• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제3권3호
• /
• pp.159-167
• /
• 1999

This study performed experiments for measuring corrosion potential and current density variations in the polarzation curves of polyvinylchloride. The results were examined to identify particular influences affectingthe corrosion potential such as temperature, pH, enzyme, and salt. The lines representing active anodic dissolution were only slightly shifted in the potential direction by temperature, pH, enzyme and salt. The Tafel slope for the anodic dissolution was determined using the polarization effect with varying conditions. The slope of the polarization curves describing the active-to-passive transition region was noticeably shifted in the potential direction. In addition, using the variation in conditions, the best temperature and pH were determined for the corrosion rate, and resistance of corrosion. The second anodic current density peak and maximum passive current density were designated as degraded(IP/I0). The value of IP/I0 was used in measuring the extent of the degradation of the polyvinychloride. The potentiodynamic parameters of the corrosion were obtained using a Tafel plot.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권3호
• /
• pp.165-171
• /
• 2000

Experiments were carried out to measure variations in the oxidation potential and current density using the polarization curves of polycarbonate. The results were then examined to identify the influences affecting the oxidation potential related to various conditions, such as temperature, pH, and oxydase(citrate and lipase). The lines representing the active anodic and cathodic dissolution shifted only slightly in the potential direction relative to temperature, pH, and the effect of the enzyme. The Tafel slope for the anodic and cathodic dissolution was determined such that the reversibility polarization was indicated as being effected by various conditions. The slope of the polarization curves describing the active-to-passive transition region shifted noticeably in their direction. Also, by varying the conditions, the optimum conditions for the most ready transform were identified, including temperature, pH, oxidation rate, and resistance of oxidation potential. The critical oxidation sensitivity(I(sub)r/I(sub)f) of the anodic current density peak and maximum passive current density was also determined, which is used in measuring the critical corrosion sensitivity of a polycarbonate.

• Geomechanics and Engineering
• /
• 제23권5호
• /
• pp.481-491
• /
• 2020

Piles installed in row(s) are used as an effective technique to improve the stability of soil slopes. The analysis of pile-stabilized slopes require a reliable prediction of lateral resistance offered by the piles. In this work, an analytical solution is developed to estimate the lateral resistance offered by the stabilizing piles in sand and c - 𝜙 soil slopes considering soil arching phenomenon. The soil arching in both horizontal direction (between the neighboring piles) and vertical direction (in the active wedge in front of the pile row) are studied and their effects are incorporated in the proposed model. The shape of soil arch is assumed to be circular and principal stress trajectories are defined separately for both modes of arching. Experimental and numerical studies found in literature were used to validate the proposed method. A detailed parametric analysis was performed to study the influence of pile diameter, center-to-center spacing, slope angle and angle of internal friction on the lateral pile resistance.

• 제어로봇시스템학회논문지
• /
• 제7권7호
• /
• pp.597-604
• /
• 2001

Recently, the study of the moving sliding mode in the variable structure control is in progress ac-tively. The conventional time-invariant sliding model control can\`t guarantee the sliding mode in the reaching phase, which is robust against the uncertainty. But with the time-varying method, the controller makes the states track the desired trajectories and keeps the sliding mode. Nevertheless, the piecewise continuous method of the past still has the reaching mode. Thus we propose the continuously moving sliding surface by the fuzzy algorithm. The proposed algorithm is made of the fuzzy rule considering both the error and the error velocity, and may apply to the entire phase plane without sacrificing sliding mode. Especially the proposed scheme can rotate tot he slope-decreasing direction, needless to say rotating to the slope-increasing direction. For showing that the proposed controller guarantees the sliding model and ensures the robustness, we apply the proposed method to the two-link robot manipulator simulation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.1086-1091
• /
• 2009

The purpose of this study is to provide the technical information of the stability change and behaviour characteristics in case upward direction of soil nailing is installed. Generally, the soil nailing which installed in case of vertical excavation or for the purpose of the slope stability is installed between 5 to 15 degree of downward direction. The downward direction of the soil nailing method has lots of advantages such as the increase of the stability, the convenience of the grout compared to upward direction of soil nailing. Even though the upward direction of the soil nailing has the disadvantages in terms of the stability and the grout construction, horizontal displacement tends to be decreased.

• 지구물리
• /
• 제9권3호
• /
• pp.189-197
• /
• 2006

The Korea Plateau is a continental fragment rifted and partially segmented from the Korean Peninsulaat the initial stage of the opening of the East Sea (Japan Sea). We interpreted marine seismic profiles from the South Korea Plateau in conjunction with swath bathymetric to investigate processes of con-tjnental rifting and separation of the southwestern Japan Arc. The SouU-i Korea Plateau preserves funda-mental elements of rift architecture comprising a seaward succession of a rift basin and an uplifted rift flank passing into the slope, typical of a passive continental margin. Two distinguished rift basins (Onnuri and Bandal Basins) in the South Korea Plateau are bounded by major synthetic and smaller antithetic faults, creating wide and symmetric profiles. The large-offset border fault zones of these basins have convex dip slopes and demonstrate a zig-zag arrangement along strike. Rifting was primarily controlled by normal faulting resulting from extension orthogonal to the inferred line of breakup along the base ofthe slope rather U-ian strike-slip deformation. Two extension direcdons for rifdng are recog-nized; U-ie Onnuri Basin was rifted in U-ie EW direction; U-ie Bandal Basin in U-ie EW and NW-SE directions, suggesting two rift stages. We interpret that the E-W direction represents initial rifting at the inner margin; while the Japan Basin widened, rifting propagated repeatedly from the Japan Basin to the southeast toward the Korean margin but could not penetrate the strong continental lithosphere of the Korean Shield and changed direction to the south, resulting in E-W extension to create the rift basins at the Korean margin. The Hupo Basin to the south of the Korea Plateau is estimated to have formed in this process. The NW-SE direction probably represents the direction of rifting orthogonal to the inferred line of breakup along the base of the slope of the South Korea Plateau; after breakup the southwestern Japan Arc separated in the SE direction, indicating a response to tensional tectonics associated with the subduction of the Pacific Plate in the NE direction. We suggest that structural evolution of the eastern Korean margin can be explained by the processes occurring at the passive continental margin.

• 한국동물학회:학술대회논문집
• /
• 한국동물학회 1995년도 한국생물과학협회 학술발표대회
• /
• pp.189.2-189
• /
• 1995

No Abstract, See Full Text

• 한국지형학회지
• /
• 제25권4호
• /
• pp.103-116
• /
• 2018

The purposes of this research are as follows: First, to reconstruct the optimal locational environment of the Bronze Age settlement in Cheonan Baekseok-dong (hereinafter referred to as the study settlement). Second, to identify the priority ranking of the topographical factors that influenced the Bronze Age people when selecting their the settlement location. For these reasons, the topographical factors of the 200 Bronze Age dwellings (hereinafter referred to as dwellings) confirmed in the survey area were analyzed through the ridge's environmental perspective. The results are asfollows: First, the optimal ridge environment of the Bronze Age settlement is largely a sub-ridge in N-S direction (for example, NNW-SSE, N-S, NNESSW), especially at the top (Crest slope, Crest flat) of the south-facing aspect of the ridge. Second, when the Bronze Age dwellers selected a residential location, they carefully considered topographical factors in the following order: (1) the slope direction of the ridge surface, (2) the micro-landform of the ridge, (3) the ridge scale, (4) the ridge direction, and (5) the surface relief. The results of this study could be used as basic data in related fields such as archaeology, quaternary research, and traditional architecture and so on.

• 한국운동역학회지
• /
• 제27권4호
• /
• pp.269-278
• /
• 2017

Objective: The purpose of this study was to develop a goal setting method for increasing the probability of a holed in a side inclined putting stroke. Method: Three-dimensional video data was recorded at a frequency of 120 hz per second after synchronizing 19 infrared motion capture systems (Qualisys, Gothenburg, Sweden). Putting green used a polycarbonate plate ($1.2{\times}2.4{\times}0.01meter$) with coefficient of friction (${\mu}=0.062$) and a real curve of the actual hole. Results: The velocity ratio between the club and the ball was 1:1.6 under various ball speed conditions in this study. The overall position of the break is 1 m to 1.4 m from the point where the ball leaves. If there is a slope, the ball follows the target line by the straightening force, and when it reaches 1 m position, the straightening force decreases by 30~50% and reaches to the deviation (break) point which is severely influenced by the slope. From here, the ball is aimed in a direction other than the target, and the size is affected by the slope. Conclusion: If there is a side slope, the ball moves away from the straight line, and the larger the slope, the closer the break point is to the starting point of the ball. Therefore, it is necessary to calculate the degree of departure according to the slope carefully, and it is preferable that the slower the speed is, the more the influence of the slope becomes. It is preferable to use the center of the hole as a reference when calculating the departure.

• 한국지반공학회논문집
• /
• 제15권3호
• /
• pp.27-40
• /
• 1999

사면안정해석을 수행하기 위하여 많이 사용하는 한계평형방법은 일정한 가정을 하여 안전율을 평형에 필요한 응력과 흙의 전단강도의 비로 정의하여 대상사면의 안전율을 구한다. 유한요소법을 이용한 사면안정해석방법은 응력상태를 유한요소법으로 구한 후 원호나 대수나선형등의 일정한 모양의 사면 파괴선을 가정하여 반복적으로 최소안전율을 구한다. 본 연구에서는 유한요소법을 이용한 사면안정해석방법을 개발하여 사면의 가장 취약한 부분을 따라 파괴선이 발생하도록 하였다. 이것은 요소내의 국부안전율과 파괴각을 고려하여 사면파괴선을 자동적으로 구할 수 있도록 함으로써 가능한데 이 방법은 임의의 파괴선을 가정할 필요가 없으며 절편에 작용하는 힘에 대하여 가정을 할 필요가 없고 임의의 모양의 파괴선을 구할 수 있는 장점이 있다. 본 연구에서는 개발된 해석방법을 검증하기 위하여 가상의 사면, 자연사면, 그리고 댐사면에 적용하여 실무에서 많이 사용하는 한계평형방법 프로그램인 STABL5M과 SLOPE/W과 비교 평가하였다.