• 대한원격탐사학회지
• /
• 제33권6_3호
• /
• pp.1215-1221
• /
• 2017

SNAP(SeNtinel's Application Platform)은 유럽우주국이 개발한 공개 소프트웨어로서, SAR(Synthetic Aperture Radar)와 광학위성을 포함한 Sentinel 위성 시리즈에서 얻은 자료를 처리하는 여러개의 Toolbox로 이루어져 있다. 이 중 S1TBX(Sentinel-1 ToolBoX)는 주로 Sentinel-1A/B 영상과 간섭기법을 처리하기 위한 프로그램으로, Graph Builder와 같은 흐름도 방식의 자료처리 기법을 제공하고 DEM(Digital Elevation Model) 자동다운로드 및 모자이크 등을 포함한 편리한 기능을 탑재하고 있다. 프로그램 업데이트가 매우 활발하여, 컴퓨터 메모리가 충분하다면 InSAR(Interferometric SAR)와 DInSAR(Differential InSAR)의 수행이 원활해 최근 전세계적으로 널리 이용되고 있다. S1TBX에는 또한 기존의 타 SAR 위성 자료 처리기능을 포함하고 있으며, 최근 버전 5 이후에는 KOMPSAT-5의 처리 기능도 추가되었다. 이 연구에서는 SNAP의 S1TBX를 이용하여 KOMPSAT-5 SAR 영상의 간섭기법을 처리한 예를 보여주고 있다. 몽골 Tavan Tolgoi 노천탄광에서는 2015년도에 KOMPSAT-5로 얻어진 DEM과 2000년에 얻어진 SRTM 1sec DEM의 차이를 분석한 결과, 15년 동안 최대 130미터 깊이를 채굴하였고 쌓아놓은 광석의 높이가 70미터를 넘는 것을 확인하였다. 남극 장보고기지 인근 빙하지역에서는 타 프로그램에서는 조석과 지형 InSAR 신호가 관찰 되었으나, 궤도오차 및 DEM 오차로 SNAP으로는 처리가 불가했다. 또한 이라크 사막지역에서 여러 장의 DInSAR 영상이 만들어졌으나 시스템 오차로 보이는 줄무늬가 coherence 영상에 다수 발견되었다. StaMPS 적용을 위한 Stack은 궤도 오차 혹은 프로그램 버그로 인하여 불가했다. 최근 SNAP의 사용자가 급증하고 있고 업그레이드가 매우 빠르기 때문에 조만간 해결될 것으로 기대한다.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.187-192
• /
• 2009

A snap ring is a kind of metal spring with open ends which can be installed into a groove to prevent lateral movement. In this study a nonlinear finite element analysis model is developed to simulate the fastening process of a snap ring connecting the constant velocity joint and the transmission. Insert load, disengage load and breakage are three important issues. They are analyzed using the developed model. The load histories of simulations are similar to those of tests and the differences of maximum load are around 10%. Bending of the entire ring and unfolding of the end section are major contributors of the fastening load. The load variations caused by the angular position of spline tooth are about 50%. Breakage is highly sensitive to the position of a snap ring.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.372-373
• /
• 2008

The snap-through phenomena of the curved IPMC actuators were investigated according to the initial curvature of the actuators. The curved actuators were fabricated by long time thermal treatments. Cantilevered IPMCs have a constant curvature and their initial tip-displacements are 0, 8, and 16mm, respectively. These actuators were tested in terms of f response. AC response, FRF test for evaluating the effect of initial shape. The hysteresis and instant speed of tip point were measured for observation of the snap-through. Present results show that initial deformation strongly affects the snap-through phenomena, resulting in much larger tip-displacements.

• Structural Engineering and Mechanics
• /
• 제45권4호
• /
• pp.521-542
• /
• 2013

In this study a truss model is used for the geometrically nonlinear static and dynamic analysis of a thin shallow arch subject to snap-through. Thanks to the very simple geometry of a truss, the equilibrium conditions can be easily written and the global stiffness matrix can be easily updated with respect to the deformed structure, within each step of the analysis. A very coarse discretization is applied; so, in a very simple way, the high frequency modes are suppressed from the beginning and there is no need to develop a complicated reduced-order technique. Two short computer programs have been developed for the geometrically nonlinear static analysis by displacement control of a plane truss model of a structure as well as for its dynamic analysis by the step-by-step time integration algorithm of trapezoidal rule, combined with a predictor-corrector technique. These two short, fully documented computer programs are applied on the geometrically nonlinear static and dynamic analysis of a specific thin shallow arch subject to snap-through.

• Geomechanics and Engineering
• /
• 제32권5호
• /
• pp.541-551
• /
• 2023

Snap-buckling is one of the main failure modes of structures, because it will lead to the reduction of structural bearing capacity, durability loss and even structural damage. Boundary condition plays an important role in the research of engineering mechanics. Further discussion on the boundary conditions problems will help to analyze the dynamic and static behavior of structures more accurately. Therefore, in order to understand the dynamic and static behavior of curved beams more comprehensively, this paper mainly studies the nonlinear snap-through buckling and forced vibration characteristics of functionally graded graphene reinforced composites (FG-GPLRCs) curved beams with two different boundary conditions (including clamped-hinged and hinged-hinged) using Euler-Bernoulli beam theory (E-BBT). In addition, the effects of the curved beam radius, the GLPs distributions, number of GLPs layers, the mass fraction of GLPs and elastic foundation parameters on the nonlinear snap-through buckling and forced vibration behavior are discussed respectively.

• Journal of Microbiology
• /
• 제35권2호
• /
• pp.152-157
• /
• 1997

Infection of human fibroblast (HF) cells with human cytomegalovirus (HCMV) result in changes in the intracellular level of second messengers. Since nitric oxide (NO) production has been known to be related with other second messengers, it is probable that HCMV infection of HF cells may involve NO. To test this possibility, the amount of NO was measured following ogenous addition of NO generators such as sodium nitroprusside (SNP) or S-nitroso-N-a-cetylpenicillamine (SNAP) immediately after HCMV infection, however, inhibited virus multiplication. Furthermore, immunoblot experiment using monoclonal antibody to HCMV major immediate early (MIE) proteins or CAT assay using pCMVIE/CAT (plasmid containing CAT gene driven by HCMV MIE promoter) revealed that SNP or SNAP blocked the MIE gene expression. SNP was more effective than SNAP in hibiting HCMV multiplication or MIE gene expression. SNP produced more NO than SNAP in inhibiting HCMV multiplication or MIE gene expression. SNP produced more NO than SNAP. Although the mechanism for the inhibition of HCMV multiplication and MIE gene expression by NO is still elusive some correlation with NO-mediated inhibition of HCMV-induced increase in cytosolic free Ca$\^$2+/ concentration ([Ca$\^$2+/]) was observed. The increase of [Ca$\^$2+/] following HCMV infection was inhibited by SNP, and less effectively by SNAP. Raising [Ca$\^$2+/ with bromo-A23187 partially reversed the SNP block of MIE gene expression. Thus, there appear to e some relationships among NO. [Ca$\^$2+/], and HCMV MIE gene expression.

• 한국작물학회지
• /
• 제46권1호
• /
• pp.64-67
• /
• 2001

Snap bean is a new corp in Korea but believed to have a great deal of potentials for both domestic and overseas markets. The present study was performed to obtain the basic information about growth- and quality-related characteristics and to determinate the optimum seeding date and harvesting time for snap bean. Pod yield was significantly affected by seeding date. The highest pod yield was obtained from March 20 for determinate type and April 4 for indeterminate one, respectively, with the range of 13.0-23.7 t/ha. The pod length of indeterminate type was over 13cm, and the pod length was over 5 grams. The pod width for tested varieties was less than 1.0cm. Considering the pod growth characters such as pod length, pod width, and pod weight, the optimum harvesting time for immature pods of snap bean was supposed to be from 15 to 20 days after flowering. The daily yield of snap bean was begun to sharply increase from 15 days after the first flowering and the maximum yield was recorded at 30 days after flowering. For the accumulated yield, nearly 90% of total yield was obtained in 42 days after flowering.

• BMB Reports
• /
• 제39권1호
• /
• pp.91-96
• /
• 2006

Previously, we have shown that nitric oxide (NO) directly activates the Maxi-K channels. In the present study, we have investigated whether NO has prolonged effects on the Maxi-K channels reconstituted in lipid bilayer. Application of S-nitroso-N-acetyl-D, L-penicillamine (SNAP), a NO donor, induced an immediate increase of open probability (Po) of Maxi-K channel in a dose-dependent manner. When SNAP was removed from the cytosolic solution, the Po did not simply returned to, but irreversibly decreased to a level lower than that of the control Po. At 0.2 mM, (Z)-[N-(3-Ammoniopropyl)-N-(n-propyl)amino] diazen-1-ium-1,2-diolate (PAPA-NO), another NO donor, produced a similar increase of Po and decrease of Po upon washout. The increasing effects of SNAP on Po were not blocked by either 50 U/ml superoxide dismutase (SOD) or 2 mM N-ethylmaleimide (NEM) pre-treatments. However, NEM appears to be ineffective when applied after SNAP. These results suggest that NO can modulate Maxi-K channel via direct interaction and chemical modification, such as S-nitrosylation in the brain.

• 한국전기전자재료학회논문지
• /
• 제17권3호
• /
• pp.259-266
• /
• 2004

In this paper. a new two types of EST(Emitter Switched Thyristor) structures are proposed to improve the electrical characteristics including the current saturation capability. Besides, the two dimensional numerical simulations were carried out using MEDICI to verify the validity of the device and examine the electrical characteristics. First, a vortical trench electrode EST device is proposed to improve snap-back effect and its blocking voltage. Second, a dual trench gate EST device is proposed to obtain high voltage current saturation characteristics and high blocking voltage and to eliminate snap-back effect. The two proposed devices have superior electrical characteristics when compared to conventional devices. In the vertical trench electrode EST, the snap-back effect is considerably improved by using the vertical trench gate and cathode electrode and the blocking voltage is one times better than that of the conventional EST. And in the dual trench gate EST, the snap-back effect is completely removed by using the series turn-on and turn-off MOSFET and the blocking voltage is one times better than that of the conventional EST. Especially current saturation capability is three times better than that of the other EST.

• 동아시아식생활학회지
• /
• 제20권2호
• /
• pp.307-312
• /
• 2010

Sugar snap cookies were prepared with the addition of carrot powder (2~12%) as a source of dietary fiber. Analyses of physiochemical properties, rheology and sensory evaluation of the cookies were conducted. Increasing carrot powder content weakened the flour, as evidenced by decreased diameter and increased thickness, which resulted in decreased spread factor. The water content of the carrot powder-amended cookies and unamended flour was not significantly different. The pH and L values progressively decreased and a and b values progressively increased with increasing addition of carrot powder. Textural analysis revealed no significant differences in brittleness with carrot powder addition, even though brittleness did decrease with the addition of more carrot powder. Sensory evaluation revealed a preference for cookies prepared with 2~4% carrot powder, with decreased preference at powder concentrations exceeding 6%. Addition of a dried vegetable with high fiber content caused the dietary fiber to absorb much water content, resulting in decreased diameter, increased thickness and decreased spread factor. Therefore, it is deemed desirable to increase the spread factor by controlling the water content and adding emulsifiers so as to enhance the functionality and maintain the quality of cookies.