• Biomolecules & Therapeutics
• /
• v.20 no.3
• /
• pp.326-331
• /
• 2012

We recently reported that Val-SN-38, a novel valine ester prodrug of SN-38, had greatly improved the intracellular accumulation of SN-38 in MCF-7 cell line, probably through enhanced uptake via amino acid transporters. In the present study, the efficacy of Val-SN-38 was further investigated both in vitro and in vivo. It was found that the in vitro cytotoxic effect of Val-SN-38 was similar to that of SN-38. Moreover, Val-SN-38 exhibited an equal potency to that of SN-38 in survival experiments in vivo. Because these results seemed to be contrary to the previous finding, further investigation was performed to find out the underlying cause of the contradiction. As only the lactone form is known to have cytotoxic activity, the proportion of lactone in Val-SN-38 and SN-38 was determined, but no differences were found. However, it turned out that Val-SN-38 had poor stability compared with SN-38, which resulted in a decrease in beneficial efficacy for Val-SN-38. Overall, the present study showed that a valine-added prodrug approach could be advantageous provided that the stability of the compound can be ensured. We believe this is a noteworthy study that unravels the discrepancy between intracellular accumulation and efficacy of valine-added prodrug.

• Journal of The Korean Astronomical Society
• /
• v.38 no.2
• /
• pp.289-290
• /
• 2005

The 6th East Asian Meeting of Astronomy was held just at the time of 400 years after the discovery of SN (supernova) 1604 and its pre-maximum observation by the astronomers both from the East and the West in the 17th century. It has a special meaning and is interesting to look back on the historical observation of SN 1604. In this paper, we only limit to concern the Chinese observation on SN 1604.

• Journal of Korea Foundry Society
• /
• v.38 no.4
• /
• pp.75-81
• /
• 2018

This study examined the effect of the CaMgSn ternary phase on the aging response of the Mg-Sn-Zn alloy. The results revealed that the CaMgSn ternary phase formed in rod-like or needle-like shapes in Mg-3Zn-0.3Ca-xSn (x=1.5, 3, and 5 wt%) alloys and its size decreased as the Sn content increased from 1.5 wt% to 5 wt%. The Mg-3Zn-0.3Ca-5Sn alloy with a relatively fine CaMgSn phase was subjected to solution heat treatment and an aging process. Both the Mg-5Sn-3Zn-0.3Ca and Mg-5Sn-3Zn (base alloy) alloys had similar peak hardness values throughout all aging temperatures but the time-to-peak hardness in the Mg-5Sn-3Zn-0.3Ca alloy was 24-36 hours-earlier than that in the base alloy. Precipitates in the Mg-5Sn-3Zn-0.3Ca alloy were more refined than those in the Mg-5Sn-3Zn alloy and were mostly formed on basal planes. The $Mg_2Sn$ phase formed in either plate-like or rod-like shapes in the Mg-5Sn-3Zn alloy, whereas block-shaped $Mg_2Sn$ particles also formed in the Mg-5Sn-3Zn-0.3Ca alloy.

• The korean journal of orthodontics
• /
• v.25 no.4
• /
• pp.425-432
• /
• 1995

The purposee of this study is to investigate the correlation between the horizontal and vertical discrepancy of facial bones and the horizontal and vertical position of glenoid fossa. For this study, the cephalograms were taken to the adults over 18 of age(96 men and 108women). The cephalograms were divided into three groups according to the ANB angle(below 0.5 degree, 0.5 to 4.0 degree and above 38 degree), and they were divided into three groups according to the SN-MP angle(below 30 degree, 30 to 38 degree and above 38 degree). The following conclusions were obtained : 1. In the horizontal discrepancy of facial bone(ANB), the horiontal position of glenoid fossa(X) was anterior position as the order of Class II, Class I, Cias III. 2. The horizontal position of glenoid fossa(X) showed the significant correlation with ANB and SNB, but not with SNA. 3. In the vertical discrepancy of facial bone(SN-MP), thee less anglee was the greater vertical position of glenoid fossa (X) and was followed by the medium and high angle in order. 4. The vertical position of glenoid fossa(Y) showed thhat the SN-FH was the most significant correlation, and it was followed as the order of SN-FH, SN-MP and SN-OP angle. 5. There was the samllest length of anterior cranial base in the Class III malocclusion.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.3
• /
• pp.155-158
• /
• 2014

The phase transformation of Sn-Pb-Bi solder for photovoltaic ribbon during soldering was studied using real-time synchrotron x-ray scattering. At room temperature, Sn and Pb crystal phases in the solder existed separately. By heating to $92^{\circ}C$, a new PbBi alloy crystal phase was formed, which grew further up to $160^{\circ}C$. The Sn crystal phase first started to melt at $160^{\circ}C$, and was mostly melted at $165^{\circ}C$. In contrast, the Pb and PbBi crystal phases started to melt at $165^{\circ}C$, and were mostly melted at $170^{\circ}C$. The useful result was obtained, that the solder's melting temperature decreased from $183^{\circ}C$ to $170^{\circ}C$ by addition of a small amount of Bi atoms to the eutectic Sn62-Pb38 (wt%) solder. Our study first revealed the detailed in-situ phase transformation of Sn-Pb-Bi solder during heating to the eutectic temperature. Considering the results of peel strength and hardness, adding 1 wt% of Bi atoms to the Sn62-Pb38 (wt%) solder produced an appropriate composition.

• Korean Architects
• /
• s.643
• /
• pp.38-45
• /
• 2022

• Electrical & Electronic Materials
• /
• v.9 no.1
• /
• pp.38-43
• /
• 1996

A coprecipitation method was used for preparing Ca and Pt doped $SnO_2$ fine powder. Components of the powder were investigated by XPS and SIMS. Crystallite size and specific surface area were investigated by TEM, XRD, and BET analysis. $SnO_2$(Ca)/Pt based thick film devices were prepared by a screen printing technique for methane gas detection. Then sensing characteristics of the devices were investigated. As Ca and Pt added, the crystal growth of $SnO_2$ was suppressed during calcining and sintering, and the sensitivity of $SnO_2$(Ca)/Pt thick film to methane gas was enhanced. For the Pt doped $SnO_2$ fine particle, the thick film device shows sensitivity of about 83% to 2000 ppm methane gas at an operating temperature of >$400^{\circ}C$.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1117-1121
• /
• 2020

In this work, it was confirmed that a SnO2 catalyst deposited by an atomic layer deposition(ALD) process can be employed in AlGaN/GaN heterostructure FET to detect NO2 gas. The fabricated HFET sensors on AlGaN/GaN-on-Si platform demonstrated that the devices with or without n-situ SiN have sensitivity of 5.5 % and 38 % at 200 ℃, respectively with response to 100 ppm-NO2.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1410-1412
• /
• 2003

PTC 자기발열기판을 사용해서 저전력 방폭형 CO센서를 제작하고 그 특성을 고찰하였다. CO가스센서의 감지특성을 향상시키기 위하여 Pt가 island 형상을 갖는 다층 Pt/$SnO_2$ 박막구조를 도입하였으며, 이와 같은 구조는 Pt/$SnO_2$ 위에 다시 $SnO_2$ 및 Pt cluster 층들을 연속적으로 증착함으로서 제작되었다. 200ppm의 CO가스농도에서 측정된 다층 $Pt/SnO_2$박막 센서의 감도는 1.72($R_{air}/R_{CO}$)로, 단충 Pt/$SnO_2$ 박막 센서의 최대감도(1.23)보다 훨씬 더 높았다 이것은 Pt와 $SnO_2$사이의 계면적 증대에 기인하는 것으로 생각된다. 제작된 Pt/$SnO_2$ 가스센서의 평균 소비전력은 38.5mW이며, 측정농도범위($30{\sim}1,000ppm$)에서 매우 양호한 감지특성을 나타내었다.

• Korean Journal of Metals and Materials
• /
• v.46 no.1
• /
• pp.33-38
• /
• 2008

The interfacial reactions and shear strength of pure Sn solder bump were investigated with different under bump metallizations (UBMs) and reflow numbers. Two different UBMs were employed in this study: Cu and Ni. Cu6Sn5 and Cu3Sn intermetallic compounds (IMCs) were formed at the bump/Cu UBM interface, whereas only a Ni3Sn4 IMC was formed at the bump/Ni UBM interface. These IMCs grew with increasing reflow number. The growth of the Cu-Sn IMCs was faster than that of the Ni-Sn IMC. These interfacial reactions greatly affected the shear properties of the bumps.