• Nuclear Engineering and Technology
• /
• v.49 no.6
• /
• pp.1287-1300
• /
• 2017

Based on the observation that ignoring the angle dependency of multigroup resonance cross sections within a fuel pellet would result in nontrivial underestimation of the spatial self-shielding of flux, a parametrized spectral superhomogenization (SPH) factor library (PSSL) method is developed as a practical means of resolving the problem. Region-wise spectral SPH factors are calculated by the normal and transport corrected SPH iterations after ultrafine group slowing down calculations over various light water reactor pin-cell configurations. The parametrization is done with fuel temperature, U-238 number density, fuel radius, moderator source represented by ${\Sigma}_{mod}V_{mod}$, and the number density ratio of resonance nuclides to that of U-238 in a form of resonance interference correction factors. The parametrization is successful in that the root mean square errors of the interpolated SPH factors over the fuel regions of various pin-cells are within 0.1%. The improvement in reactivity error of the PSSL method is shown to be superior to that by the original SPH method in that the reactivity bias of -200 pcm to -300 pcm vanishes almost completely. It is demonstrated that the environment effect takes only about 4% in the reactivity improvement so that the pin-cell based PSSL method is effective in the assembly problems.

• BMB Reports
• /
• v.41 no.2
• /
• pp.119-125
• /
• 2008

Our previous work confirmed that Sph2/LA1029 was a sphigomyelinase-like hemolyisn of Leptospira interrogans serogroup Icterohaemorrhagiae serovar Lai. Characteristics of both hemolytic and cytotoxic activities of Sph2 were reported in this paper. Sph2 was a heat-labile neutral hemolysin and had similar hemolytic behavior as the typical sphingomyelinase C of Staphylococcus aureus upon sheep erythrocytes. The cytotoxic activity of Sph2 was shown in mammalian cells such as BALB/C mouse lymphocytes and macrophages, as well as human L-02 liver cells. Transmission electron microscopic observation showed that the Sph2 treated BALB/C mouse lymphocytes were swollen and ruptured with membrane breakage. They also demonstrated condensed chromatin as a high-density area. Cytoskeleton changes were observed via fluorescence confocal microscope in Sph2 treated BALB/C mouse lymphocytes and macrophages, where both cytokine IL-$1{\beta}$ and IL-6 were induced. In addition, typical apoptotic morphological features were observed in Sph2 treated L-02 cells via transmission electron microscope and the percentage of apoptotic cells did increase after the Sph2 treatment detected by flow cytometry. Therefore, Sph2 was likely an apoptosis-inducing factor of human L-02 liver cells.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.85-101
• /
• 2020

The optimal parameters for the fluid-structure interaction analysis using the Smoothed Particle Hydrodynamics (SPH) for fluids and finite elements for structures, respectively, are explored, and the effectiveness of the simulations with those parameters is validated by solving several open surface fluid problems. For the optimization of the Equation of State (EOS) and the simulation parameters such as the time step, initial particle spacing, and smoothing length factor, a dam-break problem and deflection of an elastic plate is selected, and the least squares analysis is performed on the simulation results. With the optimal values of the pivotal parameters, the accuracy of the simulation is validated by calculating the exerted force on a moving solid column in the open surface fluid. Overall, the SPH-FEM coupled simulation is very effective to calculate the fluid-structure interaction. However, the relevant parameters should be carefully selected to obtain accurate results.

• Nuclear Engineering and Technology
• /
• v.53 no.11
• /
• pp.3543-3562
• /
• 2021

The methods and performance of a 3D pin-by-pin neutronics code based on the 2D/1D decoupling method are presented. The code was newly developed as an effort to achieve enhanced accuracy and high calculation performance that are sufficient for the use in practical nuclear design analyses. From the 3D diffusion-based finite difference method (FDM) formulation, decoupled planar formulations are established by treating pre-determined axial leakage as a source term. The decoupled axial problems are formulated with the radial leakage source term. To accelerate the pin-by-pin calculation, the two-level coarse mesh finite difference (CMFD) formulation, which consists of the multigroup node-wise CMFD and the two-group assembly-wise CMFD is implemented. To enhance the accuracy, both the discontinuity factor method and the super-homogenization (SPH) factor method are examined for pin-wise cross-section homogenization. The parallelization is achieved with the OpenMP package. The accuracy and performance of the pin-by-pin calculations are assessed with the VERA and APR1400 benchmark problems. It is demonstrated that pin-by-pin 2D/1D alternating calculations within the two-level 3D CMFD framework yield accurate solutions in about 30 s for the typical commercial core problems, on a parallel platform employing 32 threads.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2553-2558
• /
• 2014

Military rotorcraft should be designed taking into account the condition of the fuel cell bullet impact. The internal fluid pressure, stress of metal fitting and fuel cell, bullet kinetic energy can be included as the design factor for the fuel cell. The best way to obtain the important design data is to conduct the verification test with actual product. But, the verification test requires huge cost and long-term effort. Moreover, there is high risk to fail because of the sever test condition. Thus, the numerical simulation is required to reduce the risk of trial-and-error together with prediction of the design data. In the present study, the bullet impact simulation based on SPH(smoothed particle hydrodynamics) is conducted with the commercial package, LS-DYNA. As the result of the numerical simulation, the internal pressure of fuel cell is calculated as 350~360MPa and the equivalent stress caused by hydro-ram effect is predicted as 260~350MPa on metal fittings.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.2
• /
• pp.71-78
• /
• 2014

There is a big risk of bullet impact because military rotorcraft is run in the battle environment. Due to the bullet impact, the rapid increase of the internal pressure can cause the internal explosion or fire of fuel cell. It can be a deadly damage on the survivability of crews. Then, fuel cell of military rotorcraft should be designed taking into account the extreme situation. As the design factor of fuel cell, the internal fluid pressure, structural stress and bullet kinetic energy can be considered. The verification test by real object is the best way to obtain these design data. But, it is a big burden due to huge cost and long-term preparation efforts and the failure of verification test can result in serious delay of a entire development plan. Thus, at the early design stage, the various numerical simulations test is needed to reduce the risk of trial-and-error together with prediction of the design data. In the present study, the bullet impact numerical simulation based on SPH(smoothed particle hydrodynamic) is conducted with the commercial package, LS-DYNA. Then, the resulting equivalent stress, internal pressure and bullet's kinetic energy are evaluated in detail to examine the possibility to obtain the configuration design data of the fuel cell.

• Journal of Korean Ophthalmic Optics Society
• /
• v.4 no.2
• /
• pp.129-133
• /
• 1999

For the myopia eyes of the people which are ametropia, the classified distribution has showed % for the simple myopic, 50% for the compound myopic astigmatism, 15% for the simple myopic astigmatism and 19% for the mixed astigmatism. The myopic ametropia for the both eyes has the distribution of 35% for -0.50D~-2.00Dptr, 54% for -2.00~6.00Dptr, and 11% for over -6.00Dptr. The classifying distribution for the age for the myopic ametropia was 54% for 15~20, 22% for 21~40, 14% for 41~60 and 10% for 61. The occupational distribution for the myopic ametropia has showed 61.5% for the student(Middle, High, College), 13.5% for the office worker, and 15% for the house wives as well as the small business. The hour affecting the refraction most for a day was after P.M. 7 which recorded 45% as the highest value. The reason is that the myopia degree decreases in the morning as the cornea flats and the situation is reversed in the afternoon so that there is a difference of Sph -0.50D and as getting darker the refraction degree of the light coming through the enlarged pupil refraction around the cornea is high. For the seasons the highest myopic degree has been recorded for 68% in the summer due to the shortage of nutrition and the climination inside the body by the exhaustion of sweat. In the blood types A and B are distributed closely as 34% and more active man with O has recorded higher myopic degree than woman. However woman showed higher accommodation power than man regardless the blood types. In the characteristic factors of myopic eye, the character feels fatigue easily has showed the distribution for 42% which is the highest and it could be classified largely by two the.

• Microbiology and Biotechnology Letters
• /
• v.33 no.2
• /
• pp.96-105
• /
• 2005

For screening of autoregulator receptor gene from Streptomyces longwoodensis, PCR was performed with primers of receptor gene designed on the basis of amino acid sequences of autoregulator receptor proteins with known function. PCR products were subcloned into the BamHIsite of pUC19 and transformed into the E. coli $DH5{\alpha}$. The isolated plasmid from transformant contained the fragment of 100 bp, which was detected on $2\%$ gel after BamHI treatment. The insert, 100 bp PCR product, was confirmed as the expected internal segment of gene encoding autoregulator receptor protein by sequencing. Southern and colony hybridizations with the 100 bp fragment as a probe allowed to select a genomic clone of S. longwoodensis, pSLT harboring a 4.4 kb SphI fragment. Nucleotide sequencing analyses revealed a 651 bp open reading frame(ORF) were isolated protein showing moderate homology ($35{\sim}46\%$) with the ${\Gamma}$-butyrolactone autoregulator receptors from Streptomyces sp., and this ORF was named sltR The sltR/pET-17b plasmid was constructed to overexpress the recombinant SltR protein (rSltR) in E. coli BL21 (DE3)/pLysS, and the rSltR protein was purified to homogeneity by DEAE-Sephacel column chromatography, and DEAE-5PW chromatography (HPLC). The molecular mass of the purified rSltR protein was 55 kDa by HPLC gel-filtration chromatography and 28 kDa by SDS-PAGE, indicating that the rSltR protein is present as a dimer. A binding assay with tritium-labeled autoregulators revealed that the rSltR has clear binding activity with a A-factor type autoregulator as the most effective ligand.