• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.127-133
• /
• 2013

In this paper, the authors designed a surface permanent magnet (SPM)-type vernier motor whose maximum output is more than 5.2 kW, whose power factor at 4 kW is more than 90%, and whose efficiency at 4 kW is 85% under the conditions that the operating voltage, frequency, and synchronous speed are 400 V, 50 Hz, and 100 min-1, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.64-66
• /
• 2004

Several techniques have been adopted in motor design of interior permanent magnet (IPM) type brushless DC (BLDC) motor to minimize cogging torque. IPM type motor has better ability in the centralization of flux than surface-mounted permanent magnet (SPM) type BLDC motor. So, the structure of IPM type BLDC motor has high saliency ratios that produce additional torque. However, this structure has a significant cogging torque that generates both vibration and noise. This paper describes new technique of the flux barriers design for reduction of cogging torque of IPM type BLDC motor. To reduce the cogging torque, flux barriers are applied in the rotor. Changing the number of barrier, the cogging torque is analyzed by finite clement method(FEM).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.77-79
• /
• 2004

This paper presents a design and characteristics analysis of interior permanent magnet (IPM) type BLDC motor for electric vehicle. In order to design of IPM type BLDC motor, surface mounted permanent magnet(SPM) type BLDC motor is used as the initial design model. According to the size of permanent magnet, the steady state characteristics is analysized by equivalent magnetic circuit method. The characteristics analysis results of the designed motor is compared with the experimental results.

• 전력전자학회논문지
• /
• 제9권2호
• /
• pp.112-118
• /
• 2004

본 논문은 선박 추진 장치를 위한 저속 영역에서 최대 토크를 내는 대용량 BLDCM(Brushless DC motor)의 설계에 관한 연구이다. 기존의 추진 장치용 모터는 직류기 및 권선형 유도 전동기 등을 사용함으로 인하여 유지 보수가 필요하였다. 본 논문에서는 유지 보수가 필요 없고 저속에서 큰 토크를 발생 할 수 있는 BLDCM 설계를 하였다. 설계시 출력 리플 및 진동, 소음을 유발하는 코깅 토크 저감을 고려하기 위해 설계변수로 공극길이와 자극 각 등을 취하여 이의 변화에 대한 최저 코깅 토크를 가지는 최적형상을 구하고, 전동기 특성을 FEM과 Maxwell stress tensor법을 이용하여 해석하였다. 최저의 코깅 토크를 가지며 저속영역에서 최대 토크를 발생 할 수 있는 선박 추진 장치용 SPM type의 BLDCM을 설계하였다.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제3권4호
• /
• pp.398-402
• /
• 2014

This paper presents the comparison study of permanent magnet (PM) eddy current of concentrated winding type surface permanent magnet synchronous motor (SPMSM) with different rare-earth magnet shapes. The fractional slot winding having 10 poles and 12 slots is studied. The PM eddy current is analyzed to compare for each shape by 2 dimensional (2D) finite element analysis (FEA). The eddy current and their loss of particular position of PM as well as their distributions are displayed for each model. The effect of partly enlarged air-gap made by PM shape to PM eddy current is compared.

• Journal of Electrical Engineering and Technology
• /
• 제12권2호
• /
• pp.769-777
• /
• 2017

The research of air gap flux density has a significant effect on predicting and optimizing the structure parameters of electrical machines. In the paper, the air gap coefficient, leakage flux factor and saturation coefficient are first analytically expressed in terms of motor properties and structure parameters. Subsequently, the analytical model of average air gap flux density for surface-mounted permanent magnet synchronous machines is proposed with considering slotting effect and saturation. In order to verify the accuracy of the proposed analytical model, the experiment and finite element analysis (FEA) are used. It shows that the analytical results keep consistency well with the experimental result and FEA results, and the errors between FEA results and analytical results are less than 5% for SPM with high power. Finally, the analytical model is applied to optimizing the motor structure parameters. The optimal results indicate that the analytical calculation model provides a great potential to the machine design and optimization.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2761-2763
• /
• 1999

In this paper, we analyzed the characteristics of the detected EMF signals used to detect the rotor position in the IPM(Interior Permanent Magnet) BLDC motor and SPM (Surface Permanent Magnet) BLDC motor. The position sensing signal, in the IPM BLDC motors, advances the real rotor position due to the variation of the rotor inductances. This fact was verified by the simulation and experiment.

• 한국자동차공학회논문집
• /
• 제21권3호
• /
• pp.165-173
• /
• 2013

Core loss has a major effect on heat generation in synchronous motors with surface-mounted permanent magnets (SPMs). It is essential to perform heat transfer analysis considering core loss in SPM because core loss is seriously affected by torque and speed of motors. In the present study, mechanical loss, core loss and coil loss are evaluated by measuring input and output energies under various driving conditions. For a better understanding heat transfer paths in synchronous motors, we developed a lumped thermal system analysis model. Subsequently, heat transfer analysis has been performed based on acquired energy loss, temperature data and thermal resistance with three types of SPM. It is shown that the torque constants decrease by Max. 10% as speed increase. At the rated torque, the core loss is Max. 10.9 times greater than the coil loss and the hysteresis loss of magnets is dominant in total loss.

• 전력전자학회논문지
• /
• 제18권6호
• /
• pp.523-529
• /
• 2013

A sensorless speed control of a permanent magnet synchronous motor(PMSM) which utilizes MRAS based scheme to estimate rotor speed and position is presented. Considering an error between real and estimated rotor position values, a state equation of PMSM in the synchronous d-q reference frame is represented. A state equation of model system which uses estimated speed and nominal parameter values is expressed. To minimize the errors between the derivatives of d-q axis currents of real and model system, MRAS based adaptation mechanisms for the estimation of rotor speed and position are derived. On the other hand, for the acceleration stage of motor just before the sensorless operation, an acceleration scheme using only d-axis current control is proposed. To show the validity of the proposed scheme, experimental works are carried out and evaluated. During acceleration stage, the acceleration scheme using only d-axis current command shows good acceleration performance and controlled current level. For the sensorless operation, at low speed (5% of rated speed), a good performance is observed.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.1960-1966
• /
• 2014

The rotor overhang is used to enhance the air-gap flux and improve the power density. Due to the asymmetry in the axial direction caused by the overhang, a time consuming 3D analysis is necessary when designing a motor with overhang. To solve this problem, this paper proposes an equivalent magnetic circuit model (EMCM) which takes account overhang effects without a 3D analysis by using effective air-gap length. The analysis time can be reduced significantly via the proposed EMCM. A reduction in the analysis time is essential for a preliminary design of a motor. In order to verify the proposed model, a 3-D finite-element method (FEM) analysis is adopted. 3-D FEM results confirm the validity of the proposed EMCM.