp.2, 2009, https://doi.org/10.1007/s12541-009-0030-3